| Content | Score | Started by | Date posted | ||
 |
 |
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
J4bberwock did you get to test your idea of changing the board from chain to sin…
|
n/a | J4bberwock | October 11, 2014, 02:47:57 PM |
|
|
|
[WTB] Antminer S3 UK Only Computer hardware
You might consider buying osmething else, then.https://minereu.com/product/a1-bt…
|
n/a | J4bberwock | October 09, 2014, 11:48:21 AM |
|
|
|
[WTB] Antminer S3 UK Only Computer hardware
wasn't the Bitmain price already including shipping?And you might want to try EM…
|
n/a | J4bberwock | October 09, 2014, 10:58:15 AM |
|
|
|
Gridseed G-blade firmware for ARM (STM32F103RCT6) Mining (Altcoins)
Here is my post with a quick "how to".https://bitcointalk.org/index.php?topic=57…
|
n/a | J4bberwock | October 09, 2014, 04:32:44 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
And here is the firmware needed for the G-Bladehttp://dl.free.fr/vLuvCPiD9I'll m…
|
n/a | J4bberwock | October 09, 2014, 03:44:24 AM |
|
|
|
Gridseed G-blade firmware for ARM (STM32F103RCT6) Mining (Altcoins)
It took me some time to do it, but here is the file someone would need to flash…
|
n/a | J4bberwock | October 09, 2014, 03:07:13 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Quick update.The stencil went quite good, the first board is soldered.The bad ne…
|
n/a | J4bberwock | October 08, 2014, 11:01:22 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
and here is the stencil mask that I'll use tomorrow for toner transfert method.I…
|
n/a | J4bberwock | October 07, 2014, 03:48:24 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Fracking shweet!Once finished, it will need a case too.
|
n/a | J4bberwock | October 07, 2014, 12:03:42 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Beautifully done. Hopefully will get mine fabbed out this upcoming Thursday (My…
|
n/a | J4bberwock | October 07, 2014, 11:13:42 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Awesome! Are you going to offer these as a kit? Would love to assemble one.Onc…
|
n/a | J4bberwock | October 07, 2014, 11:12:19 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
It's time for some soldering job.
|
n/a | J4bberwock | October 07, 2014, 08:05:34 AM |
|
|
|
[WTS] Custom server PSU breakout boards. DPS-2000 BB, HP DL 580 1200 and 1300w Computer hardware
No more stock on DPS 2000 and DPS 1200.That was fast.Next arrival of boards at t…
|
n/a | J4bberwock | October 07, 2014, 03:56:13 AM |
|
|
|
[WTB] Psu over 1000W Europe only Computer hardware
If you need them for ASICs, I can offer Server PSU + breakout boards.I still hav…
|
n/a | J4bberwock | October 06, 2014, 02:52:52 AM |
|
|
|
[WTS] 337867-001 HP DL 580 G3 1300W breakout boards Computer hardware
how much is the set for HP dps 1200w .. psu+16awg cables+board? is this hp dps…
|
n/a | J4bberwock | October 05, 2014, 08:44:09 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
All the chips are connected clock in/clock out which leads to the tx/rx header (…
|
n/a | J4bberwock | October 05, 2014, 07:20:00 AM |
|
|
|
[WTS] Custom server PSU breakout boards. DPS-2000 BB, HP DL 580 1200 and 1300w Computer hardware
do you also sell dps 2000bb>I still have a few that are most likely reserved, ne…
|
n/a | J4bberwock | October 05, 2014, 04:08:56 AM |
|
|
|
[WTS] Custom server PSU breakout boards. DPS-2000 BB, HP DL 580 1200 and 1300w Computer hardware
And here is the DPS-1200 FB Common Slot board
|
n/a | J4bberwock | October 04, 2014, 10:14:20 AM |
|
|
|
[WTS] Custom server PSU breakout boards. DPS-2000 BB, HP DL 580 1200 and 1300w Computer hardware
I've got a custom order for the DPS-2000 BB, so added it to the available for or…
|
n/a | J4bberwock | October 04, 2014, 09:11:53 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I was getting 27 gh average but def seen 30-35 for a while. What I did was groun…
|
n/a | J4bberwock | October 03, 2014, 07:55:27 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
this is just running cgminer with no chip freq or options. undervolted 2.55 @ th…
|
n/a | J4bberwock | October 03, 2014, 05:22:39 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
J4bberwock - this was posted here for cgminer: https://bitcointalk.org/index.php…
|
n/a | J4bberwock | October 03, 2014, 01:55:27 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
15 GH sounds like 8 or so chips are working. 32 chips at 15 GH would mean were o…
|
n/a | J4bberwock | October 02, 2014, 03:04:37 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | J4bberwock | October 02, 2014, 01:24:33 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | J4bberwock | October 02, 2014, 01:20:52 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Got my 4 s1 blades in last night and a few usb to uart converters. Undervolted t…
|
n/a | J4bberwock | October 02, 2014, 07:40:24 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Looks like my proto PCBs are stuck at the customs.DHL tracking2485449805CHAOSiTE…
|
n/a | J4bberwock | October 02, 2014, 07:04:23 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
got same problem like harpss1ngh like i understand ferrite bead possible to chan…
|
n/a | J4bberwock | October 02, 2014, 06:21:45 AM |
|
|
|
[WTS] 2x Hex4M (2x 400ghs) within UK - escrow fine if you pay fees - in hand now Computer hardware
I might be interested in 1 shipped to France, plus your failed S1, and 4 heatsin…
|
n/a | J4bberwock | October 01, 2014, 01:08:06 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Boards should be picked by DHL tomorrow and reach me by Thursday.Nice :-) did yo…
|
n/a | J4bberwock | October 01, 2014, 02:41:59 AM |
|
|
|
[WTS] 2x Hex4M (2x 400ghs) within UK - escrow fine if you pay fees - in hand now Computer hardware
I might be interested in 1 shipped to France, plus your failed S1, and 4 heatsin…
|
n/a | J4bberwock | October 01, 2014, 03:26:26 AM |
|
|
|
[WTS] 2x Hex4M (2x 400ghs) within UK - escrow fine if you pay fees - in hand now Computer hardware
I might be interested in 1 shipped to France, plus your failed S1, and 4 heatsin…
|
n/a | J4bberwock | October 01, 2014, 01:29:54 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I'm wondering if a CP2104 could be used to add in the throttling that the Bitmai…
|
n/a | J4bberwock | September 30, 2014, 03:20:20 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I want Antminer S1 controller for few blades too. I have server racks and server…
|
n/a | J4bberwock | September 30, 2014, 11:20:28 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Boards should be picked by DHL tomorrow and reach me by Thursday.
|
n/a | J4bberwock | September 29, 2014, 07:18:16 AM |
|
|
|
[WTB] your defective Gridseed/Zeus, or SHA256 miners (and other brands) Computer hardware
Just got one from SpAcEDeViL, thanks.Still looking for more dead miners.Anything…
|
n/a | J4bberwock | September 27, 2014, 12:49:13 PM |
|
|
|
{WTB} PSU Breakout Board for Dell Poweredge 2400 Computer hardware
From what I've seen, they are 330w PSUs.Might not be enough for what you want.I…
|
n/a | J4bberwock | September 27, 2014, 12:42:40 PM |
|
|
|
[WTB] Breakout Board Adapter or Server Power Supply Computer hardware
It won't be cost efficient to make breakout board for only 1 psu unless you do i…
|
n/a | J4bberwock | September 27, 2014, 12:36:06 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Is this still being looked at as an RPi project?It seems to have evolved into a…
|
n/a | J4bberwock | September 26, 2014, 07:11:14 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
And here is the routed boardTrim pot at the top left is here to allow fan speed…
|
n/a | J4bberwock | September 25, 2014, 08:57:55 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
i have 20 blades so i would definatly like something like 8 connections :-pand m…
|
n/a | J4bberwock | September 25, 2014, 04:29:02 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Routing of the board finished, but needed thin tracks and clearance I'll have tr…
|
n/a | J4bberwock | September 25, 2014, 02:09:25 AM |
|
|
|
[WTS] Antminer S1 Blades [too cheap] Computer hardware
i have 4 antminer s1 blades for sale send me any offer and i can send them as so…
|
n/a | J4bberwock | September 24, 2014, 02:14:25 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Quick update.I will debug this afternoon and build a first proto tomorrow.This t…
|
n/a | J4bberwock | September 24, 2014, 03:51:53 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
ok, I am interested in buying some. good work J4bberwock.For now, we still need…
|
n/a | J4bberwock | September 24, 2014, 04:20:41 AM |
|
|
|
Flashing Firmware of gold gridseed miners? Mining (Altcoins)
necroing, where can firmware be found? got a bunch of red units I'd like to play…
|
n/a | J4bberwock | September 23, 2014, 05:07:55 PM |
|
|
|
[WTB] HD6950, HD6970, HD5870 Computer hardware
I have a few spare 5870 I could sell, probably 10 or more. All should have the b…
|
n/a | J4bberwock | September 23, 2014, 12:25:21 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Great going J4bberwock. Looking to see further developments.I'm proud to be the…
|
n/a | J4bberwock | September 23, 2014, 03:13:45 AM |
|
|
|
[WTB] FPGA's Icarus Cairnsmore Computer hardware
Still looking for FPGA's i have one for sale, although its in europeIf OP don'…
|
n/a | J4bberwock | September 22, 2014, 03:20:11 AM |
|
|
|
[WTB- UK/EU] Bitmain S2 Base Plate (what the hashing boards slot into) Computer hardware
what's broken on your base plate?Maybe it could be fixed.PM me with details, and…
|
n/a | J4bberwock | September 21, 2014, 04:41:51 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
As for the Vid/Pid, I've used the same values that are used for ant U1/U2 since…
|
n/a | J4bberwock | September 21, 2014, 03:27:01 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Still looking for some help on the software side.I'll have a few spare prototype…
|
n/a | J4bberwock | September 21, 2014, 08:44:35 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I figured since this race is mighty well and over, I'd post my lil pet up for th…
|
n/a | J4bberwock | September 21, 2014, 07:57:30 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Still looking for some help on the software side.I'll have a few spare prototype…
|
n/a | J4bberwock | September 21, 2014, 07:14:32 AM |
|
|
|
BFGMiner 4.8.0: GBT+Stratum, RPC, Mac/Linux/Win64, CoinTerra, Tube/T1, Benchmark Mining software (miners)
Hey Luke,Have you made any progress with the S1 drivers? There are a few guys t…
|
n/a | J4bberwock | September 21, 2014, 07:06:30 AM |
|
|
|
[WTB] your defective Gridseed/Zeus, or SHA256 miners (and other brands) Computer hardware
I have 2 hex16a2's. Interested? Located in EU.If you can send them for cheap and…
|
n/a | J4bberwock | September 21, 2014, 01:26:56 AM |
|
|
|
Je rachète (ou répare) vos mineurs Asics Gridseed/Zeus ou SHA246 HS Petites annonces
Je recherche, pour différents projets, des mineurs Zeus ou Gridseed HS.Je ne m'i…
|
n/a | J4bberwock | August 12, 2014, 04:18:00 AM |
|
|
|
Je rachète (ou répare) vos mineurs Asics Gridseed/Zeus ou SHA246 HS Petites annonces
Mise à jour des prix
|
n/a | J4bberwock | September 20, 2014, 02:18:41 PM |
|
|
|
[WTB] your defective Gridseed/Zeus, or SHA256 miners (and other brands) Computer hardware |
n/a | J4bberwock | September 20, 2014, 02:11:10 PM |
|
|
|
[WTB] bare Asicminer BE200 chips Computer hardware
Looking to buy around 5 BE200 chips. PM if you can sell this low of quantity. …
|
n/a | J4bberwock | September 18, 2014, 01:46:59 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Configuration Options Summary: libcurl(GBT+getwork).: Enabled: -lcurl curses.T…
|
n/a | J4bberwock | September 18, 2014, 01:13:03 AM |
|
|
|
OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.6.0 Mining software (miners)
I think I found an error in cgminer version "3.12.0" this is the version bitmain…
|
n/a | J4bberwock | September 17, 2014, 04:06:03 PM |
|
|
|
[WTS] 337867-001 HP DL 580 G3 1300W breakout boards Computer hardware
Hello, i would like to order 2 standard boards. Needs to be shipped to Germany.…
|
n/a | J4bberwock | September 17, 2014, 01:33:07 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
For some reason, it seems that it's only working on 1/4 of the chips, but they a…
|
n/a | J4bberwock | September 17, 2014, 09:59:24 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Just received a few parts that will go in the "hub" board. Still waiting for a f…
|
n/a | J4bberwock | September 17, 2014, 03:57:48 AM |
|
|
|
ANTMINER S3+ -B8 VS ANTMINER S3+ -B9 Hardware
I just buy 2 pcs of B9 today, and I hope they send it as soon is possible. In th…
|
n/a | J4bberwock | September 16, 2014, 02:58:24 PM |
|
|
|
Heating a Space via Mining Hardware
I am sure if we could put a group together interested in home heating from bitco…
|
n/a | J4bberwock | September 16, 2014, 10:54:52 AM |
|
|
|
Antminer S1 Upgrade Kit Hardware
Hi,Broken means, only the ventilator are working.I try to connect blades to othe…
|
n/a | J4bberwock | September 16, 2014, 10:30:06 AM |
|
|
|
BFGMiner 4.8.0: GBT+Stratum, RPC, Mac/Linux/Win64, CoinTerra, Tube/T1, Benchmark Mining software (miners)
Hey Luke,Have you made any progress with the S1 drivers? There are a few guys t…
|
n/a | J4bberwock | September 16, 2014, 02:20:52 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Someone posted this in the BFG Miner thread:https://bitcointalk.org/index.php?to…
|
n/a | J4bberwock | September 16, 2014, 12:29:34 AM |
|
|
|
4 month old NON-overclocked S1 need help with status "x"s on 1 blade Mining support
If it haven't been touched, you can still try to contact bitmaintech for an exch…
|
n/a | J4bberwock | September 15, 2014, 04:47:06 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I believe I've found something.It appears that the S1 chips are supporting singl…
|
n/a | J4bberwock | September 15, 2014, 11:23:47 AM |
|
|
|
Antminer S1 Upgrade Kit Hardware
Someone Can Please Help!I have 2 broken control boards of my old Antminers S1. I…
|
n/a | J4bberwock | September 15, 2014, 09:41:37 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
RX is pin #3 TX is pin #5.Pin 1 is the closest to the 4 pins fan header
|
n/a | J4bberwock | September 15, 2014, 09:15:37 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
You should use the Vendor and product id for the cp2102, same as for the U1 and…
|
n/a | J4bberwock | September 15, 2014, 07:59:07 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I am still trying to catch up on this thread, so bear with me if this has been o…
|
n/a | J4bberwock | September 15, 2014, 06:24:09 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Time for some sleep here.both cgminer and bfgminer are really close to work, but…
|
n/a | J4bberwock | September 14, 2014, 05:00:11 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Before adding the 32 FPGA thing, I was getting 8 sub-units all hashing @0.650 fo…
|
n/a | J4bberwock | September 14, 2014, 04:45:55 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Looks like the only AMU over 10 minutes getting accepted shares is 0aa.But what…
|
n/a | J4bberwock | September 14, 2014, 04:43:32 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Looks like the only AMU over 10 minutes getting accepted shares is 0aa.here is w…
|
n/a | J4bberwock | September 14, 2014, 04:37:05 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
no luck with the mod in bfgminer."no device found"I'm removing the changes I did…
|
n/a | J4bberwock | September 14, 2014, 01:59:36 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
The AFBxx and FBxx are ferrite beads. worst case, you can replace them with zero…
|
n/a | J4bberwock | September 14, 2014, 03:47:19 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
no luck with the mod in bfgminer."no device found"
|
n/a | J4bberwock | September 14, 2014, 12:40:50 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Nice. Now i have one dead blade and one dead raspberry pi Don't know how it co…
|
n/a | J4bberwock | September 14, 2014, 12:25:14 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
cgminer will recognize it as LIX if I enable icarus when compilingU]SB managemen…
|
n/a | J4bberwock | September 14, 2014, 12:10:24 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Nice. Now i have one dead blade and one dead raspberry pi Don't know how it co…
|
n/a | J4bberwock | September 14, 2014, 11:47:35 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
this is an excerpt from bfgminer's driver-antminer.c:i have an idea, if you are…
|
n/a | J4bberwock | September 14, 2014, 11:40:44 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
could it be that they faked Vid/pid to send work to 4 different "8 chips" units…
|
n/a | J4bberwock | September 14, 2014, 08:23:11 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
[2014-09-14 07:03:29] USB res lock BitmainAntS1 1-3 [2014-09-14 07:03:29] RES: B…
|
n/a | J4bberwock | September 14, 2014, 08:07:03 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Looks like untouched usbutils.c. Untill i edit this i get same error. I've just…
|
n/a | J4bberwock | September 14, 2014, 07:02:36 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Is this still going on? If so, I wouldn't mind giving 20$ for the pot. I don't m…
|
n/a | J4bberwock | September 14, 2014, 06:59:11 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I'll try to edit the usbutil to add the numbers it found
|
n/a | J4bberwock | September 14, 2014, 06:34:27 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
[2014-09-14 05:24:14] Generated stratum work [2014-09-14 05:24:14] Pushing work…
|
n/a | J4bberwock | September 14, 2014, 06:23:48 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Try runing with -debug and post log here.I was compiling bfgminer, and it's dete…
|
n/a | J4bberwock | September 14, 2014, 06:03:22 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
For some reasons, it's now detected but inactiveQuoteSelect an option or any oth…
|
n/a | J4bberwock | September 14, 2014, 05:33:37 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
For some reasons, it's now detected but inactiveQuoteSelect an option or any oth…
|
n/a | J4bberwock | September 14, 2014, 04:38:43 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Currently compiling the Kano fork of cgminer supporting the antS1 on a RPi with…
|
n/a | J4bberwock | September 13, 2014, 04:17:33 PM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
Currently compiling the Kano fork of cgminer supporting the antS1 on a RPi with…
|
n/a | J4bberwock | September 13, 2014, 01:51:13 PM |
|
|
|
Avalon4(A3222) 28nm Chips are now on sales @ ehash.com Service Announcements
And a note to any developersDon't use a few chips clocked up to the max, use lot…
|
n/a | J4bberwock | September 13, 2014, 02:19:46 AM |
|
|
|
[DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi Hardware
I can't do more on the software side for now, but I ordered a few parts to make…
|
n/a | J4bberwock | September 12, 2014, 03:48:42 PM |
Jump to: