Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 5.

WickedPigeon

member

Activity: 345

Merit: 16

Quote from: XSlowHand on February 22, 2019, 10:40:09 AM

Hi Dev
Hi x16r Comunity
Hi z-enemy comunity

I have a Rig with 3 1080 and 4 1080TI. For months they have been running just fine. Since about a week (I installed the latest NVIDIA Driver) one of the 1080TIs keeps crashing around 15 mins after starting the miner. The "good" thing is, it doesnt seem to kill the miner and I would only notice it when checking power consumption or looking at GPU temps in Afterburner.
GPU fans keep spinning etc.
I havnt had time yet to debug (e.g. run card in isolation, revert driver, try different mining software, etc).
But before I start debugging, I would like to ask if anyone had experienced a similar issue and maybe solved it; please let me know; also appreciate any suggestion for debugging

Mining x16r on ravenminer EU, +20CC, -502MC, 70%PL.
What other information would you need?
Thanks in advance for any help.
Slow

I've had problems somewhat like this in the past, and it was the power supply. X16 can have moments where it pulls so much that it overloads the PSU and one or two of the GPUs stop working. Just a thought.
Good luck

XSlowHand

newbie

Activity: 5

Merit: 0

Hi Dev
Hi x16r Comunity
Hi z-enemy comunity

I have a Rig with 3 1080 and 4 1080TI. For months they have been running just fine. Since about a week (I installed the latest NVIDIA Driver) one of the 1080TIs keeps crashing around 15 mins after starting the miner. The "good" thing is, it doesnt seem to kill the miner and I would only notice it when checking power consumption or looking at GPU temps in Afterburner.
GPU fans keep spinning etc.
I havnt had time yet to debug (e.g. run card in isolation, revert driver, try different mining software, etc).
But before I start debugging, I would like to ask if anyone had experienced a similar issue and maybe solved it; please let me know; also appreciate any suggestion for debugging

Mining x16r on ravenminer EU, +20CC, -502MC, 70%PL.
What other information would you need?
Thanks in advance for any help.
Slow

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Quote from: tbearhere on February 20, 2019, 12:33:04 PM

Quote from: JFoxOne on February 20, 2019, 11:06:05 AM

Quote from: luc1an on February 14, 2019, 07:43:07 AM

Is there any way to benchmark with Z-Enemy? I would like to have benchmarks for X16R, but it always goes straight to mining
Thanks

This is X16R benchmarked with 1x Nvidia 1080
https://minerstat.com/benchmark/t5dmftvqnr#x16r

What about bitcore?

https://minerstat.com/benchmark/t5dmftvqnr#timetravel10

tbearhere

legendary

Activity: 3122

Merit: 1003

Quote from: JFoxOne on February 20, 2019, 11:06:05 AM

Quote from: luc1an on February 14, 2019, 07:43:07 AM

Is there any way to benchmark with Z-Enemy? I would like to have benchmarks for X16R, but it always goes straight to mining
Thanks

This is X16R benchmarked with 1x Nvidia 1080
https://minerstat.com/benchmark/t5dmftvqnr#x16r

What about bitcore?

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Quote from: luc1an on February 14, 2019, 07:43:07 AM

Is there any way to benchmark with Z-Enemy? I would like to have benchmarks for X16R, but it always goes straight to mining
Thanks

This is X16R benchmarked with 1x Nvidia 1080
https://minerstat.com/benchmark/t5dmftvqnr#x16r

legendary13

newbie

Activity: 29

Merit: 0

is it difficult to wrtite list of supported algos?

luc1an

newbie

Activity: 1

Merit: 0

Is there any way to benchmark with Z-Enemy? I would like to have benchmarks for X16R, but it always goes straight to mining
Thanks

nn47nn

newbie

Activity: 19

Merit: 0

luse Tireks, because of this refused to develop

WickedPigeon

member

Activity: 345

Merit: 16

Quote from: preda on February 06, 2019, 10:49:09 AM

x16r is algo for asic and fpga... not worth anymore with gpu

That ain't it Chief...
There isn't a bunch of asics nor fpgas out there. It's all about prices tanking...
and tanking, and tanking....

preda

sr. member

Activity: 756

Merit: 250

Quote from: ounce on January 29, 2019, 08:30:59 AM

@enemy Good day! Have not long pleased us with new releases when the next one is planned? What are you working on, is it worth waiting for acceleration in the next x16r releases?

x16r is algo for asic and fpga... not worth anymore with gpu

kagami_

jr. member

Activity: 98

Merit: 1

MWEdFS1Fkmq6nA5Zz6QsbULXCC15bv1qR4

Quote from: ounce on January 29, 2019, 08:30:59 AM

@enemy Good day! Have not long pleased us with new releases when the next one is planned? What are you working on, is it worth waiting for acceleration in the next x16r releases?

Curious about this as well.

ounce

newbie

Activity: 3

Merit: 0

@enemy Good day! Have not long pleased us with new releases when the next one is planned? What are you working on, is it worth waiting for acceleration in the next x16r releases?

spider703

full member

Activity: 1736

Merit: 148

All last miner is on my ftp
Ftp: //radio.r41.ru
And in first message this topic

prominertools

newbie

Activity: 24

Merit: 0

Quote from: jonnytracker on January 07, 2019, 01:14:21 PM

google drive please, Asians cannot download from mega.nz

https://prominertools.com/z-enemy/

WickedPigeon

member

Activity: 345

Merit: 16

Quote from: brittminer on January 17, 2019, 12:31:10 PM

I came to this thread with this exact question. I skimmed through all of the pages but did not see a response. My apologies if I missed it.

Is there any sort of watchdog possible? Or a command for the batch file that would work?

I found something posted for the older ccminer. Would this be functional for the latest z-enemy?

:loop
z-enemy -a x16r -o stratumblah:blah -u blah.blah -p x -i 23 -N 800
goto loop

I've had issues with my stratum going down for a moment and being bounced to my backup stratum. I found by adding -R 5, it stopped the problem:

@echo off
:start
z-enemy -a x16r -R 5 -o stratum+tcp://pool.minermore.com:5501 -u Accountblahblah.blah -p d=48 -o stratum+tcp://ravenminer.com:6666 -u accountblahblah -p workername
goto start

brittminer

newbie

Activity: 4

Merit: 0

Quote from: vkorzha on May 12, 2018, 05:31:38 PM

@enemy is there away to build in a sometype of "watchdog" argument into a command line. My x16s and r on z-enemy crashes sometimes due to overclocking, I want to make sure I can specify the miner to auto-restart when problem is encountered and not to wait until I wake in the morning

Can you please help with that?

I came to this thread with this exact question. I skimmed through all of the pages but did not see a response. My apologies if I missed it.

Is there any sort of watchdog possible? Or a command for the batch file that would work?

I found something posted for the older ccminer. Would this be functional for the latest z-enemy?

:loop
z-enemy -a x16r -o stratumblah:blah -u blah.blah -p x -i 23 -N 800
goto loop

joseph32

member

Activity: 412

Merit: 21

Just a sidenote:

+200 Core or anything like this will not help. This fully depends on the used card-model and the base clocks. But 1600+200 or more easy 1800 or something like this will help Wink

HFreeman

newbie

Activity: 23

Merit: 1

Quote from: OpenArtis on January 13, 2019, 04:38:07 PM

Guys I want to ask You about mining efficiency.

I'm using z-enemy miner 1.28 and mine with GTX 1070 + 200 core + 0 mem latest drivers Version 417.35 - WHQL,Release Date Wed Dec 12, 2018

Power consumption by each card is about 145W with efficiency 0.99 to 0,16 MH/W depending on current algo (on Power target +0)

I have switched power target to -30% and now power consumption is 102W/1GPU and efficiency is from 0.086 to 0.18 and I have seen even 0.24MH/W

The problem is that i can see significant drop in mined coins and my question is what settings do You use and/or recommend if I want to mine as many RVN as I can with energy wise settings?

From my experience ,for x16 and x17 more than -10% for power will cause negative effect on your stability and efficiency , so if you have GTX 10xx series , -10% power is best you can use and +200 Core is very good. (Try test and change/increase core clock 1 by 1 .. for example my 1050ti cards working better with +137 and lower on +140)

In other hand , mining Raven coin is a mid/long term investment so if you are looking for faster profit and better selling coins , mine Monero or Ethereum/ETC.

Good luck.

OpenArtis

jr. member

Activity: 72

Merit: 9

Guys I want to ask You about mining efficiency.

I'm using z-enemy miner 1.28 and mine with GTX 1070 + 200 core + 0 mem latest drivers Version 417.35 - WHQL,Release Date Wed Dec 12, 2018

Power consumption by each card is about 145W with efficiency 0.99 to 0,16 MH/W depending on current algo (on Power target +0)

I have switched power target to -30% and now power consumption is 102W/1GPU and efficiency is from 0.086 to 0.18 and I have seen even 0.24MH/W

The problem is that i can see significant drop in mined coins and my question is what settings do You use and/or recommend if I want to mine as many RVN as I can with energy wise settings?

RivAngE

full member

Activity: 728

Merit: 169

What doesn't kill you, makes you stronger

Quote from: crairezx20 on January 12, 2019, 06:40:18 AM

Look like it gives this miner gives me negative profit but the hashrate is increase but why my earnings is decrease compared to last week?

I use the latest version of z-enemy, for now, I switch back to T-rex.

When you're saying "profit", if you mean BTC then I don't know why.
If you're talking about "$$$" then this week brought less profit because there was another BTC selloff.

Topic: Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 5. (Read 106865 times)