Topic: [ZEC][ETH][XMR][EXP][GRS]Reliable DwarfPool- Anonymous, failover worldwide - page 14. (Read 42581 times)
March 21, 2014, 03:30:52 AM
Stuck again, 0 balance and 0 payments for 3 hours.
March 20, 2014, 01:52:15 PM
Connections failure in datacenter, that's why payments delayed.
Both pool servers work fine. Only calculation and payments are stopped.
EDIT: Problem solved by provider.
Both pool servers work fine. Only calculation and payments are stopped.
EDIT: Problem solved by provider.
March 20, 2014, 01:49:37 PM
"Confirmed, but still not on the balance" is growing, DDOS ongoing? :-/
Such message will be showed between calculation of new confirmed block and transfer to balance. May be some minutes. Usually some seconds. March 20, 2014, 09:22:06 AM
"Confirmed, but still not on the balance" is growing, DDOS ongoing? :-/
March 18, 2014, 03:36:11 AM
SCAM POOL.
Earnings for 6 hours = ZERO!
Not scam.Earnings for 6 hours = ZERO!
Due to attack on the pool, the balancing and payments were autostopped , therefore delayed.
After manually checking all payouts were transferred immediately.
March 18, 2014, 02:23:41 AM
SCAM POOL.
Earnings for 6 hours = ZERO!
Earnings for 6 hours = ZERO!
March 17, 2014, 03:55:22 PM
Very good pool, it's the one I use to mine Max due to nearby server and high hashrate (and fee) elsewhere. Anonymous, no-login, no-registration pools are great!
March 17, 2014, 10:56:32 AM
March 17, 2014, 07:53:00 AM
Max pool stuck?
Please, MAX is going up and I didn't get any payout last night! :-(
Dear members, because of a bug in open source pool engine, our pool based on, shares of "moria"-server were not calculated from 15.03.
That's why "erebor"-miners got too many coins, you were overpaid from "moria"-miners.
Yesterday I recalculated all shares and balances for last two days. The payments redistributed fairly according to all your sent shares for this time. Please check your payments summarizing 15-17.03.
PS: I'll sent the patch to developers!
I'm sorry for troubles and Thank you again!
March 17, 2014, 04:45:23 AM
Max pool stuck?
Please, MAX is going up and I didn't get any payout last night! :-(
March 17, 2014, 02:26:50 AM
Max pool stuck?
March 14, 2014, 04:39:15 PM
Thank you!
Dear members, I'd be glad about your votes!
http://vardiff.com/pool/dwarfpool-com/
DwarfPool Quality you can trust!
March 14, 2014, 12:14:09 AM
March 11, 2014, 04:33:23 PM
We have some improvements
1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy.
To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER
Example:
The main way without a number works as before.
2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes.
To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password.
Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly.
1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy.
To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER
Example:
Code:
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3
The main way without a number works as before.
2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes.
To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password.
Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly.
3. Deployed a new server in Japan! eredluin.dwarfpool.com
For users from Asia this will be faster than using our European or American server.
You should use the closest server to your location for best performance!
DwarfPool Quality you can trust!
March 10, 2014, 03:17:53 PM
We have some improvements
1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy.
To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER
Example:
The main way without a number works as before.
2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes.
To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password.
Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly.
1. You can separate your workers without changing the wallet-id. This allows you to get personal vardiff, if you have many rigs located behind stratum-proxy.
To specify the workers just enough to add in username (which is as wallet-id now), a number after point: YOUR_WALLET . NUMBER
Example:
Code:
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.1
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.2
HA5FPuWibнvoqiMPeUVptyGAwqg7y7uV5C.3
The main way without a number works as before.
2. Implemented monitoring of your workers. In case of disconnection from all servers you get an email within 5 minutes.
To enable monitoring just run miner with an email instead of your password. To disable it enough to restart the miner without email as password.
Monitoring works for each worker and IP separately. With WORKER_ID you can monitor your rigs singly.
March 08, 2014, 04:41:32 AM
Max pool stuck at 6 hours ago but still accepting shares = 6 hours of waisted work???
Same problem here.
The pool servers are and have been worked fine all time!
It only concerned the statistic scripts because of the new email monitoring script. All stats is renewed meanwhile and payment made.
Thanks Atrides!
March 08, 2014, 04:29:10 AM
Max pool stuck at 6 hours ago but still accepting shares = 6 hours of waisted work???
Same problem here.
The pool servers are and have been worked fine all time!
It only concerned the statistic scripts because of the new email monitoring script. All stats is renewed meanwhile and payment made.
March 08, 2014, 03:32:37 AM
Max pool stuck at 6 hours ago but still accepting shares = 6 hours of waisted work???
Same problem here.
March 08, 2014, 03:06:58 AM
Max pool stuck at 6 hours ago but still accepting shares = 6 hours of waisted work???
February 28, 2014, 09:19:09 AM
Thanks
I think I use it: the 8192mXkp7Xkg8imomY5Ka just after the -u is my Wallet ID (It's a Wallet from Bter)
I think I use it: the 8192mXkp7Xkg8imomY5Ka just after the -u is my Wallet ID (It's a Wallet from Bter)
It cannot be the wallet-id, because it consists in 34 symbols and begins with "m"
On bter you must click in your account, on "deposit", there must be your wallet-id like this:
Code:
Please send MAX to this address:
mW2RkN4Ut64j31uQn3hjAaF1hGBsP3g8Jg
mW2RkN4Ut64j31uQn3hjAaF1hGBsP3g8Jg
Jump to: