Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 57. (Read 217685 times)

YES, I AGREE--

But about all any miner is going to get is about 50MH/s from a decent 750ti.       --scryptr

Perhaps, but it would be a whole different setup and not sure how many miners would be interested in another ETH pool....

I'm not sure what can happen if the new stratum server get fnished, if ETH support can be added into it, but I'll keep looking into it. I'd pref to have 1 system for all coins.

each company has different timings in different models.!my card is the gigabyte gtx750ti windforce, Samsung memory,standard clocks   default  1033 boost 1111. Your card has other timings.

AT STOCK CLOCKS 750ti 50MH/s--

At stock clocks, my 750ti cards run at 49MH/s with no intensity set (default).  At "-i 23.7",  I get 50MH/s.  My cards are EVGA 750ti FTW.       --scryptr

I have overclocked bios gtx750ti  1333 core/ 6000 mem stable!!! try -i 24 for best performance.

I'm getting 12mhs on my 650ti with ccminer. It feels a bit low, doesn't it?

gtx750ti -i 24   50mhs ,r7260x -w 64 -g 2 -I 19  stable 25mhs.  Unfortunately it has great difficulty and cannot crack we are few miners.

not working on my 390 - i get this error message:

--------------------------------------------------------------
[16:26:05] Started sgminer 5.4.0-nicehash
[16:26:05] * using Jansson 2.7

error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR

[16:26:09] Failed to init GPU thread 0, disabling device 0
[16:26:09] Restarting the GPU from the menu will not fix this.
[16:26:09] Re-check your configuration and try restarting.
Press enter to continue:

--------------------------------------------------------------

I have -w 64 -g 4 -I 19 added to my stratum.  But I'm running the new 64 bit sgminer for lbry and 2 7950's put out 100 Mhash.

Anybody got their sgminer to work on LBRY yet?

I used:

sgminer.exe --kernel lbry -o stratum+tcp://mine.zpool.ca:3334 -u -p c=BTC

but it just sits there waiting for work from zpool

However, ccminer works like a charm 

Aww, thats no good.  There is no way to set up a single port for it outside of the rest of the coins with a different stratum?  All I know is its profitable, and if you could figure out a way, they will come to mine on your pool.  Would be interesting to try out a dual mining with decred as well.  But if you can't thats ok as well.  I just thought it might be a great fit.

you guys have a sha256 coin that my s7 hates to mine.. for about 5 minutes at a time i see 100% rejects and eventually will failover to my 2nd pool, probably from being banned for too many rejects?
unfortunately i have no idea what coin it is as the current coin is not listed..


my speed is also about 1th slower then reported by the miner.. i do have ES enabled and the diff is set to 8190.

It's not compatible with yiimp stratum unfortunately.

Hey Mr Crackfoo, is Ethereum a good pick for the multipool?  I hate the thought of having to use another pool for my ethereum coin needs.  I have a dual amd 7950 setup that just screams ether for testing for 2 weeks.

ok i think i got it and i setup lbry too. it seems that it will leave 2 windows open. the chosen algo and one other i manually close the one that was not chosen. not sure if i wait long enough it will close on its own. i am using the new fork of 1.8 that has x11evo and lbry support. http://cryptomining-blog.com/8125-updated-ccminer-1-8-fork-by-tpruvot-with-lbry-support/

Hi, thanks for the lbry algo and all your work.

2 Questions :

1 : If zpool and yiimp work on the same lbc block, how does it work? If yiimp found it we didnt have reward?
Example : If yiimp found the block after 5 hours of zpool share. Im getting nothing right?

2 : Did it really worth mining lbc and did the profit is real vs profit*** section and nomber of people who mine it ?
Example : It take 10 hours to get 100 (1 block) lbc for 25 miner and my shares are 1%. I'm gonna have 1 lbc for 10 hours of mining who not worth it.

Thanks

Awesome work! Just wondering how to figure out what my normalized settings should be? is there a formula for figuring this out? some of my hashrates are above.

crackfoo:  any chance you can add the ability to show last 24 hour earnings graph in different selectable time ranges?  lets say last 2 hours, last 4 hours, last 8, last 12, etc.    would be kinda nice.  Maybe something like a dropdown menu....

Working at batch updates.  Trying to have a complete package with individual batches for all algos so you can normalize yourself easily.

Things on the list:
1) Add optimized lyra2
2) Add optimized neoscrypt
3) Add nvidia NVPSMI P0 state force
4) Assess need for static application location
5) Remove timer, clean up recursiveness and active application detection

Will need feedback if the neoscrypt version doesn't work on non maxwell models.

Trying to add dynamic system path redundancy to be able to force video card p-state to P0  every loop.   From this point on, The batch will require the default nvidia folder name in the %programfiles% [or whatever] folder, and more importantly, the batch will need to be run as administrator.

Running it as administrator has caused a slight issue in the past;  it causes the default directory to be c:/windows/system32 and not where the batch was run from.   So,  I may create a specific folder hierarchy, or better yet, maybe copy it directly into the system32 folder and run from there.

I have some tasks to bite off for this.  But I want it to smooth out all the issues on my plate in one swoop.   Hopefully progress doesn't go slow.


Starting to wonder if learning to code an app in the windows interface might be worth it at this point....   Or maybe whip out borland Turbo C++ to create an app to take functions and pass results.  From there the sky would be the limit and the batch would be a bunch of variables and a chain of calls and a simple loop..... hmmm.....

*edit*  added links to all necessary files and data to the batch link in my sig.    A lot better than searching back and forth.   I commend the people whom have done what I just had to do to make it all in one place for you.  -JK

Wow thanks that is just what i needed thank you so much. 

Try having a look through JaredKaragen's batch file:

https://bitcointalksearch.org/topic/m.15119470