EDIT: 3-28-2013 It has been one year since I started selling my cables here to help the FPGA mining community and I just wanted to say thank you for keeping this endeavor going. I always new it was a niche project but it was fun and allowed me to positively occupy my time.
Thank you guys again.
Because of current BTC pricing I will no longer list my prices as they become irrelevant too quickly. Just PM me for a quote.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have made some ATX to barrel plug adapters for my BFL singles.
Some people may not want to be bothered making up there own custom cables
or losing precious efficiency with the BFL supplied power bricks.
These cables will also fit the Icarus or ztex FPGA or any 12V 2.5/5.5mm DC plug peripheral. I can also do 2.1/5.5 DC plugs which are found on the x6500.
I can make cable adapters or direct to modular PSU connectors.
Here are the base type cables that I currently make:
These cables are 32" long with 2.5/5.5mm center +ve barrel plugs at a pitch of 8" for BFL single spacing.
For my needs I have used an EPS12V and a direct to PSU PCIE connector (for simpler cable management).
I can easily change the: pitch -> distance between barrel plugs
connector type -> EPS12V, PCIE, 4 pin CPU, even direct to PSU connections (with a properly supplied pinout)
length -> depending on your application
wire thickness -> 18AWG is standard but also have 16AWG for longer runs or BFLs
sleeving -> I find it aids in cable management (buyers choice)
I also now provide switches for your ATX power supplies if it is not the host system: Can be for modular and non-modular types. Pricing is
Please PM each
Here is a cable for powering a Raspberry Pi from an ATX PSU.
Larger quantities are not a problem as well. Fast turnaround time and shipping!
The
base type cable specs are (up to 6' long, custom pitch, 18AWG, up to 3 barrel plugs, male PCIE connector, sleeve/heatshrink) I am asking
Please PM which includes shipping within USA.
Further customized cables may be more depending on the work or materials needed.Disclaimer: I take no responsibility for the improper use of these cables. They will be wired accordingly and tested to work on your PSU and FPGAs to power them. Incorrect use of these cables that causes damage to your PSU or FPGAs is not my responsibility. Receipt of payment confirms these statements. Caution: It is possible to connect a 12vEPS from a PSU into the 6pin or 8pin PCIE power cable I provide. The polarities of these two cables are opposite and could damage your hardware!!!
Be very certain when ordering and using my cables that you know which are which!!!Please PM me if you are interested. Any questions, post away.
EDIT: 3/29/2012 - Clarified some points and added disclaimer.
4/26/2012 - Added cautionary statement about polarity.
5/27/2012 - Added switches to products available and editing
7/6/2012 - Changed pricing due to exchange rates
8/2/2012 - Rally Pricing!!!
8/15/2012 - Rally Pricing Again!!!
3/28/2013 - Anniversary acknowledgement
9/18/2013 - New Product added