In the meantime, I'm a native French speaker with a very good command of Italian too so if I can ever help for some translations just tell me!
Topic: [XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS - page 68. (Read 804695 times)
June 25, 2015, 04:12:33 AM
Hello community! I just went into Crypti and applied as a delegate, but I'd like to know what a delegate is expected to be (or to do) exactly?
In the meantime, I'm a native French speaker with a very good command of Italian too so if I can ever help for some translations just tell me!
In the meantime, I'm a native French speaker with a very good command of Italian too so if I can ever help for some translations just tell me!
June 25, 2015, 12:23:28 AM
Very strange, my uptime went a bit up in the last days. So I encountered the exact contrary phenomenon.
Your uptime SHOULD go up "a bit" over a period of a few days, right? And asymptotically approach 99.99%.
My question is, how do you know if you've missed a forge you were supposed to do in a cycle of 101 blocks?
Yes. You can check in the forging center if you forged the block or missed it. The interval of your forged blocks should always be between 0 and 101 (1 and 100).
I've checked my data for the last eight hours and looks like I'm hitting 100%. However, I think the actual "good" interval is not between 1 and 100 but instead between 1 and 200. You could theoretically be the first forger in cycle A and the last forger in cycle B and there could be 200 blocks between those two turns. A long stretch like this could also account for your "uptime" going down slightly during a two cycle period. I will need to re-evaluate my list of 12 printed above tomorrow when there is a longer period of time to examine.
You are right, sorry. Yesterday it was pretty late already.
June 24, 2015, 09:15:25 PM
Very strange, my uptime went a bit up in the last days. So I encountered the exact contrary phenomenon.
Your uptime SHOULD go up "a bit" over a period of a few days, right? And asymptotically approach 99.99%.
My question is, how do you know if you've missed a forge you were supposed to do in a cycle of 101 blocks?
Yes. You can check in the forging center if you forged the block or missed it. The interval of your forged blocks should always be between 0 and 101 (1 and 100).
I've checked my data for the last eight hours and looks like I'm hitting 100%. However, I think the actual "good" interval is not between 1 and 100 but instead between 1 and 200. You could theoretically be the first forger in cycle A and the last forger in cycle B and there could be 200 blocks between those two turns. A long stretch like this could also account for your "uptime" going down slightly during a two cycle period. I will need to re-evaluate my list of 12 printed above tomorrow when there is a longer period of time to examine.
June 24, 2015, 04:15:52 PM
Very strange, my uptime went a bit up in the last days. So I encountered the exact contrary phenomenon.
Your uptime SHOULD go up "a bit" over a period of a few days, right? And asymptotically approach 99.99%.
My question is, how do you know if you've missed a forge you were supposed to do in a cycle of 101 blocks?
Yes. You can check in the forging center if you forged the block or missed it. The interval of your forged blocks should always be between 0 and 101 (1 and 100).
June 24, 2015, 04:11:58 PM
Very strange, my uptime went a bit up in the last days. So I encountered the exact contrary phenomenon.
Your uptime SHOULD go up "a bit" over a period of a few days, right? And asymptotically approach 99.99%.
My question is, how do you know if you've missed a forge you were supposed to do in a cycle of 101 blocks?
June 24, 2015, 04:09:20 PM
On my 0.2.0 delegate node when I click on 'Stop Forging' button it asks for a password, entering my delegate passphrase there gives me 'Access denied' error ? I'm not able to stop my delegate and update it to 0.3.0 version.
Please help.
Please help.
Go to your server, stop the 0.2.0a program / process, copy the blockchain over to the 0.3.0 folder, go to the 0.3.0 folder, mod the config.json text file with your forging account password, and start the 0.3.0 program/process.
Don't worry about gracefully doing a controlled transfer between the two versions. Just kill the old job and start the new job.
June 24, 2015, 04:08:32 PM
On my 0.2.0 delegate node when I click on 'Stop Forging' button it asks for a password, entering my delegate passphrase there gives me 'Access denied' error ? I'm not able to stop my delegate and update it to 0.3.0 version.
Please help.
Please help.
Just close the client, install v0.3.0 and start forging there.
For what it's worth, it looks like there are at least 12 Top Delegates in the "101 Club" that are not currently forging:
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
For what it is worth, I noticed that my delegate, hosted on Vultr, is only hitting about 75% since the 030 update. My uptime has gone down slowly, as I hit an average of 3 forgings per hour and miss one.
Very strange, my uptime went a bit up in the last days. So I encountered the exact contrary phenomenon.
June 24, 2015, 03:57:02 PM
On my 0.2.0 delegate node when I click on 'Stop Forging' button it asks for a password, entering my delegate passphrase there gives me 'Access denied' error ? I'm not able to stop my delegate and update it to 0.3.0 version.
Please help.
Please help.
June 24, 2015, 03:45:07 PM
New POT fail? 
Never saw it
Death Note fan?
Again false assumptions? Never saw it
June 24, 2015, 02:15:38 PM
For what it is worth, I noticed that my delegate, hosted on Vultr, is only hitting about 75% since the 030 update. My uptime has gone down slowly, as I hit an average of 3 forgings per hour and miss one.
That's interesting, because the list I posted above is based on servers that I see have their uptime going down slowly too. Maybe they ARE online forging but are occasionally missing their turn too. I'll let it percolate for a day or so and recheck.
In any event, it looks like it's worth verifying 0.3.0 isn't causing an upswing in missed forgings because of tighter timings.
June 24, 2015, 01:46:55 PM
For what it's worth, it looks like there are at least 12 Top Delegates in the "101 Club" that are not currently forging:
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
For what it is worth, I noticed that my delegate, hosted on Vultr, is only hitting about 75% since the 030 update. My uptime has gone down slowly, as I hit an average of 3 forgings per hour and miss one.
June 24, 2015, 12:57:16 PM
For what it's worth, it looks like there are at least 12 Top Delegates in the "101 Club" that are not currently forging:
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
UPTIME DELEGATE
72.78% Altocumulus
72.78% Altostratus
84.69% Stratocumulus
84.47% Stratus
56.18% foundation10
56.60% foundation9
85.38% MatthewDC_D1
85.07% MatthewDC_D8
12.79% stasDelegate1
12.63% stasDelegate4
75.38% landgraf.paul
53.15% Wulfcastle
This list may be longer, but if so, it's among members whose total uptime is over 85%.
June 24, 2015, 07:40:58 AM
Hello, just a little complaint about the client, the Forging indicator that is also a button is not a clear way to make a button to start forging, it looks like just a decorative indicator, not an actual button, it took me 2 days to realize i wasnt actually forging and that was in fact a button. Not exactly saying it is bad, just not very clear to simple guys like me
This is the button i'm talking about:
This is the button i'm talking about:
Hey Jari, thanks for your feedback. We encountered the problem ourselves. Therefore we will change it to a switch. We changed the design, however Vera still need to code it. It will come in a later version in the v0.3.0er branch.
http://i.cubeupload.com/bjlkkR.png
As an advice from one delegate to another, you should set your passphrase in the config.json. If you client restarts, you will still forge this way. But to do this you should transfer nearly all XCR out of your delegate account for security reasons.
Yes, it is configured that way, that's why i didnt check for a button, i expected it to automatically forge
New design for it is looking very good
Strange, it should automatically start forge. Please try it again at a later version. Glad you like the switch, this will make things more clear.
June 24, 2015, 07:06:41 AM
Hello, just a little complaint about the client, the Forging indicator that is also a button is not a clear way to make a button to start forging, it looks like just a decorative indicator, not an actual button, it took me 2 days to realize i wasnt actually forging and that was in fact a button. Not exactly saying it is bad, just not very clear to simple guys like me
This is the button i'm talking about:
This is the button i'm talking about:
Hey Jari, thanks for your feedback. We encountered the problem ourselves. Therefore we will change it to a switch. We changed the design, however Vera still need to code it. It will come in a later version in the v0.3.0er branch.
http://i.cubeupload.com/bjlkkR.png
As an advice from one delegate to another, you should set your passphrase in the config.json. If you client restarts, you will still forge this way. But to do this you should transfer nearly all XCR out of your delegate account for security reasons.
Yes, it is configured that way, that's why i didnt check for a button, i expected it to automatically forge
New design for it is looking very good
June 24, 2015, 07:00:33 AM
Hello, just a little complaint about the client, the Forging indicator that is also a button is not a clear way to make a button to start forging, it looks like just a decorative indicator, not an actual button, it took me 2 days to realize i wasnt actually forging and that was in fact a button. Not exactly saying it is bad, just not very clear to simple guys like me
This is the button i'm talking about:
This is the button i'm talking about:
Hey Jari, thanks for your feedback. We encountered the problem ourselves. Therefore we will change it to a switch. We changed the design, however Vera still need to code it. It will come in a later version in the v0.3.0er branch.
As an advice from one delegate to another, you should set your passphrase in the config.json. If you client restarts, you will still forge this way. But to do this you should transfer nearly all XCR out of your delegate account for security reasons.
June 24, 2015, 06:53:54 AM
Cryptichain.me Online again
Great news, Olivier just fixed the blockchain explorer and therefore cryptichain.me is now online again. Have fun using it, I see many username registrations!
Great news, Olivier just fixed the blockchain explorer and therefore cryptichain.me is now online again. Have fun using it, I see many username registrations!
Awesome, nice to see it working again!
June 24, 2015, 06:49:49 AM
Hello, just a little complaint about the client, the Forging indicator that is also a button is not a clear way to make a button to start forging, it looks like just a decorative indicator, not an actual button, it took me 2 days to realize i wasnt actually forging and that was in fact a button. Not exactly saying it is bad, just not very clear to simple guys like me
This is the button i'm talking about:
This is the button i'm talking about:
June 24, 2015, 06:24:00 AM
Cryptichain.me Online again
Great news, Olivier just fixed the blockchain explorer and therefore cryptichain.me is now online again. Have fun using it, I see many username registrations!
Great news, Olivier just fixed the blockchain explorer and therefore cryptichain.me is now online again. Have fun using it, I see many username registrations!
June 24, 2015, 05:53:06 AM
You be the judge of if this can be called compatable or not.
Going fork is incompatible BTW, yesterday i successfully upgraded my delegate so don't vote for it
Oh, missed the moment i became L
Death Note fan?
June 24, 2015, 05:47:30 AM
You be the judge of if this can be called compatable or not.
Going fork is incompatible BTW, yesterday i successfully upgraded my delegate so don't vote for it
Oh, missed the moment i became L
Jump to: