[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! - page 463.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: wttbs on November 07, 2014, 11:52:14 AM

Quote from: lowbander80 on November 07, 2014, 11:07:28 AM

an SP-10 for 48hours http://solo.ckpool.org/users/17d4Cki2U1JQ2n4ZwabGoob2cVpX5W8aXA

Just to test my luck!!!

Good luck ! I had ±26TH for 3 days on the pool and no luck Cry

Yes it's scary, the more you throw at it the greater your chances, but the chances are still very slim so you stand to lose more as well. One needs to have balls of steel to stick it out...

However this guy takes the cake for throwing the most hardware at the pool for the least effectiveness:

Code:

{"hashrate1m": "34.4G", "hashrate5m": "36.3G", "hashrate1hr": "36.3G", "hashrate1d": "37.6G", "hashrate7d": "30.8G", "workers": 2389}

And yes it really does appear he has over 2000 workers. Looks like a botnet. Luckily ckpool can handle tons of connections without breaking into a sweat.

DanielRo

hero member

Activity: 694

Merit: 501

Quote from: -ck on November 07, 2014, 04:38:32 PM

Quote from: DanielRo on November 07, 2014, 11:54:56 AM

Hy Con.
I think the hashrate1d is not accurate. My miner is working from more than 24 hours and hashrate1d it shows only half of the hash rate.

The time (1 day) is the time constant for the exponential function, it doesn't just look at "the last 1 day's worth of hashes" which gives a much more stable and accurate value. If you understand exponential functions you'll note it will give you ~63% of the hashrate at precisely 1 day from starting at zero. However over many days it then gives you a much better "rolling average" than the instantaneous type of measurement..

I get it. After about one week of working without interruption will have, let's say 90% or 99% accuracy, depending of the exponential funtion.
I realised that the hashrate7d will increase as time will pass but I was thinking hashrate1d must increase more rapidly. From my point of view hashrate1d should have 95% accuracy after three working days. Just an advice.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: DanielRo on November 07, 2014, 11:54:56 AM

Hy Con.
I think the hashrate1d is not accurate. My miner is working from more than 24 hours and hashrate1d it shows only half of the hash rate.

The time (1 day) is the time constant for the exponential function, it doesn't just look at "the last 1 day's worth of hashes" which gives a much more stable and accurate value. If you understand exponential functions you'll note it will give you ~63% of the hashrate at precisely 1 day from starting at zero. However over many days it then gives you a much better "rolling average" than the instantaneous type of measurement..

DanielRo

hero member

Activity: 694

Merit: 501

Hy Con.
I think the hashrate1d is not accurate. My miner is working from more than 24 hours and hashrate1d it shows only half of the hash rate.

wttbs

legendary

Activity: 2210

Merit: 1109

Quote from: lowbander80 on November 07, 2014, 11:07:28 AM

an SP-10 for 48hours http://solo.ckpool.org/users/17d4Cki2U1JQ2n4ZwabGoob2cVpX5W8aXA

Just to test my luck!!!

Good luck ! I had ±26TH for 3 days on the pool and no luck Cry

lowbander80

legendary

Activity: 1036

Merit: 1000

an SP-10 for 48hours http://solo.ckpool.org/users/17d4Cki2U1JQ2n4ZwabGoob2cVpX5W8aXA

Just to test my luck!!!

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: kano on November 06, 2014, 09:08:52 AM

Integer

Gotcha

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Integer

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: -ck on November 05, 2014, 11:43:17 PM

Quote from: Taugeran on November 05, 2014, 08:16:00 PM

Quote from: -ck on November 05, 2014, 07:47:22 PM

Quote from: Taugeran on November 05, 2014, 07:28:46 PM

does the version of ckpool run on solo.ckpool.com respond to request-diff?

Yes it responds to both the original described form by slush in mining.suggest_difficulty(diff) and the updated implementation of mining.suggest_difficulty with the diff in the params. Only recent cgminers support this, version 4.7.0+ with the --suggest-diff command.

ok just checking, cuz im presently using BFG for my nanofuries at the moment. and BFGs --request-diff fails :/ while im troubleshooting/ coding

for suggest difficulty to succeed does the connection need to be subscribed AND authorized already? or previous to one of these steps?

BFG ignored the stratum specification and the author invented his own version based on hex targets instead of diff because he didn't like it. It will not work with ckpool which works with a diff as slush originally proposed as the standard.

Funsies, so slush/ckpool use a decimal target while bfg uses a hex target. Fml

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: Taugeran on November 05, 2014, 08:16:00 PM

Quote from: -ck on November 05, 2014, 07:47:22 PM

Quote from: Taugeran on November 05, 2014, 07:28:46 PM

does the version of ckpool run on solo.ckpool.com respond to request-diff?

Yes it responds to both the original described form by slush in mining.suggest_difficulty(diff) and the updated implementation of mining.suggest_difficulty with the diff in the params. Only recent cgminers support this, version 4.7.0+ with the --suggest-diff command.

ok just checking, cuz im presently using BFG for my nanofuries at the moment. and BFGs --request-diff fails :/ while im troubleshooting/ coding

for suggest difficulty to succeed does the connection need to be subscribed AND authorized already? or previous to one of these steps?

BFG ignored the stratum specification and the author invented his own version based on hex targets instead of diff because he didn't like it. It will not work with ckpool which works with a diff as slush originally proposed as the standard.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

Quote from: -ck on November 05, 2014, 07:47:22 PM

Quote from: Taugeran on November 05, 2014, 07:28:46 PM

does the version of ckpool run on solo.ckpool.com respond to request-diff?

Yes it responds to both the original described form by slush in mining.suggest_difficulty(diff) and the updated implementation of mining.suggest_difficulty with the diff in the params. Only recent cgminers support this, version 4.7.0+ with the --suggest-diff command.

ok just checking, cuz im presently using BFG for my nanofuries at the moment. and BFGs --request-diff fails :/ while im troubleshooting/ coding

for suggest difficulty to succeed does the connection need to be subscribed AND authorized already? or previous to one of these steps?

elduderino

full member

Activity: 143

Merit: 100

Using some expensive heaters

Quote from: wttbs on November 05, 2014, 07:27:59 PM

Quote from: elduderino on November 05, 2014, 07:09:40 PM

Quote from: -ck on November 05, 2014, 06:58:49 PM

Quote from: elduderino on November 05, 2014, 06:40:28 PM

Quick question: I was wondering how it might be possible for 2 members to use the solo mining for, um, teamed-solo mining (or mini-pool)?

In other words, if someone has some decent THashes, but isn't quite sure he can do it with his farm, could we team up with another member to increase our total THashes & increase our odds of scoring a block (Say, 15 TH + 15 TH = 30 THs)?

If so, is there a way we might both be able to get notified/verify the found block?

Thank you in advance!

If you implicitly trust each other you can just mine to the same btc address for that effect. If there's any doubt you can get yourself a multisig address to mine to that you both need to sign separately and both of you mine to that address.

Hey, cool. Thanks for the quick response.

If folks can find an answer that fills the need, I think you might find your little pool to be quite popular! Wink

Armory Wallet supports Multi-sign… is that a solution for you?
https://bitcoinarmory.com/faq/#q15

Nice find, man. I'll check it out...
But, yes... it looks like this could do, from what I see.
Thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: Taugeran on November 05, 2014, 07:28:46 PM

does the version of ckpool run on solo.ckpool.com respond to request-diff?

Yes it responds to both the original described form by slush in mining.suggest_difficulty(diff) and the updated implementation of mining.suggest_difficulty with the diff in the params. Only recent cgminers support this, version 4.7.0+ with the --suggest-diff command.

Taugeran

hero member

Activity: 658

Merit: 500

CCNA: There i fixed the internet.

does the version of ckpool run on solo.ckpool.com respond to request-diff?

wttbs

legendary

Activity: 2210

Merit: 1109

Quote from: elduderino on November 05, 2014, 07:09:40 PM

Quote from: -ck on November 05, 2014, 06:58:49 PM

Quote from: elduderino on November 05, 2014, 06:40:28 PM

Quick question: I was wondering how it might be possible for 2 members to use the solo mining for, um, teamed-solo mining (or mini-pool)?

In other words, if someone has some decent THashes, but isn't quite sure he can do it with his farm, could we team up with another member to increase our total THashes & increase our odds of scoring a block (Say, 15 TH + 15 TH = 30 THs)?

If so, is there a way we might both be able to get notified/verify the found block?

Thank you in advance!

If you implicitly trust each other you can just mine to the same btc address for that effect. If there's any doubt you can get yourself a multisig address to mine to that you both need to sign separately and both of you mine to that address.

Hey, cool. Thanks for the quick response.

If folks can find an answer that fills the need, I think you might find your little pool to be quite popular! Wink

Armory Wallet supports Multi-sign… is that a solution for you?
https://bitcoinarmory.com/faq/#q15

elduderino

full member

Activity: 143

Merit: 100

Using some expensive heaters

Quote from: -ck on November 05, 2014, 06:58:49 PM

Quote from: elduderino on November 05, 2014, 06:40:28 PM

Quick question: I was wondering how it might be possible for 2 members to use the solo mining for, um, teamed-solo mining (or mini-pool)?

In other words, if someone has some decent THashes, but isn't quite sure he can do it with his farm, could we team up with another member to increase our total THashes & increase our odds of scoring a block (Say, 15 TH + 15 TH = 30 THs)?

If so, is there a way we might both be able to get notified/verify the found block?

Thank you in advance!

If you implicitly trust each other you can just mine to the same btc address for that effect. If there's any doubt you can get yourself a multisig address to mine to that you both need to sign separately and both of you mine to that address.

Hey, cool. Thanks for the quick response.

If folks can find an answer that fills the need, I think you might find your little pool to be quite popular! Wink

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: elduderino on November 05, 2014, 06:40:28 PM

Quick question: I was wondering how it might be possible for 2 members to use the solo mining for, um, teamed-solo mining (or mini-pool)?

In other words, if someone has some decent THashes, but isn't quite sure he can do it with his farm, could we team up with another member to increase our total THashes & increase our odds of scoring a block (Say, 15 TH + 15 TH = 30 THs)?

If so, is there a way we might both be able to get notified/verify the found block?

Thank you in advance!

If you implicitly trust each other you can just mine to the same btc address for that effect. If there's any doubt you can get yourself a multisig address to mine to that you both need to sign separately and both of you mine to that address.

mavericklm

hero member

Activity: 742

Merit: 500

+1

elduderino

full member

Activity: 143

Merit: 100

Using some expensive heaters

Quick question: I was wondering how it might be possible for 2 members to use the solo mining for, um, teamed-solo mining (or mini-pool)?

In other words, if someone has some decent THashes, but isn't quite sure he can do it with his farm, could we team up with another member to increase our total THashes & increase our odds of scoring a block (Say, 15 TH + 15 TH = 30 THs)?

If so, is there a way we might both be able to get notified/verify the found block?

Thank you in advance!

coiners99

newbie

Activity: 42

Merit: 0

im join.. wish us luck guys!!!!

Grin

Topic: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! - page 463. (Read 1514844 times)