Topic: ZETpool.org | ETH ETC MANY OTHERS | MOST EFFICIENT MINING POOL - page 5. (Read 25449 times)

Thank you for your review!


p.s If meet enough miners demand we can handle it for sure.

p.s2. What sgminer do you use? Need further details. We can check it

My miner works correctly. No issues between zet pool, tested on claymore 10.0, ethos.

I would highly recommend etc pool.

Used different ones, but here payouts are exactly what calculator shows (taking under consideration pool luck of course). I can not say the same about other leading pools. In some cases was even as low as 50% what it should be. Join and enjoy


p.s.

Any plans for ETH pool, most of the time thats most profitable after all.

p.s.2

I can't connect using sgminer. Is it possible? If so whats the command line?

From my single  6x RX 470  I've minted 2.28 ETC/Day.


Full trackable mining history available - checked and ocnfirmed.
Default payout amount = 2 ETC, so alomst 24 hours expected to be paid.

Thumb up!

I am testing it now.


Looks promisng. No visible difference between zet.pool and ethermine or nanopool. Sligthy even better than nanopool. I need more time to confirm my opinion. At this moment I can recommend with no doubts.

Who has to test this pool?

Good payment?

More profitable than ethminer or nanopool?

thx

it work

Is it possible to use dual mining?

Etc with zet technology and siacoin with nanopool for example?

You can't do it like that. You need to add your address and worker name only. Also you port is wrong.

t does not work with claymore at home.

my .bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool etc.pool.zet-tech.eu:8888 -ewal my adress/PC/my mail -r 1


my log :

11:53:08:364   190c   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:53:08:365   190c   º        Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.4         º
11:53:08:366   190c   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:53:08:368   190c   
11:53:08:570   190c   ETH: 1 pool is specified
11:53:08:571   190c   Main Ethereum pool is etc.pool.zet-tech.eu:8888
11:53:08:573   190c   DCR: 0 pool is specified
11:53:08:620   190c   OpenCL platform: AMD Accelerated Parallel Processing
11:53:08:624   190c   OpenCL initializing...

11:53:08:626   190c   AMD Cards available: 1
11:53:08:627   190c   GPU #0: Ellesmere, 8192 MB available, 36 compute units
11:53:08:629   190c   GPU #0 recognized as Radeon RX 480
11:53:08:630   190c   POOL/SOLO version
11:53:08:632   190c   b240
11:53:08:634   190c   Platform: Windows
11:53:08:645   190c   start building OpenCL program...
11:53:13:814   190c   done
11:53:13:816   190c   GPU #0: set -etha as 0 (ETH algo for fast cards)
11:53:13:818   190c   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
11:53:13:820   190c   No NVIDIA CUDA GPUs detected.
11:53:13:822   190c   Total cards: 1
11:53:13:842   190c   No NVIDIA cards in the list, NVML library will not be used.
11:53:13:849   19f4   ETH: Stratum - connecting to 'etc.pool.zet-tech.eu' <150.254.78.102> port 8888
11:53:13:901   19f4   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9ecab1236cd3ef9873f281ebe8d16d370172a299/PC/[email protected]", ""], "id": 2, "method": "eth_submitLogin"}

11:53:13:903   19f4   ETH: Stratum - Connected (etc.pool.zet-tech.eu:8888)
11:53:13:945   190c   No pool specified for Decred! Ethereum-only mining mode is enabled

11:53:13:946   190c   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

11:53:13:951   190c   ETH: eth-proxy stratum mode
11:53:13:953   190c   Watchdog enabled
11:53:13:955   190c   Remote management is enabled on port 3333
11:53:13:956   190c   

11:53:13:960   19f4   got 88 bytes
11:53:13:961   19f4   buf: HTTP/1.1 400 Bad Request
Content-Type: text/plain
Connection: close

400 Bad Request
11:53:13:963   19f4   buf: HTTP/1.1400BadRequest
Content-Type:text/plain
Connection:close

400BadRequest
11:53:17:285   19f4   checkread timeout
11:53:20:599   19f4   checkread timeout
11:53:23:910   19f4   checkread timeout
11:53:27:226   19f4   checkread timeout
11:53:30:543   19f4   checkread timeout
11:53:33:864   19f4   checkread timeout
11:53:37:181   19f4   checkread timeout
11:53:40:500   19f4   checkread timeout
11:53:43:813   19f4   checkread timeout
11:53:43:815   19f4   ETH: Job timeout, disconnect, retry in 20 sec...
11:53:44:428   190c   GPU0 t=48C fan=0%
11:53:44:430   190c   em hbt: 30593, fm hbt: 31,
11:53:44:438   190c   watchdog - thread 0, hb time 62
11:53:44:440   190c   watchdog - thread 1, hb time 62
11:54:03:817   19f4   ETH: Stratum - connecting to 'etc.pool.zet-tech.eu' <150.254.78.102> port 8888
11:54:03:871   19f4   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9ecab1236cd3ef9873f281ebe8d16d370172a299/PC/[email protected]", ""], "id": 2, "method": "eth_submitLogin"}

11:54:03:873   19f4   ETH: Stratum - Connected (etc.pool.zet-tech.eu:8888)
11:54:03:931   19f4   got 88 bytes
11:54:03:932   19f4   buf: HTTP/1.1 400 Bad Request
Content-Type: text/plain
Connection: close

400 Bad Request
11:54:03:934   19f4   buf: HTTP/1.1400BadRequest
Content-Type:text/plain
Connection:close

400BadRequest
11:54:07:247   19f4   checkread timeout
11:54:10:560   19f4   checkread timeout
11:54:13:876   19f4   checkread timeout
11:54:15:013   190c   GPU0 t=49C fan=0%
11:54:15:015   190c   em hbt: 11188, fm hbt: 79,
11:54:15:017   190c   watchdog - thread 0, hb time 0
11:54:15:018   190c   watchdog - thread 1, hb time 0
11:54:17:191   19f4   checkread timeout
11:54:20:509   19f4   checkread timeout
11:54:23:826   19f4   checkread timeout
11:54:27:142   19f4   checkread timeout
11:54:30:463   19f4   checkread timeout
11:54:33:780   19f4   checkread timeout
11:54:33:781   19f4   ETH: Job timeout, disconnect, retry in 20 sec...
11:54:45:589   190c   GPU0 t=49C fan=0%
11:54:45:591   190c   em hbt: 41766, fm hbt: 16,
11:54:45:593   190c   watchdog - thread 0, hb time 32
11:54:45:594   190c   watchdog - thread 1, hb time 32
11:54:53:785   19f4   ETH: Stratum - connecting to 'etc.pool.zet-tech.eu' <150.254.78.102> port 8888
11:54:53:836   19f4   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9ecab1236cd3ef9873f281ebe8d16d370172a299/PC/[email protected]", ""], "id": 2, "method": "eth_submitLogin"}

11:54:53:839   19f4   ETH: Stratum - Connected (etc.pool.zet-tech.eu:8888)
11:54:53:895   19f4   got 88 bytes
11:54:53:897   19f4   buf: HTTP/1.1 400 Bad Request
Content-Type: text/plain
Connection: close

400 Bad Request
11:54:53:898   19f4   buf: HTTP/1.1400BadRequest
Content-Type:text/plain
Connection:close

400BadRequest
11:54:57:209   19f4   checkread timeout
11:55:00:519   19f4   checkread timeout
11:55:03:834   19f4   checkread timeout
11:55:07:149   19f4   checkread timeout
11:55:10:463   19f4   checkread timeout
11:55:13:779   19f4   checkread timeout
11:55:16:164   190c   GPU0 t=50C fan=0%
11:55:16:166   190c   em hbt: 22375, fm hbt: 63,
11:55:16:168   190c   watchdog - thread 0, hb time 78
11:55:16:170   190c   watchdog - thread 1, hb time 78
11:55:17:096   19f4   checkread timeout
11:55:20:410   19f4   checkread timeout
11:55:23:727   19f4   checkread timeout
11:55:23:729   19f4   ETH: Job timeout, disconnect, retry in 20 sec...
11:55:43:732   19f4   ETH: Stratum - connecting to 'etc.pool.zet-tech.eu' <150.254.78.102> port 8888
11:55:43:789   19f4   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x9ecab1236cd3ef9873f281ebe8d16d370172a299/PC/[email protected]", ""], "id": 2, "method": "eth_submitLogin"}

11:55:43:791   19f4   ETH: Stratum - Connected (etc.pool.zet-tech.eu:8888)
11:55:43:848   19f4   got 88 bytes
11:55:43:850   19f4   buf: HTTP/1.1 400 Bad Request
Content-Type: text/plain
Connection: close

400 Bad Request
11:55:43:851   19f4   buf: HTTP/1.1400BadRequest
Content-Type:text/plain
Connection:close

400BadRequest
11:55:46:742   190c   GPU0 t=50C fan=0%
11:55:46:744   190c   em hbt: 3016, fm hbt: 94,
11:55:46:746   190c   watchdog - thread 0, hb time 16
11:55:46:748   190c   watchdog - thread 1, hb time 0
11:55:47:166   19f4   checkread timeout
11:55:50:481   19f4   checkread timeout
11:55:53:794   19f4   checkread timeout
11:55:57:114   19f4   checkread timeout
11:56:00:432   19f4   checkread timeout
11:56:03:747   19f4   checkread timeout

It works with claymore?