[XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS - page 224.

5000Bitcoins

full member

Activity: 182

Merit: 100

Quote from: Wulfcastle on October 12, 2014, 07:41:36 AM

Quote from: matrix961 on October 12, 2014, 07:33:34 AM

My linux node is running well. I did notice it tries to forge just about every new block tho. The fork cleanup is working well since they get cleaned up with each sync.

The windows install works great. One click install and you're off running. Great job devs.

I also got my withdraw from bter so all good there.

I think one of our main problems right now is that BTER hold ~65% of the total Crypti supply. We need to get them to lift the 1% Withdrawal fee so that more people are inclined to withdraw their XCR from BTER and into their wallets.

There are 2 problems with this :

1. With the current 1% withdrawal fee, BTER will essentially get 1% of the total Crypti supply as virtually the whole IPO was done through BTER. That is unusually high for any major exchange.

2. If BTER is hacked (like it was a couple of months ago with the whole NXT situation), and the hacker compromises the Crypti funds, then we will be forced into the position that both NXT & VeriCoin faced when a large portion of their supply was stolen from an exchange, and no one really wants that at all.

Agreed the 1% withdrawal fee needs to go. Lin is a reasonable man & values the BTER users highly so there is possibility of renegotiating to increase arbitrage.
XCR also suffered from the NXT hack (the launch was due to the same day the NXT drama, so Lin did ruin the launch a bit, and as a result of NXT hack, the price dropped that same day too from people believing BTC was gone too.) so I think that XCR is due for compensation regardless, because I feel Lin has wrongdoed XCR.

I know he switched up security now though and about the hacking possibility - the ceiling of a withdrawal is 1 million now so wouldn't be considerably damage but still the fee needs to be lifted. Still too much if centralized around BTER if it would be out of business tomorrow.

matrix961

full member

Activity: 150

Merit: 100

Quote from: Litoshi on October 12, 2014, 07:36:28 AM

Because of the TEMPORARY random algo that replaces the Proof of TIme Algo, you will see almost every block show up on your forging screen as a forge. It is only a possible forge. Every node online gets this possible forge, then one is chosen at random for the actual forge.

You can also see this in the blockchain tab. Your wallet number will show as the generator for the top block, then be replaced by the lucky wallet.

Again, this is only a temporary measure until the PoT algo is bug free

Thank you for the clarification. I was wondering about that.

Wulfcastle

hero member

Activity: 546

Merit: 500

Quote from: Litoshi on October 12, 2014, 07:36:28 AM

Quote from: 5000Bitcoins on October 12, 2014, 03:52:06 AM

I am now forging.

Took me 1 minute to set up. Ridicuously easy, why hasn't this become 100x more popular than mining stuff?

I spend nothing, I do nothing yet I earn and contribute. Will let you in how goes in terms of return on investment after I let it run for a while. Very smooth sailing.

Because of the TEMPORARY random algo that replaces the Proof of TIme Algo, you will see almost every block show up on your forging screen as a forge. It is only a possible forge. Every node online gets this possible forge, then one is chosen at random for the actual forge.

You can also see this in the blockchain tab. Your wallet number will show as the generator for the top block, then be replaced by the lucky wallet.

Again, this is only a temporary measure until the PoT algo is bug free

Litoshi, as far as you know, will the upciming fix for the PoT algo (not the current temporary solution), retain the consistent block times that the current solution has brought about?

5000Bitcoins

full member

Activity: 182

Merit: 100

Quote from: ?? on ??

Quote from: starik69 on October 12, 2014, 06:43:03 AM

I confirm Linux client cannot get sync Cry

What a shame Roll Eyes

+1
You guys do not want to listen to me, you have not solved the problem with memory
5000 Bitcoins, Litoshi for you all is well. When in fact the problem is not solved
If the memory problem is not resolved, the project can be considered a failure

All is well. All you do is bash Crypti and hail Node in all your posts.

I obviously don't share the same values as you do (bashing other coins thinking my coin is gonna become better because of that)
I rather contribute to what I believe to be superior technology to help it grow instead of trolling other threads.

I think that's why people don't listen to you

Wulfcastle

hero member

Activity: 546

Merit: 500

Quote from: matrix961 on October 12, 2014, 07:33:34 AM

My linux node is running well. I did notice it tries to forge just about every new block tho. The fork cleanup is working well since they get cleaned up with each sync.

The windows install works great. One click install and you're off running. Great job devs.

I also got my withdraw from bter so all good there.

I think one of our main problems right now is that BTER hold ~65% of the total Crypti supply. We need to get them to lift the 1% Withdrawal fee so that more people are inclined to withdraw their XCR from BTER and into their wallets.

There are 2 problems with this :

1. With the current 1% withdrawal fee, BTER will essentially get 1% of the total Crypti supply as virtually the whole IPO was done through BTER. That is unusually high for any major exchange.

2. If BTER is hacked (like it was a couple of months ago with the whole NXT situation), and the hacker compromises the Crypti funds, then we will be forced into the position that both NXT & VeriCoin faced when a large portion of their supply was stolen from an exchange, and no one really wants that at all.

Litoshi

hero member

Activity: 700

Merit: 500

Member of the Crypti Foundation Board of Directors

Quote from: 5000Bitcoins on October 12, 2014, 03:52:06 AM

I am now forging.

Took me 1 minute to set up. Ridicuously easy, why hasn't this become 100x more popular than mining stuff?

I spend nothing, I do nothing yet I earn and contribute. Will let you in how goes in terms of return on investment after I let it run for a while. Very smooth sailing.

Because of the TEMPORARY random algo that replaces the Proof of TIme Algo, you will see almost every block show up on your forging screen as a forge. It is only a possible forge. Every node online gets this possible forge, then one is chosen at random for the actual forge.

You can also see this in the blockchain tab. Your wallet number will show as the generator for the top block, then be replaced by the lucky wallet.

Again, this is only a temporary measure until the PoT algo is bug free

Wulfcastle

hero member

Activity: 546

Merit: 500

Quote from: matrix961 on October 12, 2014, 07:33:34 AM

My linux node is running well. I did notice it tries to forge just about every new block tho. The fork cleanup is working well since they get cleaned up with each sync.

The windows install works great. One click install and you're off running. Great job devs.

I also got my withdraw from bter so all good there.

Same here, I see to forge almost every new block before it gets orphaned. I'll leave my node running for 24 hours to see if any of my forged blocks are accepted onto the main-chain or if all will be orphaned.

matrix961

full member

Activity: 150

Merit: 100

My linux node is running well. I did notice it tries to forge just about every new block tho. The fork cleanup is working well since they get cleaned up with each sync.

The windows install works great. One click install and you're off running. Great job devs.

I also got my withdraw from bter so all good there.

Wulfcastle

hero member

Activity: 546

Merit: 500

Quote from: ?? on ??

Quote from: starik69 on October 12, 2014, 06:43:03 AM

I confirm Linux client cannot get sync Cry

What a shame Roll Eyes

+1
You guys do not want to listen to me, you have not solved the problem with memory
5000 Bitcoins, Litoshi for you all is well. When in fact the problem is not solved

So you quote the biggest troll here to make a point?

On Windows, the Crypti Wallet is using ~700MB of RAM. The only reason it is using so much is because the application itself is running through node-webkit, which is a memory hog itself.

Litoshi

hero member

Activity: 700

Merit: 500

Member of the Crypti Foundation Board of Directors

Quote from: ?? on ??

Quote from: Litoshi on October 11, 2014, 06:51:30 PM

Quote from: ?? on ??

hi, someone make video how to forge ?

Do this exactly:

1) have 1000 or more XCR in your wallet/node.

2) open the windows Crypti wallet/node

3) Now you see the account log in. In the upper right corner is a box "forging panel". Click on that and it takes you to the forging tab.

4) enter your passphrase for the wallet/node having 1000 or more XCR Use CTRL-V to paste your passphrase if necessary. Copy/PASTE may not work for everyboby.

5) If successful, the log in box will indicate forging has started. You will also see FORGING ENABLED in the forging tab

6) NOW, you can log in to the account to see your wallet/node balance and the blockchain.

7) you log out of forging by using your passphrase in the forging panel box. If you do not log out manually in the forging panel, forging will restart automatically when you restart the Cryptiwallet next time

You can save your passphrase in the config.json file under " password". Edit it in Notepad.

dear litoshi,please make chinese version for me and friend.

確切地做到這一點：

1）在您的錢包，節點有 1000 個或更多的 XCR。

2）打開 windows 節點 Crypti 錢包

3）現在你看到登錄的帳戶。在右上角是一盒"鍛造小組"。按一下它，它將您帶到鍛造選項卡。

4）輸入您的錢包/節點有 1000年或更多 XCR 使用 CTRL-V 來粘貼您的密碼，如果必要的密碼短語。複製/粘貼為大家可能不工作。

5）如果成功，框中的該日誌將指出鍛造已經開始。您還將看到鍛造啟用在鍛造選項卡

6）現在，您可以登錄到該帳戶，看看你的錢包/節點平衡和 blockchain。

7）你登出鍛件鍛造面板框中使用您的密碼。如果你做不登出手動鍛造面板中，鍛造將自動重新開機時重新開機 Cryptiwallet 時下, 一次

在"密碼"下的 config.json 檔，您可以保存您的密碼。在記事本中編輯它。

Made with Bing Translator.

5000Bitcoins

full member

Activity: 182

Merit: 100

Quote from: crypti on October 12, 2014, 06:40:20 AM

Hey,

I'm still here, a lot of works make me busy.

We already contacted exchanges.

Hi Crypti.

Contact to get listed on Bittrex too, more exchanges more arbitrage more forging fees.

starik69

legendary

Activity: 1367

Merit: 1000

I confirm Linux client cannot get sync Cry

What a shame Roll Eyes

crypti

hero member

Activity: 511

Merit: 500

Boris, Crypti Lead Developer, Lisk Advisor

Hey,

I'm still here, a lot of works make me busy.

We already contacted exchanges.

5000Bitcoins

full member

Activity: 182

Merit: 100

Devs need to

Update original post with new information -/ releases. (the current algo, new wallet, timeline)
Update www.twitter.com/crypticoin with info, people follow it for one reason and that is for latest news.
Market the Windows installer a little bit. A video just setting it up is sufficient to show just how easy it is to set up.
Editing all news posts linking to blog.crypti.me for releases, it is OK to link to it but I think you should write a part of the message / the whole message in post here because of people skimming through side to side might miss it.

Also did you contact Cryptsy/Poloniex about your new version?

5000Bitcoins

full member

Activity: 182

Merit: 100

Quote from: Wulfcastle on October 12, 2014, 03:00:28 AM

Quote from: 5000Bitcoins on October 12, 2014, 02:57:13 AM

Quote from: Wulfcastle on October 12, 2014, 02:50:45 AM

Quote from: fakeshadow on October 11, 2014, 11:23:25 PM

tried 0.1.7 on both systems.
linux version works fine,however on windows i keep forking and all forged blocks become orphan(the fork recovery system works great though)

Same thing happening here, I managed to forge 5 blocks, but all became orphans. @Devs, is this normal?

What does orphans mean?

Orphan blocks, are basically valid blocks which are not part of the main-chain. Normally it can occur when two forgers produce blocks at similar times, this is most likely the reason for all the orphan blocks we are seeing. All of my orphaned blocks have been produced within 10-15 seconds of the forged block that has been accepted onto the main-chain.

Hmm I see, but which forgers gets it is determined by who's forged longest I think? Or have to have it up for an amount of time before network counts on you?

Could it be network rejects your block in favor for the other guy because he's forged longer when you produce blocks at same time?

Need to find what applies to current algo, can't remember it now

5000Bitcoins

full member

Activity: 182

Merit: 100

I am now forging.

Took me 1 minute to set up. Ridicuously easy, why hasn't this become 100x more popular than mining stuff?

I spend nothing, I do nothing yet I earn and contribute. Will let you in how goes in terms of return on investment after I let it run for a while. Very smooth sailing.

5000Bitcoins

full member

Activity: 182

Merit: 100

UPDATE: Spoke to CS as I mentioned about sending XCR on BTER > wallet, it works now after communication with BTER and "author" as the chinese say aka dev

They are processing withdrawals now - it was something on their end fixed in 30 minutes.

Bter_ ball - bit child Trading Platform (Manwei Technology) 2014-10-12 16:29:28
Your withdrawal to the account now? The speed of sending COINS soon
I 2014-10-12 14:39:10
Yes! Thank you thank you
Bter_ ball - bit child Trading Platform (Manwei Technology) 2014-10-12 16:32:02
You're welcome, Bter wish you a happy mood.

I can confirm have successfully received my coins from BTER meant for forging.

Good job dev, gonna try this now. Grin

p.s

Bter_ ball - bit child Trading Platform (Manwei Technology) 2014-10-12 15:57:32
Hello, customer service Bter_ balls for you.

Thank you mister Balls of Bit Child Exchange. Chinese ppl... Grin

Wulfcastle

hero member

Activity: 546

Merit: 500

Quote from: 5000Bitcoins on October 12, 2014, 02:57:13 AM

Quote from: Wulfcastle on October 12, 2014, 02:50:45 AM

Quote from: fakeshadow on October 11, 2014, 11:23:25 PM

tried 0.1.7 on both systems.
linux version works fine,however on windows i keep forking and all forged blocks become orphan(the fork recovery system works great though)

Same thing happening here, I managed to forge 5 blocks, but all became orphans. @Devs, is this normal?

What does orphans mean?

Orphan blocks, are basically valid blocks which are not part of the main-chain. Normally it can occur when two forgers produce blocks at similar times, this is most likely the reason for all the orphan blocks we are seeing. All of my orphaned blocks have been produced within 10-15 seconds of the forged block that has been accepted onto the main-chain.

5000Bitcoins

full member

Activity: 182

Merit: 100

Quote from: Wulfcastle on October 12, 2014, 02:50:45 AM

Quote from: fakeshadow on October 11, 2014, 11:23:25 PM

tried 0.1.7 on both systems.
linux version works fine,however on windows i keep forking and all forged blocks become orphan(the fork recovery system works great though)

Same thing happening here, I managed to forge 5 blocks, but all became orphans. @Devs, is this normal?

What does orphans mean?

5000Bitcoins

full member

Activity: 182

Merit: 100

I am currently speaking with Customer Support on BTER regarding XCR withdrawals that I pointed out earlier.

They disabled withdrawals for now, I think it is something on their end which will be resolved soon. Will update with progress so we can start forging soon.

Topic: [XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS - page 224. (Read 804701 times)