| Content | Score | Started by | Date posted | ||
 |
 |
BITMAIN Antminer S3 support and OverClocking thread Mining support
What about using Thermal-PAD's instead of Thermal-paste ??Check this PDF catalog…
|
n/a | J4bberwock | July 28, 2014, 07:56:41 AM |
|
|
|
24" PCI-E cables with 16AWG wires and 6" 18awg splitters - great for server PSU Computer hardware
45 cables still available, and about 70 splitters!This means I need to order a n…
|
n/a | J4bberwock | July 28, 2014, 03:29:24 AM |
|
|
|
4 Dead(?) GAWminer Furys 8 Gridseeds ***FOR SALE*** Computer hardware
I have 4 dead GAWminer Furys (Zeusminer Blizzards batch 1) and 8 Dead Gridseeds …
|
n/a | J4bberwock | July 28, 2014, 03:20:16 AM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
Have you called UPS to see what info is missing, I would start there.There appea…
|
n/a | J4bberwock | July 26, 2014, 05:14:21 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Which one of these PSU(800 to 850 W) will you buy? As im not going to OC because…
|
n/a | J4bberwock | July 25, 2014, 03:27:03 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Depends where you live .... if in eu having 240volt you could go for server psu'…
|
n/a | J4bberwock | July 25, 2014, 12:45:12 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
I am starting to wonder if it would just be easier to take the damn gc3355's off…
|
n/a | J4bberwock | July 24, 2014, 11:51:00 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Quick power #'s, measured with my best unit.. and the only one that will hit 500…
|
n/a | J4bberwock | July 24, 2014, 07:44:04 AM |
|
|
|
CGMINER ASIC miner monitoring RPC linux/win/osx/mips/arm/r-pi 4.4.2 Mining software (miners)
New release: Version 4.4.2, 17th July 2014A stable/bugfix/driver update release…
|
n/a | J4bberwock | July 23, 2014, 04:52:04 PM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
I am still waiting on a pencil mod that I run the gear at freq 200 get 400gh an…
|
n/a | J4bberwock | July 23, 2014, 01:27:08 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
For the ones who'd like to try other frequencies, they are in the data sheet ava…
|
n/a | J4bberwock | July 23, 2014, 01:41:58 PM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
For the ones who'd like to try other frequencies, they are in the data sheet ava…
|
n/a | J4bberwock | July 23, 2014, 01:39:48 PM |
|
|
|
[Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD] Hardware
Dogie, any chance you could take a picture of the upper left area from this pict…
|
n/a | J4bberwock | July 23, 2014, 01:14:00 PM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
I am still waiting on a pencil mod that I run the gear at freq 200 get 400gh an…
|
n/a | J4bberwock | July 23, 2014, 12:26:59 PM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
QuoteHow do these machines have any chance to ROI in Europe with the electricity…
|
n/a | J4bberwock | July 23, 2014, 09:12:40 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
And how do you clean the paste off the chip ?? With alcohol ??Isopropyl alcohol…
|
n/a | J4bberwock | July 23, 2014, 01:04:19 AM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
Release B4 they are likely using the last few days to ensure happy B1-B3 custom…
|
n/a | J4bberwock | July 22, 2014, 11:59:06 AM |
|
|
|
BITMAIN Antminer S3 support and OverClocking thread Mining support
Anybody could post high quality pics of the back side of the PCB under the 53355…
|
n/a | J4bberwock | July 22, 2014, 01:19:58 PM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
Release B4 they are likely using the last few days to ensure happy B1-B3 custom…
|
n/a | J4bberwock | July 22, 2014, 04:40:59 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Nice, new blades going for $200, at X-hash?2nd mosfet would help, but would that…
|
n/a | J4bberwock | July 22, 2014, 01:32:44 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Home made Avalon? What is that? Please describe in detail,,,,And what about tryi…
|
n/a | J4bberwock | July 22, 2014, 01:10:31 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Take back the happy part, now after paying Zoom hash 98.00 a piece the things ar…
|
n/a | J4bberwock | July 22, 2014, 12:46:08 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Hi, wolfey, I never tried to overclock to 8MH, the newer blades that are selling…
|
n/a | J4bberwock | July 21, 2014, 04:44:17 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins) |
n/a | J4bberwock | July 21, 2014, 02:47:17 PM |
|
|
|
####[ANN][SCRYPT][0% PREMINE]CCOIN LAUNCHED!!! EARN SOME CCOINS NOW!#### Announcements (Altcoins)
Is this coin still alive or?looks like we finally hit an exchangehttps://c-cex.c…
|
n/a | J4bberwock | July 18, 2014, 02:35:18 PM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
I wont OC so i suppose theres no problem for running 2 S3 with my Corsair CX750M…
|
n/a | J4bberwock | July 18, 2014, 03:57:13 AM |
|
|
|
ANN: BITMAIN has Tested Its 28nm Bitcoin Mining Chip BM1382 Hardware
[Can you supply the part number for the buck regulator component? It's not the b…
|
n/a | J4bberwock | July 18, 2014, 03:13:47 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
32 chips? Holy crap. One blade in my Falcon has 32 chips and there's NO WAY it…
|
n/a | J4bberwock | July 17, 2014, 11:25:48 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Am I mistaken or Zeus is trying to sell mini-blades?https://zeusminer.com/produc…
|
n/a | J4bberwock | July 17, 2014, 09:35:56 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
nst6563, if I understand correctly, some of the "unavoidable" HW errors are job…
|
n/a | J4bberwock | July 15, 2014, 01:26:25 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
I asked myself how they separate the usbinput and the 12v input why this works y…
|
n/a | J4bberwock | July 13, 2014, 03:09:44 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Anyone try changing the crystal yet?What crystal values would correspond to whic…
|
n/a | J4bberwock | July 09, 2014, 04:52:58 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
has anyone mounted two units together ?i plan on running to home depot and getti…
|
n/a | J4bberwock | July 05, 2014, 02:31:33 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
anyone burn out there fury yet from overclocking? if so at what point did it fai…
|
n/a | J4bberwock | July 05, 2014, 12:07:31 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Hi Guys,I have a Blizzard which died (Zeus have already sent me a replacement),…
|
n/a | J4bberwock | July 03, 2014, 11:53:07 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
The trouble is the way data is sent to the chips to tell the frequency. It's lim…
|
n/a | J4bberwock | July 02, 2014, 02:55:53 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
We haven't seen or heard form jab in awhile, does anyone thing he melted his hou…
|
n/a | J4bberwock | July 02, 2014, 12:20:21 AM |
|
|
|
[Guide] Dogie's Comprehensive RockMiner R-Box Setup [HD] Hardware
The code blacklists frequencies above 290 and just ignores your settings, that's…
|
n/a | J4bberwock | July 01, 2014, 01:48:57 PM |
|
|
|
[Guide] Dogie's Comprehensive RockMiner R-Box Setup [HD] Hardware
The code blacklists frequencies above 290 and just ignores your settings, that's…
|
n/a | J4bberwock | July 01, 2014, 01:30:55 PM |
|
|
|
ROCKMINER ASIC miner official thread Hardware
Overclocking anyone?I'm currently working on it, but it seems this thing wasn't…
|
n/a | J4bberwock | July 01, 2014, 05:24:54 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Here are probqbly the best heatsinks for the chips I could find.http://www.moddi…
|
n/a | J4bberwock | June 30, 2014, 06:23:33 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
here is the picture with what you should measure.You simply need to plug the USB…
|
n/a | J4bberwock | June 30, 2014, 11:54:44 AM |
|
|
|
ROCKMINER ASIC miner official thread Hardware
Overclocking anyone?I'm currently working on it, but it seems this thing wasn't…
|
n/a | J4bberwock | June 30, 2014, 11:38:52 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
J4bberwock,Can you please confirm if the REGULATED voltage rails on the blades a…
|
n/a | J4bberwock | June 30, 2014, 01:12:56 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I do agree on the fact that the devices are a little disappointing:Power draw is…
|
n/a | J4bberwock | June 29, 2014, 04:51:27 PM |
|
|
|
Gridseed G-blade firmware for ARM (STM32F103RCT6) Mining (Altcoins)
bin file I have, but after soldering "expert" does not help because he first chi…
|
n/a | J4bberwock | June 29, 2014, 03:05:44 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
I'm not sure a reset will put it alive, but at least, it won't hurt.You can also…
|
n/a | J4bberwock | June 29, 2014, 03:08:51 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
My one blade died, thought it was the upper fet which I replaced, but now when I…
|
n/a | J4bberwock | June 29, 2014, 02:34:45 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Wow, you encounter much more worst scenerio than me..lol im not sure if they wil…
|
n/a | J4bberwock | June 27, 2014, 04:51:26 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Got a reply, but seem like a copy and paste reply. Asking me to send the item ba…
|
n/a | J4bberwock | June 27, 2014, 10:30:09 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Same situation. not detecting any com port.. i am praying hard too.the USB chip…
|
n/a | J4bberwock | June 27, 2014, 08:04:04 AM |
|
|
|
Gridseed G-blade firmware for ARM (STM32F103RCT6) Mining (Altcoins)
sources found here https://github.com/gridseed/usb-miner Compiled firmware somet…
|
n/a | J4bberwock | June 27, 2014, 03:49:17 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
That might work, could be a reset if the blade gets locked up. I remember the ol…
|
n/a | J4bberwock | June 27, 2014, 03:58:23 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I'm running a few GAW Fury miners from this: supply, 30A, $26. The stock Fury dr…
|
n/a | J4bberwock | June 23, 2014, 02:46:20 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Hi guys, i wonder if you are runing this mods with the stuck power supply (The 5…
|
n/a | J4bberwock | June 23, 2014, 12:13:22 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Question: if you mod your blade and add a 33k+ resistor but keep your freq lower…
|
n/a | J4bberwock | June 23, 2014, 12:00:53 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
i measured the resistor i got from the store and they gave me the wrong ones, it…
|
n/a | J4bberwock | June 22, 2014, 08:51:52 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
On the 4th picture, you see the alternate place for the resistor. You can measur…
|
n/a | J4bberwock | June 21, 2014, 02:48:14 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Well, i'm at a lost, i modded one of my blades with a 39k resistor, and it was w…
|
n/a | J4bberwock | June 21, 2014, 02:39:34 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
hi sir,sorry i want to ask you about this post,because I do not understand this,…
|
n/a | J4bberwock | June 21, 2014, 02:11:15 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I've gone up to 2.06v on gridseed. and by the time they will blow, I think they…
|
n/a | J4bberwock | June 20, 2014, 04:21:23 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
I've got three modded blades, and I can't seem to get them above 6.1Mh/s each po…
|
n/a | J4bberwock | June 20, 2014, 03:38:56 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
"Houston, we have had a problem", a crazy modder supplied the chips with 1.6v ev…
|
n/a | J4bberwock | June 20, 2014, 03:24:13 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
"Houston, we have had a problem", a crazy modder supplied the chips with 1.6v ev…
|
n/a | J4bberwock | June 20, 2014, 01:42:19 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I don't suppose anyone has an adjustable clockgen to feed into the bpclk pin huh…
|
n/a | J4bberwock | June 20, 2014, 01:22:10 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
nwoolls has been busy:https://bitcointalk.org/index.php?topic=626361.msg7409154#…
|
n/a | J4bberwock | June 20, 2014, 07:35:36 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
1404 also works as upper gate with 5300 as the lower. I'll try 7437 7430 and 140…
|
n/a | J4bberwock | June 19, 2014, 01:44:48 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I don't know if it's over. Darkwinde and jstefanop were mentioned in Zeus' week…
|
n/a | J4bberwock | June 19, 2014, 01:37:02 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I noticed that the buck controller is rated at a 300khz switching frequency...wo…
|
n/a | J4bberwock | June 18, 2014, 02:56:15 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
We need this damn datasheet for the Zeus chip.The last thing that I see could ha…
|
n/a | J4bberwock | June 18, 2014, 02:23:19 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
We need this damn datasheet for the Zeus chip.The last thing that I see could ha…
|
n/a | J4bberwock | June 18, 2014, 10:52:48 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I might go ahead with the cooling mods on my other Fury today if I have time. T…
|
n/a | J4bberwock | June 18, 2014, 08:14:20 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
I have now IRFB 7437 and IRF 1404 for lower and upper gates.Will it work If I us…
|
n/a | J4bberwock | June 18, 2014, 02:01:00 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I'm also almost sure that the BPCLK pin on the chip is there for something relat…
|
n/a | J4bberwock | June 17, 2014, 09:48:01 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I might go ahead with the cooling mods on my other Fury today if I have time. T…
|
n/a | J4bberwock | June 17, 2014, 08:36:36 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Can anyone recommend some quiet fans that will keep stock Blizzards/Fury's cool?…
|
n/a | J4bberwock | June 17, 2014, 08:25:22 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
ok 2,7 MH is default blade and you get 3,1 out of one board. Isn't cheapper to j…
|
n/a | J4bberwock | June 16, 2014, 02:40:40 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
In the early days of these chips it was thought that they were capable of 300kh/…
|
n/a | J4bberwock | June 16, 2014, 12:56:03 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
ok 2,7 MH is default blade and you get 3,1 out of one board. Isn't cheapper to j…
|
n/a | J4bberwock | June 16, 2014, 12:50:33 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
doesn't the CP2102 have its own internal 48Mhz clock?It shouldn't be affected, b…
|
n/a | J4bberwock | June 16, 2014, 04:44:18 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
in cgminer code, we have something similarQuote#if 1 if(opt_chip_clk>(0xff*…
|
n/a | J4bberwock | June 16, 2014, 04:25:35 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
As requested, pictures of Frankenblade (copyright to me ) have been stable at…
|
n/a | J4bberwock | June 16, 2014, 04:01:33 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I measured Zeus R9 R10 R11 on my boardR11 is in the correct spot on my Week 1 GA…
|
n/a | J4bberwock | June 16, 2014, 12:11:33 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I'll hook the mini blades to the laptop I used when doing the first tests tomorr…
|
n/a | J4bberwock | June 15, 2014, 06:09:41 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
in cgminer code, we have something similarQuote#if 1 if(opt_chip_clk>(0xff*…
|
n/a | J4bberwock | June 15, 2014, 05:59:38 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Looks like raising the max clock doesn't do much. Past 381 and the hashrate goe…
|
n/a | J4bberwock | June 15, 2014, 05:02:32 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
What do you guys think the best img is for RPI and Furys at the time of this pos…
|
n/a | J4bberwock | June 15, 2014, 03:39:03 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Let us know what the third column numbers are when you get back. The numbers th…
|
n/a | J4bberwock | June 15, 2014, 03:36:19 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Thanks for your help. Here is a high-res photo of the pcb area behind the connec…
|
n/a | J4bberwock | June 15, 2014, 03:17:54 PM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Thanks for your help. Here is a high-res photo of the pcb area behind the connec…
|
n/a | J4bberwock | June 15, 2014, 02:07:23 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
I'm crazy so I edited the driver file with a max speed of 1000mhz. I figured th…
|
n/a | J4bberwock | June 15, 2014, 02:00:45 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Might be a software limit. From BFGMiner Zeus driver:Code: info->chips_count =…
|
n/a | J4bberwock | June 15, 2014, 01:31:53 PM |
|
|
|
Fury tuning and mods Mining (Altcoins)
*Reserved*Technical info:From the doc we know the chips have 8 cores.Also it ind…
|
n/a | J4bberwock | June 15, 2014, 12:02:51 PM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
After looking at the schematics from Zeus, they are broadcasting the work across…
|
n/a | J4bberwock | June 15, 2014, 11:23:19 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
My hashrate shows 1,54 on each Fury. There is a hard cap somewhere. Either on th…
|
n/a | J4bberwock | June 15, 2014, 09:46:23 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Regarding the power draw that everybody have asked.2 overclocked Zeus mini-blade…
|
n/a | J4bberwock | June 15, 2014, 04:05:55 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
Now that we have schematics, should we refer to these resistors as R10 and R9?Te…
|
n/a | J4bberwock | June 15, 2014, 01:10:05 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins) |
n/a | J4bberwock | June 15, 2014, 01:00:53 AM |
|
|
|
GRIDSEED G-BLADE Overclocking 7Mh/s Mining (Altcoins)
Can anyone speculate on this? One of my overclocked blades won't mine on one of…
|
n/a | J4bberwock | June 15, 2014, 12:54:15 AM |
|
|
|
Fury/Blizzard tuning and mods Mining (Altcoins)
At clock 515, coinshift says i'm hashing at 4.8-5.0 MH including rejected for 2…
|
n/a | J4bberwock | June 14, 2014, 01:10:31 PM |
Jump to: