Topic: [www.easy2mine.com] 340$, the group buy of antminer s5(psu included) - page 72. (Read 123511 times)
April 03, 2014, 05:40:00 AM
I would just like to say that I am very happy that I saved money by directly sending btc to pcifli and I received my miner and have been hash at 1.05 TH now for 48 plus hours with no issues. Very trustworthy member and also great equipment!
April 03, 2014, 04:59:06 AM
I recieved my March 29th miner on Monday and have question. The machine is up and running but one of the 4 blades receives many more hardware errors than the others and the hashrate is 5% less. Addionally, the accepted shares run about 15% less than the other blades. Any thoughts? How can I troubleshoot this?
Try to replug the blade cable and change their slot on the controller, and set difficulty to 1024 on both miner web interface and pool setteings... that helped me out, cause i had the same problem....
April 03, 2014, 04:16:48 AM
Is this batch still open?
April 03, 2014, 12:08:12 AM
Just talkedwith my bank agian.. turns out they left 3 numbers off the bank account number for seller. Talking with bank tomorrow as wire xfer dept is closed to see what my options are. Expect payment soon . will update. should have just bought/used bitcoin. lesson learned.
How could you missed that since 21st March?
April 02, 2014, 11:32:10 PM
I recieved my March 29th miner on Monday and have question. The machine is up and running but one of the 4 blades receives many more hardware errors than the others and the hashrate is 5% less. Addionally, the accepted shares run about 15% less than the other blades. Any thoughts? How can I troubleshoot this?
miller has reported a similar question, i will ask the engineer for help, what is the real hash rate your miner perform now?right now it is around 985 GH/s
April 02, 2014, 10:00:36 PM
It maybe cheaper to buy a new machine and take out 4 blades.
I have asked the factory, the cost of one extra blade is 690$, the control board is very cheap, only 15$, maybe not as expensive as the shipment fee:)
I have asked the factory, the cost of one extra blade is 690$, the control board is very cheap, only 15$, maybe not as expensive as the shipment fee:)
Ya 690 is tooo much. I was thinking around 500. What if we do a group buy and get some QTY? Think if we order 100 blades we can get a betting price pcfli?
April 02, 2014, 08:41:16 PM
Just talkedwith my bank agian.. turns out they left 3 numbers off the bank account number for seller. Talking with bank tomorrow as wire xfer dept is closed to see what my options are. Expect payment soon . will update. should have just bought/used bitcoin. lesson learned.
April 02, 2014, 06:45:52 PM
I recieved my March 29th miner on Monday and have question. The machine is up and running but one of the 4 blades receives many more hardware errors than the others and the hashrate is 5% less. Addionally, the accepted shares run about 15% less than the other blades. Any thoughts? How can I troubleshoot this?
miller has reported a similar question, i will ask the engineer for help, what is the real hash rate your miner perform now? April 02, 2014, 06:23:18 PM
I recieved my March 29th miner on Monday and have question. The machine is up and running but one of the 4 blades receives many more hardware errors than the others and the hashrate is 5% less. Addionally, the accepted shares run about 15% less than the other blades. Any thoughts? How can I troubleshoot this?
April 02, 2014, 06:10:08 PM
Do these miners have english language interface yet? and whats the btc price?
also how much warranty on the hardware?
also how much warranty on the hardware?
April 02, 2014, 05:59:56 PM
I am also wondering the same thing. If anyone has instructions on how to do this I would be very interested and thankful.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
So is the March 29th order the 4 or the 5 blade? I am not going to be around for a while to check.
[/quote]
only the batch before march 15 have 5 blade inside
April 02, 2014, 05:28:36 PM
I am also wondering the same thing. If anyone has instructions on how to do this I would be very interested and thankful.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
[/quote]
So is the March 29th order the 4 or the 5 blade? I am not going to be around for a while to check.
April 02, 2014, 05:01:52 PM
Do these miners have english language interface yet? and whats the btc price?
also how much warranty on the hardware?
also how much warranty on the hardware?
April 02, 2014, 04:01:19 PM
It maybe cheaper to buy a new machine and take out 4 blades.
I have asked the factory, the cost of one extra blade is 690$, the control board is very cheap, only 15$, maybe not as expensive as the shipment fee:)
Any update on extra blade prices? And price on the control board?
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
I have asked the factory, the cost of one extra blade is 690$, the control board is very cheap, only 15$, maybe not as expensive as the shipment fee:)
April 02, 2014, 02:57:01 PM
Any update on extra blade prices? And price on the control board?
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
I have asked the factory, the cost of one extra blade is 690$, the control board is very cheap, only 15$, maybe not as expensive as the shipment fee:)
April 02, 2014, 02:05:14 PM
Any update on extra blade prices? And price on the control board?
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
Also any chance on shipping before the 5th, or is that set in stone?
Thanks for the good work so far!
April 02, 2014, 01:30:21 PM
I would like to say thank you to pcfli for our lengthy e-mail conversation today and for sorting out my business invoice requirements. Thanks again, pcfli.
Also for everyone who order by SWIFT wire transfer: I sent transfer on Monday, Wednesday it was already there with pcfli.
Now, payment has been confirmed and invoice have been prepared properly, I can't wait to receive my miner:)
Also for everyone who order by SWIFT wire transfer: I sent transfer on Monday, Wednesday it was already there with pcfli.
Now, payment has been confirmed and invoice have been prepared properly, I can't wait to receive my miner:)
April 02, 2014, 12:58:19 PM
I am also wondering the same thing. If anyone has instructions on how to do this I would be very interested and thankful.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
[/quote]Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
only the version with 5 blade has the possibility to over-clock and perform 1.1-1.2T hash rate, i am testing the img file these days and will let you know the result, but the engineer who develop the over-clock img file ask 200$ for this and you need register first to use the img file
April 02, 2014, 12:45:43 PM
I am also wondering the same thing. If anyone has instructions on how to do this I would be very interested and thankful.
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
[/quote]
Anyone manage to overclock these safely? I have extra PSUs around to balance the power draw.
[/quote]
April 02, 2014, 12:21:06 PM
This miner is very hot. Is that normal. I can barely stand behind its exhaust fume for more than 1 minute because of the hot air. It is HOT (as in first degree burn) to the touch of the case.
You may need better room airflow then.
All of my ~25 or so from all the batches are only moderately warm to the touch, and can be picked up and moved right after turning them off. Temps are not reported as higher than 68 or so, even the 5 blade OC versions. Ambient temp is between 71-80f.
Jump to: