Topic: What's your Mhash/s? (Pissing contest here) - page 79. (Read 144003 times)
With the right flags, I hover around 194 MHash/s on my 5770. Cut that in half if I'm watching YouTube instead of Netflix.
Gaming rig:
6970 @ stock clocks with -v -w128 flag is getting 361 Mhash/s (not interested in OCing it or tweaking too much at this point since it's not a dedicated mining rig)
6770 Quadfire rig:
Parts are not all here yet, but it should be doing 1000+ Mhash/s when it's finished.
6970 @ stock clocks with -v -w128 flag is getting 361 Mhash/s (not interested in OCing it or tweaking too much at this point since it's not a dedicated mining rig)
6770 Quadfire rig:
Parts are not all here yet, but it should be doing 1000+ Mhash/s when it's finished.
I average 5000 MH/s with my "farm"
a mixture of gpus and cpus totalling 524mh/s 
No problem pazor 
Set memory to 300, Seems to bomb any lower/higher around that figure. 300 is fine, no need to go lower than that. No gain. These sapphires can do 900 in most cases without over volting. Im 1020/300 on 1 and 1025/300 @ 1.218V stable. Other new revision which for some reason Over Volts?
? is 1000/300 @1.193V but wont go over 1000 core, no matter what. All other new revisons (sapphire xtreme) dont over volt! 230SA varient. I have a new revision thats sitting doing 1020/300 @ 1.088 Stock voltage. But wont over volt. Looking like its still luck of the draw
3 x 5850 (sapphire xtreme) under Linuxcoin. It freezes sometimes so I OC them just a little:
- Core: 750Mhz
- Mem: 250Mhz
I can OC one or two of them, but not all at the same time (freezes)... Maybe a PSU problem? It's the Corsair TX850.
A total of 900Mhash/s. Temps are ok (62-67ºC, fan in auto), I set the voltage to 0.95 and seems more stable. More parts:
- Mainboard Asrock extreme3 870
- Sempron 140
A power-meter says 345w at AC power plug.
- Core: 750Mhz
- Mem: 250Mhz
I can OC one or two of them, but not all at the same time (freezes)... Maybe a PSU problem? It's the Corsair TX850.
A total of 900Mhash/s. Temps are ok (62-67ºC, fan in auto), I set the voltage to 0.95 and seems more stable. More parts:
- Mainboard Asrock extreme3 870
- Sempron 140
A power-meter says 345w at AC power plug.
Set memory to 300, Seems to bomb any lower/higher around that figure. 300 is fine, no need to go lower than that. No gain. These sapphires can do 900 in most cases without over volting. Im 1020/300 on 1 and 1025/300 @ 1.218V stable. Other new revision which for some reason Over Volts?
? is 1000/300 @1.193V but wont go over 1000 core, no matter what. All other new revisons (sapphire xtreme) dont over volt! 230SA varient. I have a new revision thats sitting doing 1020/300 @ 1.088 Stock voltage. But wont over volt. Looking like its still luck of the draw
I have
3 x 5850's Im a novice ocing so pulling 1000m/h with these
1 x 5870 and getting 400m/h with this.
So all in 1400m/h. Not bad for spare parts laying about the house!!
Thats on 2 rigs tho. I board using 3 cards the other one is in an old single slot mobo
3 x 5850's Im a novice ocing so pulling 1000m/h with these
1 x 5870 and getting 400m/h with this.
So all in 1400m/h. Not bad for spare parts laying about the house!!
Thats on 2 rigs tho. I board using 3 cards the other one is in an old single slot mobo
3x 5850 about 1100 MH/s
Set them 1.193V 990/300 and use diablo miner vectors 2 worksize 256 agression 13. that should get you near 1200 all day long. 1.2V should do 1000 on 90% of the cards by my ratings so far. I have 11 and 1 doesnt. Shapphire xtreme i have though.... not sure on yours. But diablo as WAY less stales than phoenix, 0.3 compared to 1.4% for me. Sufficent cooling around the cards will be needed though. Cases arnt so good for this
2 of them (5850sapphire xtreme) running GPU 900 MEM 158 @ 70°C and other one (5850 his radeon) on 900@300 @ 71°C in closed case with low cooling. working 24/7
miner winxp 64 / diablominer and Linux / phoenix
but thanks for the advice
3 x 5850 (sapphire xtreme) under Linuxcoin. It freezes sometimes so I OC them just a little:
- Core: 750Mhz
- Mem: 250Mhz
I can OC one or two of them, but not all at the same time (freezes)... Maybe a PSU problem? It's the Corsair TX850.
A total of 900Mhash/s. Temps are ok (62-67ºC, fan in auto), I set the voltage to 0.95 and seems more stable. More parts:
- Mainboard Asrock extreme3 870
- Sempron 140
A power-meter says 345w at AC power plug.
- Core: 750Mhz
- Mem: 250Mhz
I can OC one or two of them, but not all at the same time (freezes)... Maybe a PSU problem? It's the Corsair TX850.
A total of 900Mhash/s. Temps are ok (62-67ºC, fan in auto), I set the voltage to 0.95 and seems more stable. More parts:
- Mainboard Asrock extreme3 870
- Sempron 140
A power-meter says 345w at AC power plug.
those pictures make me cry 
well, im still building my rig, but so far i have.
1 x 6990
1 x 5770
Doing around 1100 mhashes.
But there is a problem, the more i have to more i want
well, im still building my rig, but so far i have.
1 x 6990
1 x 5770
Doing around 1100 mhashes.
But there is a problem, the more i have to more i want
3x 5850 about 1100 MH/s
Set them 1.193V 990/300 and use diablo miner vectors 2 worksize 256 agression 13. that should get you near 1200 all day long. 1.2V should do 1000 on 90% of the cards by my ratings so far. I have 11 and 1 doesnt. Shapphire xtreme i have though.... not sure on yours. But diablo as WAY less stales than phoenix, 0.3 compared to 1.4% for me. Sufficent cooling around the cards will be needed though. Cases arnt so good for this
2 x 6990 = 1600Mhash/s
4 x 5570 = 280Mhash/s
4 x 5570 = 280Mhash/s
I'm running a 6950 and 5830 at 680MHash atm.
3x 5850 about 1100 MH/s
Impressive, Thats not bad but i have 5850's that can get near that. All of them over 400. i think ill wait see what the 28nm die shrink on the 7 series will be capable of. I think ATI as picked up on there success in the mining industry so more cores may not be out of the question.... we can only hope
Howdy people,
I am running 2 x Sapphire 6970's crossfired @ 950MHz core on each, i get 423 MHash/s from each card.
Win 7 64x,
I am wondering if anyone else running 6970's get any higher hash/s ?
Cheers, Gumby
I am running 2 x Sapphire 6970's crossfired @ 950MHz core on each, i get 423 MHash/s from each card.
Win 7 64x,
I am wondering if anyone else running 6970's get any higher hash/s ?
Cheers, Gumby
~2000 mhashes
2x5870
2x5970
I'm pretty sure I can get around 2500 mhashes once I sort out the cooling (4x cards in 1 machine) - seems to overheat.
Clocks are low
5970 = 4x 670
5870 = 2x 825
2x5870
2x5970
I'm pretty sure I can get around 2500 mhashes once I sort out the cooling (4x cards in 1 machine) - seems to overheat.
Clocks are low
5970 = 4x 670
5870 = 2x 825
5 - asus 6870 ~310 mh/s ea
2 - xfx 6870 ~ 320 mh/s ea
1 - xfx 6950 ~ 380 mh/s
3 rigs total
So ~ 2.57 Gh/s cant really complain,
deepbit quotes 2700 mh/s all the way down to 2100 mh/s
http://deepbit.net/userbar/4ddcedc08161977846000028_cc3c27b828.png
2 - xfx 6870 ~ 320 mh/s ea
1 - xfx 6950 ~ 380 mh/s
3 rigs total
So ~ 2.57 Gh/s cant really complain,
deepbit quotes 2700 mh/s all the way down to 2100 mh/s
http://deepbit.net/userbar/4ddcedc08161977846000028_cc3c27b828.png
I've got 3 Main Rigs Going now..
Rig 1: Athlon 4200+ X2 2.2 GHz 2GB DDR2 800MHz Ram Sapphire AMD Radeon HD 6570s 1GB (GGDR3) (Low Power 48 Watt Per Card) x 4
Hash Rate: 120.8 Megahash/sec per Card - Total: 483.3 Megahash/sec
Rig 2: Athlon 6400+ X2 3.86 GHz 8 GB DDR2 800MHz Sapphire AMD Radeon HD 6870 2 GB (GDDR5) x 2
Hash Rate: 340 x 2 Megahash/sec (Hardware Unlocked / Firmware Flashed / Overclocked Core by 350 MHz Underclocked Memory by 280 Mhz) - Total - 680 Megahash/sec
Rig 3: Phenom X4 3.88 GHz 64 GB DDR3 1888 MHz Ram Sapphire AMD Radeon HD 6990 4GB (GDDR5) (Hardware/Firmware Flashed Underclocked Memory by 100 Mhz)
Hash Rate: 835 Megahash/s
Grand Total (Roughly xD): 1998.03 Megahash/sec (1.99803 GH/s)
Rig 1: Athlon 4200+ X2 2.2 GHz 2GB DDR2 800MHz Ram Sapphire AMD Radeon HD 6570s 1GB (GGDR3) (Low Power 48 Watt Per Card) x 4
Hash Rate: 120.8 Megahash/sec per Card - Total: 483.3 Megahash/sec
Rig 2: Athlon 6400+ X2 3.86 GHz 8 GB DDR2 800MHz Sapphire AMD Radeon HD 6870 2 GB (GDDR5) x 2
Hash Rate: 340 x 2 Megahash/sec (Hardware Unlocked / Firmware Flashed / Overclocked Core by 350 MHz Underclocked Memory by 280 Mhz) - Total - 680 Megahash/sec
Rig 3: Phenom X4 3.88 GHz 64 GB DDR3 1888 MHz Ram Sapphire AMD Radeon HD 6990 4GB (GDDR5) (Hardware/Firmware Flashed Underclocked Memory by 100 Mhz)
Hash Rate: 835 Megahash/s
Grand Total (Roughly xD): 1998.03 Megahash/sec (1.99803 GH/s)
4.6G/hashes. More on the way
What are you running?
4.6G/hashes. More on the way
Jump to: