Topic: [WTS/WTT] BlackArrow Breakout Board Cases/Mounts - page 3. (Read 5389 times)
Very nice!
Are the prices for the units including the lid?
I am going to get one when you are ready.
I am going to get one when you are ready.
Yes, both lid and base/mount included in the above listed prices.
Are the prices for the units including the lid?
I am going to get one when you are ready.
JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.
Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.
I am going to get one when you are ready.
That is a kick ass setup of 3D printers. So cool.
So what colors do you print in?
So what colors do you print in?
JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.
Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.
That is a kick ass setup of 3D printers. So cool.
So what colors do you print in?
So what colors do you print in?
JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.
Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.
That is a kick ass setup of 3D printers. So cool.
So what colors do you print in?
Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!
I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.
So what colors do you print in?
Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny
Danny
Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!
Very nice, what model 3d printer do you own?
I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.
Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny
Danny
Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!
Very nice, what model 3d printer do you own?
I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.
Very nice, what model 3d printer do you own?
Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny
Danny
very nice work - could we see a picture of the entire rig?
Sure thing mate...
very nice work - could we see a picture of the entire rig?
Preview of the cover (just finished modeling)
I have yet to clean up my cables but here are the first pics.
I have yet to clean up my cables but here are the first pics.
Fresh off the printer!
3D Printed BlackArrow Breakout Board Cases/Mounts for the BlackArrow Software ATX to DC Breakout boards
Found here http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
and here http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter
also offered in a deal with 6+ R-Box orders here https://bitcointalksearch.org/topic/asicpuppynet-terminus-moonlander-2-2pacs-in-stock-btcltcethbch-612390
These breakout boards are great for powering the latest Rockminer R-Box units as other mining hardware as well.
Feaures:
Protection from shorts/grounding
Multiple mounting positions
Many Colors available
No hardware required for installing your BlackArrow Software breakout board, it snaps securely in place.
$9 each plus shipping
or 2 for $16 plus shipping
or 3 for $23 plus shipping
BTC, LTC, DRK, Dogecoin, PayPal, MoneyPak payments accepted.
ALL trades considered.
BTC Payment Address
1NcoVoBrtnQTdyZvxYKXbCrL6MkKtgk842
LTC Payment Address
LQo9Ue64uDPUA7X8Hf47Lcxv6uuMy3hjqz
DRK Payment Address
Xan1hYGmXt93fX3VqrhE981mzEs5Wm2xQD
Dogecoin Payment Address
DCEnZBdDY21b7Cn45rEuxKGEi1Sw1gNspy
Please PM me for custom orders and when sending payment etc.
These should fit in a small padded envelope, more on that soon.
***NOTE***DO NOT PLUG MORE THAN ONE (1) PSU INTO THESE BREAKOUT BOARDS.
Bad things happen! (to the secondary psu)
EDIT--NOW READY FOR PRODUCTION!
3D Printed BlackArrow Breakout Board Cases/Mounts for the BlackArrow Software ATX to DC Breakout boards
Found here http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
and here http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter
also offered in a deal with 6+ R-Box orders here https://bitcointalksearch.org/topic/asicpuppynet-terminus-moonlander-2-2pacs-in-stock-btcltcethbch-612390
These breakout boards are great for powering the latest Rockminer R-Box units as other mining hardware as well.
Feaures:
Protection from shorts/grounding
Multiple mounting positions
Many Colors available
No hardware required for installing your BlackArrow Software breakout board, it snaps securely in place.
$9 each plus shipping
or 2 for $16 plus shipping
or 3 for $23 plus shipping
BTC, LTC, DRK, Dogecoin, PayPal, MoneyPak payments accepted.
ALL trades considered.
BTC Payment Address
1NcoVoBrtnQTdyZvxYKXbCrL6MkKtgk842
LTC Payment Address
LQo9Ue64uDPUA7X8Hf47Lcxv6uuMy3hjqz
DRK Payment Address
Xan1hYGmXt93fX3VqrhE981mzEs5Wm2xQD
Dogecoin Payment Address
DCEnZBdDY21b7Cn45rEuxKGEi1Sw1gNspy
Please PM me for custom orders and when sending payment etc.
These should fit in a small padded envelope, more on that soon.
***NOTE***DO NOT PLUG MORE THAN ONE (1) PSU INTO THESE BREAKOUT BOARDS.
Bad things happen! (to the secondary psu)
EDIT--NOW READY FOR PRODUCTION!
Jump to: