[XPM]unofficial jhPrimeminer thread - page 40.

tinnvec

newbie

Activity: 54

Merit: 0

Quote from: Tommo_Aus on August 02, 2013, 02:41:24 AM

tinnvec - What settings are you using? I can't seem to get much more than this out of a stock i7 3820:

5ch/h: 528.74 - 6ch/h: 39.05

I've using -d 8 -s 2000000 at the moment, looks like I'm far off the mark.

EDIT - although looking at your output it looks more like v4 output rather than v5, my results above are on v5

Yeah that was v4 at default settings and stock clock speed on my i7 3770k

Testing v5 now, got a long day of driving ahead, so I'll report back tonight when I get home with results

mechs

full member

Activity: 210

Merit: 100

Quote from: mumus on August 02, 2013, 10:28:41 AM

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

I'm checking this right now.

I have not been having this trouble in any of my 5 windows systems.

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: refer_2_me on August 02, 2013, 10:29:57 AM

Quote from: mumus on August 02, 2013, 10:28:41 AM

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

I'm checking this right now.

Great, thanks alot!

If it matters, i'm running it through wine on Ubuntu 13.04.

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: mumus on August 02, 2013, 10:28:41 AM

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

I'm checking this right now.

Great, thanks alot!

mumus

sr. member

Activity: 291

Merit: 250

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

I'm checking this right now.

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: ivanlabrie on August 02, 2013, 10:08:51 AM

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

Same here, is v4 better for you?

Yeah, v4 seems pretty stable. I have been running it for a few days since it was released with no problems.
I like the new interface of v5, though.

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: refer_2_me on August 02, 2013, 09:05:26 AM

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

Same here, is v4 better for you?

gigawatt

full member

Activity: 168

Merit: 100

Quote from: hasle2 on August 02, 2013, 09:50:21 AM

Does running multiple machines using one worker on ypool cause any problems?

Nope. (Unless you're pointing a few thousand machines at it)

hasle2

full member

Activity: 122

Merit: 100

Does running multiple machines using one worker on ypool cause any problems?

refer_2_me

full member

Activity: 213

Merit: 100

I'm having an issue with v5. It starts fine, but after about an hour, the load for each CPU is around 20%? Any idea why that is happening? I'm reverting to v4 for now.

paymetodostuff

member

Activity: 88

Merit: 10

Quote from: bitwarrior on August 02, 2013, 08:33:42 AM

having problems getting the same amount of shares..(yes I know it was stated in the update) but its way below what I have achieved using the v4..using the same settings that I have used...way above 50% reduction on submission of shares... I am using an i7 4 core cpu.

They stopped counting 5ch shares sometime yesterday. My overall share count has gone way down as well because of it.

bitwarrior

legendary

Activity: 1764

Merit: 1000

having problems getting the same amount of shares..(yes I know it was stated in the update) but its way below what I have achieved using the v4..using the same settings that I have used...way above 50% reduction on submission of shares... I am using an i7 4 core cpu.

mechs

full member

Activity: 210

Merit: 100

Quote from: bitwarrior on August 02, 2013, 03:56:21 AM

You might try putting -s 3000000 and leaving all the rest by default , it might give some increase on the share counts.. im using the v5 ... it is really way behind what v4 has offered.

I hope they have a better update than this on their next release.. and pls dont forget the 32 bit binaries Wink

Thanks

Way behind in what way?

zax983

full member

Activity: 156

Merit: 100

Quote from: cabin on July 28, 2013, 11:42:05 AM

I optimized this build a bit further.. especially for slower CPU's, dual core etc.

https://www.dropbox.com/s/z8s7wbm0sg3mvnq/jhPrimeminer.zippy

Ex. jhPrimeMiner.exe -s 100000 -t 2 -o http://ypool.net:10034 -u cabin.xpm_1 -p x

On a 2.9Ghz Intel Duo E7500 I see:
Shares/h: 35.80 - 5ch/h: 179.02 - PPS: 1429 - Best: 4.940110 - Max: 6.566634

Note that the PPS stat now shows primes per second again, not attempts per second.

Is it best version for my i3-2125? Can you tell me best settings for it?

P.S. How much I have to pay, if you agree to unlock your miner for solo mining? Or maybe I will have to ask the pool developers or both you and pool?

Sy

legendary

Activity: 1484

Merit: 1003

Bounty Detective

Quote from: billym2k on August 01, 2013, 10:04:07 PM

Thanks for all your work mumus!

One thing I noticed -- If I run jhPrimeminer.exe overnight, my PPS seems to go down from when it initially ran (from 44k -> 29k), is this something others are experiencing? Could it just be due to something like CPU throttling for heat? When I restart, my PPS goes back up to the top. This was also with v4, just started with v5 Cheesy

Guess you are usually lucky at the beginning and the numbers even themself out over time...

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: altsay on August 02, 2013, 04:42:11 AM

How to compile on Linux?

Download the binary. Run with wineconsole.

altsay

sr. member

Activity: 359

Merit: 250

How to compile on Linux?

bitwarrior

legendary

Activity: 1764

Merit: 1000

You might try putting -s 3000000 and leaving all the rest by default , it might give some increase on the share counts.. im using the v5 ... it is really way behind what v4 has offered.

I hope they have a better update than this on their next release.. and pls dont forget the 32 bit binaries Wink

Thanks

Tommo_Aus

sr. member

Activity: 420

Merit: 250

tinnvec - What settings are you using? I can't seem to get much more than this out of a stock i7 3820:

5ch/h: 528.74 - 6ch/h: 39.05

I've using -d 8 -s 2000000 at the moment, looks like I'm far off the mark.

EDIT - although looking at your output it looks more like v4 output rather than v5, my results above are on v5

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: jdebunt on August 02, 2013, 02:13:28 AM

Downloaded the new version & running now, let's see what we get ^^

Seems like ypool sucks sadly... Sad

Topic: [XPM]unofficial jhPrimeminer thread - page 40. (Read 180201 times)