XMR Monero Pool xmr.suprnova.cc MPOS Based PPLNS - page 3.

Sam123

hero member

Activity: 980

Merit: 502

Quote from: ocminer on February 28, 2017, 04:48:09 PM

Quote from: Sam123 on February 28, 2017, 02:42:18 PM

Quote from: ocminer on February 28, 2017, 02:57:57 AM

Happy Hippopotamus Week - 0 % fee on this pool until Friday !

Hi OCminer,

How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner. I already have an account on suprnova and mining Zclassic fine but I have problem mining monero.

In .bat I have

NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password

I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

You have to replace Weblogin.Worker and Password with your values of course

Of course I did replace Weblogin.Worker and Password with my own(I'm already mining Zclassic fine)
Do it need to add my XMR address also?
Thanks

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: Sam123 on February 28, 2017, 02:42:18 PM

Quote from: ocminer on February 28, 2017, 02:57:57 AM

Happy Hippopotamus Week - 0 % fee on this pool until Friday !

Hi OCminer,

How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner. I already have an account on suprnova and mining Zclassic fine but I have problem mining monero.

In .bat I have

NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password

I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

You have to replace Weblogin.Worker and Password with your values of course

Sam123

hero member

Activity: 980

Merit: 502

Quote from: ocminer on February 28, 2017, 02:57:57 AM

Happy Hippopotamus Week - 0 % fee on this pool until Friday !

Hi OCminer,

How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner. I already have an account on suprnova and mining Zclassic fine but I have problem mining monero.

In .bat I have

NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password

I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

ocminer

legendary

Activity: 2688

Merit: 1240

Happy Hippopotamus Week - 0 % fee on this pool until Friday !

Sam123

hero member

Activity: 980

Merit: 502

Quote from: kisk on February 26, 2017, 10:11:56 AM

Quote from: Sam123 on February 25, 2017, 11:27:33 PM

Hi,
How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner .
In .bat NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password
I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

The server response is sending ,"message":"missinglogin" ... did you create an account on suprnova? Then update your bat to "-zwal youraccountname.anyworkername -zpsw x"

Yes. I already have an account on suprnova. I'm mining another coin on suprnova.
Thanks

kisk

full member

Activity: 126

Merit: 100

Quote from: Sam123 on February 25, 2017, 11:27:33 PM

Hi,
How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner .
In .bat NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password
I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

The server response is sending ,"message":"missinglogin" ... did you create an account on suprnova? Then update your bat to "-zwal youraccountname.anyworkername -zpsw x"

Sam123

hero member

Activity: 980

Merit: 502

Hi,
How can I mine monero please on Windows GPU (RX480) using NsGpuCNMiner .
In .bat NsGpuCNMiner -o ssl://xmr.suprnova.cc:5221 -zwal Weblogin.Worker -zpsw Password
I'm getting Error

SSL/TLS encryption is enabled
SSL/TLS encryption is enabled
Stratum - Connected (SSL/TLS)
Stratum - Connected (SSL/TLS)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"missinglogin"}}
Stratum - reading socket failed 10038, disconnect
DevFee: Pool Diff 10000
Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attem

kisk

full member

Activity: 126

Merit: 100

Fine here. Seems to be something on your end.

Prelude

legendary

Activity: 1596

Merit: 1000

Decided to try the non US node instead of switching and so far so good. Issue seems to be with US node.

Prelude

legendary

Activity: 1596

Merit: 1000

It's still happening. At this point I've burned a whole lot of kilowatts on rejected shares and lost a bunch of revenue so I'm going to have to change pools.

That said, your pools are my favourite. If you figure out what is wrong with the pool eventually, let me know and I'll switch back over to suprnova.

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: ocminer on February 17, 2017, 05:52:39 PM

i've reloaded the US node, looks like it was a bit overloaded, should be fine now

Cool. I'll zero statistics across all rigs and keep an eye on them.

ocminer

legendary

Activity: 2688

Merit: 1240

i've reloaded the US node, looks like it was a bit overloaded, should be fine now

Prelude

legendary

Activity: 1596

Merit: 1000

Rejects are still happening:

Any ideas?

Prelude

legendary

Activity: 1596

Merit: 1000

Quote from: ocminer on February 15, 2017, 03:44:05 AM

Quote from: Prelude on February 14, 2017, 10:53:23 AM

Is something up with the pool? I'm getting a lot of rejects across all my rigs.

On which node ? All good from my side

US node. Seems fine today, but yesterday there were a few periods where there was nothing but rejects across all rigs. I just checked a rig that's on it's 6th day of uptime and all 7 GPUs are sitting at 1% rejects because of yesterday.

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: Prelude on February 14, 2017, 10:53:23 AM

Is something up with the pool? I'm getting a lot of rejects across all my rigs.

On which node ? All good from my side

Prelude

legendary

Activity: 1596

Merit: 1000

Is something up with the pool? I'm getting a lot of rejects across all my rigs.

zoggie

newbie

Activity: 25

Merit: 0

Quote from: ocminer on February 01, 2017, 04:22:39 AM

Quote from: zoggie on February 01, 2017, 02:26:39 AM

Quote from: ocminer on January 31, 2017, 08:48:39 PM

Quote from: zoggie on January 31, 2017, 11:39:23 AM

confirmed this morning by Poloniex that suprnova is broken.

quoted from Poloniex staff ...
"It seem that transaction was sent without a xmr payment id"

Till this is fixed can't mine at suprnova.

Sad considering this looked to be decently maintained but appears pool operator ocminer is too busy with pascal these days.

I'm mining on my own pool and I also withdraw to polo.

even if you send a payment without payment id to polo, just send them the TXID and the exact amount of your payment and they can still credit the amount to your account - since it's been transferred to their account...

There are three checks in the pool software that sending to polo's address is impossible without payment id, first when entering the address, the second when verifying the address and the last when sending to that address.. I doubt it was really sent without polo payment id.. IMHO those ring-ct's have problems sometimes since XMR updated / forked.

Chainradar shows NO payment ID (I PM'd you the details)
Poloniex said it was sent with NO payment ID and they are forwarding to another department to see if they will credit me or not. 48 hours later, no credit yet.

I believe you when you say there are checks in place. Previous payments went through without an issue. I was one of the first to beta test this but this last transaction failed. Having to waste all this time to chase it up, and still no funds, still waiting, something is still broken somewhere.

Non integrated payment ID's where IMHO a stupid idea to start with.

OK, message me your TXID again and I'll check that once more !

PM sent. Poloniex re-confirmed Payment ID missing. They have now credited my account but it has taken 3 days and 3 emails.

I have left my Payment ID field untouched and populated with my paymentID for you to look into as to where it failed to be sent.

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: zoggie on February 01, 2017, 02:26:39 AM

Quote from: ocminer on January 31, 2017, 08:48:39 PM

Quote from: zoggie on January 31, 2017, 11:39:23 AM

confirmed this morning by Poloniex that suprnova is broken.

quoted from Poloniex staff ...
"It seem that transaction was sent without a xmr payment id"

Till this is fixed can't mine at suprnova.

Sad considering this looked to be decently maintained but appears pool operator ocminer is too busy with pascal these days.

I'm mining on my own pool and I also withdraw to polo.

even if you send a payment without payment id to polo, just send them the TXID and the exact amount of your payment and they can still credit the amount to your account - since it's been transferred to their account...

There are three checks in the pool software that sending to polo's address is impossible without payment id, first when entering the address, the second when verifying the address and the last when sending to that address.. I doubt it was really sent without polo payment id.. IMHO those ring-ct's have problems sometimes since XMR updated / forked.

Chainradar shows NO payment ID (I PM'd you the details)
Poloniex said it was sent with NO payment ID and they are forwarding to another department to see if they will credit me or not. 48 hours later, no credit yet.

I believe you when you say there are checks in place. Previous payments went through without an issue. I was one of the first to beta test this but this last transaction failed. Having to waste all this time to chase it up, and still no funds, still waiting, something is still broken somewhere.

Non integrated payment ID's where IMHO a stupid idea to start with.

OK, message me your TXID again and I'll check that once more !

zoggie

newbie

Activity: 25

Merit: 0

Quote from: ocminer on January 31, 2017, 08:48:39 PM

Quote from: zoggie on January 31, 2017, 11:39:23 AM

confirmed this morning by Poloniex that suprnova is broken.

quoted from Poloniex staff ...
"It seem that transaction was sent without a xmr payment id"

Till this is fixed can't mine at suprnova.

Sad considering this looked to be decently maintained but appears pool operator ocminer is too busy with pascal these days.

I'm mining on my own pool and I also withdraw to polo.

even if you send a payment without payment id to polo, just send them the TXID and the exact amount of your payment and they can still credit the amount to your account - since it's been transferred to their account...

There are three checks in the pool software that sending to polo's address is impossible without payment id, first when entering the address, the second when verifying the address and the last when sending to that address.. I doubt it was really sent without polo payment id.. IMHO those ring-ct's have problems sometimes since XMR updated / forked.

Chainradar shows NO payment ID (I PM'd you the details)
Poloniex said it was sent with NO payment ID and they are forwarding to another department to see if they will credit me or not. 48 hours later, no credit yet.

I believe you when you say there are checks in place. Previous payments went through without an issue. I was one of the first to beta test this but this last transaction failed. Having to waste all this time to chase it up, and still no funds, still waiting, something is still broken somewhere.

Non integrated payment ID's where IMHO a stupid idea to start with.

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: zoggie on January 31, 2017, 11:39:23 AM

confirmed this morning by Poloniex that suprnova is broken.

quoted from Poloniex staff ...
"It seem that transaction was sent without a xmr payment id"

Till this is fixed can't mine at suprnova.

Sad considering this looked to be decently maintained but appears pool operator ocminer is too busy with pascal these days.

I'm mining on my own pool and I also withdraw to polo.

even if you send a payment without payment id to polo, just send them the TXID and the exact amount of your payment and they can still credit the amount to your account - since it's been transferred to their account...

There are three checks in the pool software that sending to polo's address is impossible without payment id, first when entering the address, the second when verifying the address and the last when sending to that address.. I doubt it was really sent without polo payment id.. IMHO those ring-ct's have problems sometimes since XMR updated / forked.

Topic: XMR Monero Pool xmr.suprnova.cc MPOS Based PPLNS - page 3. (Read 13938 times)