. S3 time baby. 
Topic: Why is BITMAIN selling used products ? (Read 3888 times)
Looks like to clear out all the 55nm Product, . S3 time baby.
. S3 time baby. 
we need to get some mexican asic companies!!!
Is it an ancient Chinese tradition to sell used stuff as new ? 
No They build the product, test to ensure it is working and promptly ship upon order. What is the issue? This is a ridicules thread.
It is just an idealistic presumption...but in reality NOT true...
Simply stated...:
This IS the BUSINESS MODEL of if not all, MOST of the miner gear manufacturers...Capisco...?
BitMain, KnC, numerous Dragon Chinese clonings...you name it...are producing miners...and immediately put them to mine...to recuperate as much of the production cost as they can...allowing them to compete on prices...and as soon as they got our orders...same miners are flush to us...with as much profit as they can squeeze out of us..."the foreigners'...Capisco again...?
The same thing like some of individual miners among us are mining for a week...or two...or 1-2 months...and flushing them on E-Bay for some profit...from mining or selling...or both...
The only difference is that this E-Bay tactics is now promoted to corporate business model...some have advantage to be a real manufacturers...the rest...mostly Chinese ...are simply reselling the miners they can get...earlier and cheaper then most of us here...
That's it...Nothing more...and they will NOT change this...the way they make MONEY...I hope all of you "Capisco" now...
Cheers,
ZiG
My only comment would be that BitMain has a track record of delivering quite quickly. With that, I guess I don't care if they have "burned-in" the miner that I purchased, ensured it is working, and taken in any BTC that they accumulated from this activity. I would highly prefer the BitMain business model over the BFL, KnC, CoinTerra, [insert favorite scamming manufacturer here] model where they mine for Bitcoin with purchased hardware and delay, delay, delay the shipment.
just an FYI for the uninitiated - mainlanders are NOTHING like the well-groomed westernised version you may fantasize over.
they are known around the world for pissing, spitting, shitting in public among other unhygenic practices.
BLund3rdog -That was a 'ridicul3s' post!!
if you genuin3ly fail to s33 th3 issu3, how about minding your own busin3ss, ie poor spelling, and k33p your gu3sstimations & ignoranc3 to yours3lf?
they are known around the world for pissing, spitting, shitting in public among other unhygenic practices.
BLund3rdog -That was a 'ridicul3s' post!!
if you genuin3ly fail to s33 th3 issu3, how about minding your own busin3ss, ie poor spelling, and k33p your gu3sstimations & ignoranc3 to yours3lf?
Recently bought many antminers and 29% of them were obviously used.
PCB's, fan, aluminum heatsink were full of dust. I had to air pressure clean the heatsink and big chunks of dirt came out.
How can a big name like BITMAIN do this (from my reading, i am far from being the only one).
Is it an ancient Chinese tradition to sell used stuff as new ?
PCB's, fan, aluminum heatsink were full of dust. I had to air pressure clean the heatsink and big chunks of dirt came out.
How can a big name like BITMAIN do this (from my reading, i am far from being the only one).
Is it an ancient Chinese tradition to sell used stuff as new ?
No more "ancient Chinese" than new American tradition. See BFL for case in point.
You might want to stick to the company and lay off the nationality / race / culture angle. No one likes the racial overtones even from a fellow Quebecois d'accord?
ANY American ASIC manufacturer for that matter....BFL,Hashfast,Cointerra,did I miss any....they all suck big balls.Very disappointed in my country
GO CHINA!!!!!!!!!!!!!!!!!!!!!
I just may move there...I love their women too They build the product, test to ensure it is working and promptly ship upon order. What is the issue? This is a ridicules thread.
It is just an idealistic presumption...but in reality NOT true...
Simply stated...:
This IS the BUSINESS MODEL of if not all, MOST of the miner gear manufacturers...Capisco...?
BitMain, KnC, numerous Dragon Chinese clonings...you name it...are producing miners...and immediately put them to mine...to recuperate as much of the production cost as they can...allowing them to compete on prices...and as soon as they got our orders...same miners are flush to us...with as much profit as they can squeeze out of us..."the foreigners'...Capisco again...?
The same thing like some of individual miners among us are mining for a week...or two...or 1-2 months...and flushing them on E-Bay for some profit...from mining or selling...or both...
The only difference is that this E-Bay tactics is now promoted to corporate business model...some have advantage to be a real manufacturers...the rest...mostly Chinese ...are simply reselling the miners they can get...earlier and cheaper then most of us here...
That's it...Nothing more...and they will NOT change this...the way they make MONEY...I hope all of you "Capisco" now...
Cheers,
ZiG
They build the product, test to ensure it is working and promptly ship upon order. What is the issue? This is a ridicules thread.
Bitmain is just testing those puppies out, real quick!
i wonder sometimes if people arent just basing their so called opinions upon their own experiences and ignoring the FACTS that many many people have been shipped late, broken, dirty, damaged, used hardware.
of which some report perfection, closely followed by back pedalling and less than perfection.
simply put, some people have had good experiences, they should share that and only that - not some made up parables about what they imagine others to be going through.
Bitmain promised reasonable compensation for late, broken hardware - a month later and all he can come up with is more 'virtual coupons' making the compensation actually a rouse.
spend more & rather than fix your crap, ill give you a 'discount' that isnt actually a reasonable discount & has been given freely to probably thousands of people. (but lets call it compensation so you feel better if you are dense/retarded)
vulgar!
of which some report perfection, closely followed by back pedalling and less than perfection.
simply put, some people have had good experiences, they should share that and only that - not some made up parables about what they imagine others to be going through.
Bitmain promised reasonable compensation for late, broken hardware - a month later and all he can come up with is more 'virtual coupons' making the compensation actually a rouse.
spend more & rather than fix your crap, ill give you a 'discount' that isnt actually a reasonable discount & has been given freely to probably thousands of people. (but lets call it compensation so you feel better if you are dense/retarded)
vulgar!
Right, what I mean is that we have not seen any asian company developing and finishing a complete 28nm product so far.
I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
Innosilicon is a Chinese company....I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
They have developed both the 28nm A1 and 28nm A2 (which is a litecoin mining chip).
At the end of the day, the only thing that matters is power consumption. If they can get 0.5W at 32nm, i don´t care.
Anything above that would be bad, as Bitfury already sells 0.785W/GH 3.5 TH miners.
He also got a good funding round of 20M USD. He is either going to mass produce that rig or do a die shrink to get even better power consumption. (or both)
There really shouldn´t be much of a market for 1w/GH devices come August.
Innosilicon sells clone chips as designed by Bitmine or not??
What development did they make?
Bought dozens of S1 from Bitmain - all of them without any major issues (maybe little dust sometimes). Never had to return a single unit, all of them were hashing without any problems.
I had way more issues with PSUs than with S1s :/
I had way more issues with PSUs than with S1s :/
Right, what I mean is that we have not seen any asian company developing and finishing a complete 28nm product so far.
I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
Innosilicon is a Chinese company....I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
They have developed both the 28nm A1 and 28nm A2 (which is a litecoin mining chip).
At the end of the day, the only thing that matters is power consumption. If they can get 0.5W at 32nm, i don´t care.
Anything above that would be bad, as Bitfury already sells 0.785W/GH 3.5 TH miners.
He also got a good funding round of 20M USD. He is either going to mass produce that rig or do a die shrink to get even better power consumption. (or both)
There really shouldn´t be much of a market for 1w/GH devices come August.
Right, what I mean is that we have not seen any asian company developing and finishing a complete 28nm product so far.
I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
I am curious to see it with Bitmain, but I have they feelling that they will make a smaller jump down to 40nm rather than 28nm.
Just my thoughts.
I wonder why the do not open preorders like the did with the S2 Batch1.
I am so curious to see an asian company producing a 28nm product.
I am not referring to clones designed by Bitmine.
The A1 chip is actually owned by Innosilicon. I am so curious to see an asian company producing a 28nm product.
I am not referring to clones designed by Bitmine.
Bitmine only has the right to chip sales in Europe (and America?) because they payed a part of the development cost.
Bitmine just didn´t see that chinese companies would sell the finished product all over the world.
I wonder why the do not open preorders like the did with the S2 Batch1.
I am so curious to see an asian company producing a 28nm product.
I am not referring to clones designed by Bitmine.
I am so curious to see an asian company producing a 28nm product.
I am not referring to clones designed by Bitmine.
I heard that Bitmains` S3 28nm chip should be out soon.
I guess it will hit the market sometime around the sp30. Will be interesting how their power usage will be, as their 55nm chip only gets ~1.1W/GH in deployed equipment.
However, that should be enough to get to around 0.5W/GH at 28 nm. Let´s see wether they will be delayed with their chips or not.
@ topic
Ofcourse they sell used equipment. They build in huge batches and then deploy at their DCs.
They then sell as much as they can, giving you 3 months guarantee on the equipment. Atleast they know it will work well.
I guess it will hit the market sometime around the sp30. Will be interesting how their power usage will be, as their 55nm chip only gets ~1.1W/GH in deployed equipment.
However, that should be enough to get to around 0.5W/GH at 28 nm. Let´s see wether they will be delayed with their chips or not.
@ topic
Ofcourse they sell used equipment. They build in huge batches and then deploy at their DCs.
They then sell as much as they can, giving you 3 months guarantee on the equipment. Atleast they know it will work well.
Recently bought many antminers and 29% of them were obviously used.
PCB's, fan, aluminum heatsink were full of dust. I had to air pressure clean the heatsink and big chunks of dirt came out.
How can a big name like BITMAIN do this (from my reading, i am far from being the only one).
Is it an ancient Chinese tradition to sell used stuff as new ?
PCB's, fan, aluminum heatsink were full of dust. I had to air pressure clean the heatsink and big chunks of dirt came out.
How can a big name like BITMAIN do this (from my reading, i am far from being the only one).
Is it an ancient Chinese tradition to sell used stuff as new ?
No more "ancient Chinese" than new American tradition. See BFL for case in point.
You might want to stick to the company and lay off the nationality / race / culture angle. No one likes the racial overtones even from a fellow Quebecois d'accord?
If Bitmain will not start selling a new product quickly, like the mentioned 28nm, will be in real trouble.
The competition is getting very very strong.
The competition is getting very very strong.
Bitmain had great success with S1. S2 am not sure but from what I read was not a great success.In a china conference they said its goind to be an S3 with 28nm chips.Not yet released but they will need it
Jump to: