Topic: [XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos - page 1323. (Read 1484248 times)
June 09, 2014, 07:06:04 AM
all work fine -find problem in youself
June 09, 2014, 07:05:50 AM
Good job Dan and the whole XC team i know we have a brilliant future ahead
Who is the XC team? How many are in the XC team and what are their skills?
Thanks
Hello, I'm part of the team and I act as the community manager.
June 09, 2014, 07:05:31 AM
"repairwallet" help
Many thanks friends!
Many thanks friends!
June 09, 2014, 07:04:39 AM
Good job Dan and the whole XC team i know we have a brilliant future ahead
Who is the XC team? How many are in the XC team and what are their skills?
Thanks
To be announced. Soon.
June 09, 2014, 06:58:20 AM
My coins dissapear from wallet 
:
What can I do to get them back?
how many connections do you have with network:What can I do to get them back?
and what version is your wallet?
or run "repairwallet" in the console.
June 09, 2014, 06:56:24 AM
Here my history:
have you backed up ur wallet.dat? If you have, dont worry
It looks like you coins were staking, then you upgraded wallet, and somethnig gone wrong with syncing. When ur new wallet tries to sync, you sdtaking coins do not show up in wallet, thus seemingly disappearing. I see your wallet is not fully synced, so something went wrong. If I were you, I would backup my old wallet dat, delete wallet folder, then delete my x11 apps folder, redownload new wallet, open it(to create the new appdata folder), close it, replace wallet, then open it again and let it fully sync
Be sure to use the X11.conf with new nodes added from OP
June 09, 2014, 06:53:49 AM
My coins dissapear from wallet :
What can I do to get them back?
how many connections do you have with network:What can I do to get them back?
and what version is your wallet?
June 09, 2014, 06:49:33 AM
Here my history:
June 09, 2014, 06:45:57 AM
My coins dissapear from wallet :
What can I do to get them back?
:What can I do to get them back?
June 09, 2014, 05:53:56 AM
So here is my config :
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
Quote
xmixer=1
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
Correct and very clear.
THANKS a lot ! so now I know I'm running the good config
@ATCSECURE, I know I ask it often, but can you please :
- make binary release for linux, even if it's rar file that we'll have to install manually
- make something in wallet for us to know if xnode is running ok
Thanks so much
Yes, if there is an indicator to show the xnode is running, that would be better
June 09, 2014, 05:48:58 AM
where do you find "deselect 'For stacking only" in the wallet? edit i found it .
June 09, 2014, 05:31:19 AM
Good job Dan and the whole XC team i know we have a brilliant future ahead
Who is the XC team? How many are in the XC team and what are their skills?
Thanks
June 09, 2014, 05:29:43 AM
Can i send XC to Mintpal using the sendfrommixer command ?
And what is the command i need to write ?
I have a adress labelled Mintpal in my wallet can i use it and how ?
sendfrommixer
June 09, 2014, 05:08:56 AM
So here is my config :
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
Quote
xmixer=1
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
Correct and very clear.
THANKS a lot ! so now I know I'm running the good config
@ATCSECURE, I know I ask it often, but can you please :
- make binary release for linux, even if it's rar file that we'll have to install manually
- make something in wallet for us to know if xnode is running ok
Thanks so much
June 09, 2014, 05:07:24 AM
So what is now the minimum XC i need to run an Xnode?
You need at least 550 XC to be running as an xnode for v1.38.
Cool thanks very much!! Will get mine up and running tonight, shame there's not much interest in the coin atm tho
June 09, 2014, 04:52:13 AM
So what is now the minimum XC i need to run an Xnode?
You need at least 550 XC to be running as an xnode for v1.38.
June 09, 2014, 04:48:58 AM
So what is now the minimum XC i need to run an Xnode?
June 09, 2014, 04:27:55 AM
So here is my config :
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
Quote
xmixer=1
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
Correct and very clear.
June 09, 2014, 04:20:53 AM
cool man..i have seen 7 transactions come through my xnode : > made 0.08 overnight off xnode :> .. u rock ATC!!!!
Mind sharing a screenshot of the transaction list?
I too can confirm its working though I am not comfortable posting shots of it. If someone wants to that is up to them I guess. I too had 7 transactions.
How do I know its working, I followed the instructions and moved 15 to a new wallet, added reservebalance=15, and then started the xnode-mainnet, do I just wait it out?
Yes its pretty much waiting for someone to use the mixer believe.
cool man..i have seen 7 transactions come through my xnode : > made 0.08 overnight off xnode :> .. u rock ATC!!!!
Mind sharing a screenshot of the transaction list?
I too can confirm its working though I am not comfortable posting shots of it. If someone wants to that is up to them I guess. I too had 7 transactions.
Can one of you both can post config, just to be sure ?
I pretty sure running it fine here but not sure in fact so ..
Thanks
Add these nodes:
east01.xcnode.xc-official.com
west01.xcnode.xc-official.com
west02.xcnode.xc-official.com
Then follow the rest here :
http://xc-official.com/XCPlatform/user_guides/Running-an_XNode.pdf
I am not sure what the set amount min is, but I put 499 into the wallet and it ran just fine. I got a few "payments" .
June 09, 2014, 04:20:40 AM
So here is my config :
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
xnode unders windows, release 1.38
Wallet with address label : MIXER
550 XC in the wallet minimum (the one named MIXER, if you have more than one address) to run the xnode (actually 555 XC my side)
running directly x11coin-qt.exe
with this X11Coin.conf
Quote
xmixer=1
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
listen=1
server=1
gen=0
reservebalance=10000
rpcuser=bitcoinrpc
rpcpassword=mypassword_provided_at_first_launch
addnode=east01.xcnode.xc-official.com
addnode=west01.xcnode.xc-official.com
addnode=west02.xcnode.xc-official.com
When launched I unlock wallet with passphrase and deselect 'For stacking only' to have full unlocked
Now I'm awaiting expecting some transaction to go thru.
Am I right ?
Thanks
Jump to: