[WTS/WTT] BlackArrow Breakout Board Cases/Mounts - page 2.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: philipma1957 on June 16, 2014, 07:10:26 PM

Quote from: mstrongbow on June 16, 2014, 12:13:39 PM

Quote from: philipma1957 on June 16, 2014, 07:30:15 AM

I would like one of these. The color yellow works for me. I do not need a fancy cut out. like minersource or talon. just a few round holes to allow air to circulate for cooling.

Would you be okay with the BlackArrow software logo (shown in first 2 posts)? Otherwise I will gladly slap a few holes in the lid but I will say this, I haven't noticed either of my boards getting hot at all. I have 2 yellows available, one is more neon and the other is closer to canary yellow. Also, I have a fluorescent red being delivered this week.

the blackarrow is fine easy for you is what works.

Buy them from us and Ill toss in our covers Tongue

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

I will be shipping out tomorrow! Finishing up the last few orders tonight. 1 of 3 filament orders arrived yesterday and I put my printer straight to work. The yellow looks amazing!

I also wanted to share this link as it is super cool seeing my work out there!
http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mstrongbow on June 16, 2014, 12:13:39 PM

Quote from: philipma1957 on June 16, 2014, 07:30:15 AM

I would like one of these. The color yellow works for me. I do not need a fancy cut out. like minersource or talon. just a few round holes to allow air to circulate for cooling.

Would you be okay with the BlackArrow software logo (shown in first 2 posts)? Otherwise I will gladly slap a few holes in the lid but I will say this, I haven't noticed either of my boards getting hot at all. I have 2 yellows available, one is more neon and the other is closer to canary yellow. Also, I have a fluorescent red being delivered this week.

the blackarrow is fine easy for you is what works.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Taking orders again!

Shipping out this BIG order today...(plus others)

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: philipma1957 on June 16, 2014, 07:30:15 AM

I would like one of these. The color yellow works for me. I do not need a fancy cut out. like minersource or talon. just a few round holes to allow air to circulate for cooling.

Would you be okay with the BlackArrow software logo (shown in first 2 posts)? Otherwise I will gladly slap a few holes in the lid but I will say this, I haven't noticed either of my boards getting hot at all. I have 2 yellows available, one is more neon and the other is closer to canary yellow. Also, I have a fluorescent red being delivered this week.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I would like one of these. The color yellow works for me. I do not need a fancy cut out. like minersource or talon. just a few round holes to allow air to circulate for cooling.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: ManeBjorn on June 15, 2014, 07:51:23 PM

Awesome!!!!!!
I cannot wait to get it.
It looks great.

You bet and thanks! Just what I like to hear Grin

It's all packaged up and ready to roll out tomorrow.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Awesome!!!!!!
I cannot wait to get it.
It looks great.

Quote from: mstrongbow on June 15, 2014, 07:47:49 PM

Fresh off the printer...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Fresh off the printer...

ManeBjorn

legendary

Activity: 1288

Merit: 1004

The guys at Minersource are great. I am very impressed with them.
Great swag.
The cases loo great.
Keep up the great work. Cool

Quote from: mstrongbow on June 13, 2014, 01:45:09 AM

Thanks MinerSource.net for the sweet swag along with my miners. I have already slapped a sticker on my printer, haha
Totally awesome!

R-Box (orb) mounts are coming soon! Should know more tomorrow Grin

What the revised case looks like currently...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Just wanted to post a quick update...

I am putting NEW orders on hold until Monday as I am pegged until next Wednesday fulfilling current orders. I am also waiting on a supply of filament so current orders may be completed. If there are any delays with your order, expect a PM from me but otherwise doing great!

The R-Box/Gridseed Orb mount design is near completion and should be ready for production this evening.

More later, it was a long/late night here and I am bushed.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Thanks MinerSource.net for the sweet swag along with my miners. I have already slapped a sticker on my printer, haha
Totally awesome!

R-Box (orb) mounts are coming soon! Should know more tomorrow Grin

What the revised case looks like currently...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: samsonn25 on June 10, 2014, 04:16:04 PM

Nice work.

Thanks very much. I enjoy making stuff.

2 orders have been placed and are being worked on and/or printed now. Thanks all!

More pics soon!

samsonn25

hero member

Activity: 882

Merit: 1003

Nice work.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: helipotte on June 10, 2014, 03:58:03 PM

Could you make them for the Black arrow control boards? These:

http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html

Yes. I do not own one of those so I would need dimensions (L x W x H) in Millimeters preferably. Although it would be much faster with a unit in hand, I do not require nor need a unit on hand to design and produce a case.

I have also been working on a case for the DualPSU adapters...
http://www.poweredrisers.com/dual-power-supply-adapter-similar-to-add2psu/

and eventually for this one...
http://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U

helipotte

hero member

Activity: 650

Merit: 500

Pick and place? I need more coffee.

Could you make them for the Black arrow control boards? These:

http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: mstrongbow on June 10, 2014, 02:55:52 PM

Now taking orders...

Customizable lids at little to NO extra charge!

Custom lid for MinerSource.net order!
(first print before changes-enlarged logo and modified the lid dimensions a tad after this print)

More pics soon! (unmounted/unpopulated cases)

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Now taking orders...

Customizable lids at little to NO extra charge!

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: ManeBjorn on June 09, 2014, 08:38:31 PM

Are the prices for the units including the lid?
I am going to get one when you are ready.

Quote from: mstrongbow on June 09, 2014, 07:40:20 PM

Quote from: ManeBjorn on June 09, 2014, 06:25:32 PM

That is a kick ass setup of 3D printers. So cool.

So what colors do you print in?

JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.

Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.

Here are pics of the colors I have currently. Black is on order and should be here within a couple days.
I normally stock red filament but just ran out last week.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Fresh pics of the cover/lid installed! A couple minor changes to the lid and it will be ready.

Also, I am updating the mount/base for faster printing, more versatile mounting options and a more compact unit. Stay tuned for a sneak peak of the new model

More pics soon!

*EDIT---REVISED POST WITH NEW PICS

Topic: [WTS/WTT] BlackArrow Breakout Board Cases/Mounts - page 2. (Read 5383 times)