| Content | Score | Started by | Date posted | ||
 |
 |
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
No idea. But increasing the voltage (measurable on VCORE testpad, range 550-800m…
|
n/a | sidehack | October 07, 2016, 03:35:29 PM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
Well like I said, I had samples from 2 manufacturers. One of them, the one I had…
|
n/a | sidehack | October 07, 2016, 03:34:11 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Test pads. 1V8 for measuring the 1.8V logic voltage, 0V9 for measuring the 0.9V…
|
n/a | sidehack | October 07, 2016, 02:30:42 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
That's what I was thinking too, why I was recommending he test using only one bo…
|
n/a | sidehack | October 06, 2016, 02:34:01 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
Well, I definitely ignored this thread for about two weeks. Whoops. Followed up…
|
n/a | sidehack | October 06, 2016, 10:37:59 AM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
So I mentioned earlier that the software guy is working on a test stick around a…
|
n/a | sidehack | October 06, 2016, 10:20:26 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Did you try powering the controller and only one or two boards at a time, to mak…
|
n/a | sidehack | October 05, 2016, 10:27:22 PM |
|
|
|
S7 controller has nine 18- pin jacks So what can we do with it? Hardware
Unless the IO board has a nice high-current 3.3V buck regulator on it, and the F…
|
n/a | sidehack | October 05, 2016, 07:12:25 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Did you lose some time in there? At 330MHz I'd expect to see a combined average…
|
n/a | sidehack | October 05, 2016, 02:30:50 PM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
Depends on the software guy. He's actually already integrated BM1384 Compac into…
|
n/a | sidehack | October 04, 2016, 04:26:07 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
The hardware discussed in this thread will cover your Molex needs. Something lik…
|
n/a | sidehack | October 03, 2016, 08:12:00 PM |
|
|
|
5V/12V Molex adapter board, PCIe 6-pin input, 20A capable (GPU rigs and such) Computer hardware
Not sure I follow that logic. For a switching regulator, power out equals power…
|
n/a | sidehack | September 29, 2016, 07:45:46 PM |
|
|
|
What's better? High freq or more ASICs? Mining speculation
From a designer standpoint, it's a tradeoff between initial cost and operating c…
|
n/a | sidehack | September 29, 2016, 06:51:06 PM |
|
|
|
5V/12V Molex adapter board, PCIe 6-pin input, 20A capable (GPU rigs and such) Computer hardware
From what I understand, some risers take in 12V only and have an internal 3.3V r…
|
n/a | sidehack | September 29, 2016, 06:42:17 PM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
There is no relation between a pod miner and any S1/S3/S5 hardware.Anything moun…
|
n/a | sidehack | September 29, 2016, 04:00:28 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I'm working on a little microcontroller PWM driver today which will come in hand…
|
n/a | sidehack | September 29, 2016, 09:35:31 AM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
A new Compac may be forthcoming depending on chip sources and the software guy c…
|
n/a | sidehack | September 28, 2016, 02:28:26 PM |
|
|
|
[FS] GS Server PSUs, boards & kits, custom cables, GPU riser power, made in USA Computer hardware
You can buy the miner and have it shipped here, and I will host it. I charge mon…
|
n/a | sidehack | September 28, 2016, 09:55:47 AM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
And everyone else helping out. To be fair, I'm just the project hub and nothing…
|
n/a | sidehack | September 28, 2016, 09:26:51 AM |
|
|
|
100 watt or less miner.. With 16nm Chips.. Mining speculation
I cannot announce anything official, but let it be known I am working on both ~1…
|
n/a | sidehack | September 28, 2016, 09:00:30 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Probably the only way around it is to intercept the PWM signal to the fan and ro…
|
n/a | sidehack | September 27, 2016, 03:10:46 PM |
|
|
|
5V/12V Molex adapter board, PCIe 6-pin input, 20A capable (GPU rigs and such) Computer hardware
Everyone who's asked about stuff I'll PM with prices today.I just got word the P…
|
n/a | sidehack | September 27, 2016, 07:45:51 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
But if you look at failed boards, he's 2 of 9 for 22% failures.Also, I would bet…
|
n/a | sidehack | September 26, 2016, 12:43:25 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Yeah, and making them put work into warranty support on top of it!
|
n/a | sidehack | September 25, 2016, 07:33:52 PM |
|
|
|
5V/12V Molex adapter board, PCIe 6-pin input, 20A capable (GPU rigs and such) Computer hardware
Need any 6-pin cables for the 12V side, or do you have that taken care of?
|
n/a | sidehack | September 25, 2016, 05:56:23 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
I have put up an official sales thread in Group Buys.https://bitcointalk.org/ind…
|
n/a | sidehack | September 25, 2016, 05:07:41 PM |
|
|
|
5V/12V Molex adapter board, PCIe 6-pin input, 20A capable (GPU rigs and such) Computer hardware
I have designed and successfully prototyped a small board which takes in 12V fro…
|
n/a | sidehack | September 25, 2016, 05:05:00 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
I'll have a GB/Sales thread up in the next few days. Probably use USPS Small fla…
|
n/a | sidehack | September 23, 2016, 04:06:25 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
I'm gonna go ahead and say one board with three 18" cables is $20. Sheathing cur…
|
n/a | sidehack | September 23, 2016, 03:31:13 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
The standard cable as I've done it so far has a single Molex. If your riser has…
|
n/a | sidehack | September 23, 2016, 02:15:47 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
I'm hoping to offer "package deals" like you're asking, Kilo. I don't have a goo…
|
n/a | sidehack | September 23, 2016, 01:23:39 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Little farther off topic than ideal right now.
|
n/a | sidehack | September 23, 2016, 12:28:40 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Right, but overclocking shouldn't wreck the power wiring if the power wiring doe…
|
n/a | sidehack | September 22, 2016, 09:40:38 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Sounds like crap power wiring to me.
|
n/a | sidehack | September 22, 2016, 09:19:00 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
I'm really hoping I'll be able to build some for you, but right now I'm waiting…
|
n/a | sidehack | September 22, 2016, 04:57:58 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
I double-checked mine and it's only 1 s5 that's the style you're looking for. Ar…
|
n/a | sidehack | September 22, 2016, 04:39:44 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
Dunno. What do you want for them, shipped slow-boat to MO 65401?
|
n/a | sidehack | September 22, 2016, 02:03:05 PM |
|
|
|
Bitmain New Miner S7-LN 2.7T @697W discussion (Not official) Hardware
GayEddie mining for tits. No offense meant but that's pretty funny stuff.
|
n/a | sidehack | September 22, 2016, 01:17:29 PM |
|
|
|
[FS] GS Server PSUs, boards & kits, custom cables, GPU riser power, made in USA Computer hardware
Depends on length and what terminations you want, and to some extent quantity. W…
|
n/a | sidehack | September 22, 2016, 12:48:18 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
I probably should finish out some of the at this point comically outdated pod pr…
|
n/a | sidehack | September 22, 2016, 12:18:44 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
https://bitcointalk.org/index.php?topic=940317.0A complete (and updated just thi…
|
n/a | sidehack | September 22, 2016, 11:52:14 AM |
|
|
|
[FS] GS Server PSUs, boards, cables, 0.3W/GH Stick Miner, hosting, made in USA Computer hardware
Bump for some updates.I have pared down some of the inactive items, notably the…
|
n/a | sidehack | September 22, 2016, 11:50:33 AM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
MarkAz has had his order of test boards and cables for about a week now, and I'v…
|
n/a | sidehack | September 22, 2016, 10:57:29 AM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
Honestly, I'd be interested in the whole S5 machine in the OEM package. I might…
|
n/a | sidehack | September 21, 2016, 09:25:45 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
I'm looking to buy about half a dozen S5 miners.I'm not too concerned if they wo…
|
n/a | sidehack | September 21, 2016, 07:31:13 PM |
|
|
|
WTB six S5 miners, doesn't matter if they work Computer hardware
Nope, not at all. I might be interested in S5+ hardware for the museum but right…
|
n/a | sidehack | September 21, 2016, 08:40:58 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
(I am the manufacturer)
|
n/a | sidehack | September 21, 2016, 05:52:43 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
If the chip warms up but the LED never flashes white, I'd consider that it is ha…
|
n/a | sidehack | September 21, 2016, 04:13:29 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
That looks like a first-batch version and I would guess it was run very hot for…
|
n/a | sidehack | September 21, 2016, 02:52:10 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
That looks handy as heck. The worst problem with low-voltage stability on these…
|
n/a | sidehack | September 20, 2016, 06:57:13 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Yeah, a lot of the stock S7s I saw were pulling 1400W for 4.73TH off 208V which…
|
n/a | sidehack | September 19, 2016, 02:46:17 PM |
|
|
|
Community Miner Design Discussion Hardware
I've pulled close to 15W out of USB for jacked-up Compacs before, moderate airfl…
|
n/a | sidehack | September 19, 2016, 02:42:16 PM |
|
|
|
Community Miner Design Discussion Hardware
Truth be told, I haven't signed anything with anyone at all. But at the same tim…
|
n/a | sidehack | September 15, 2016, 06:19:39 PM |
|
|
|
Community Miner Design Discussion Hardware
If I'm under an NDA, could I correct you if you were wrong?
|
n/a | sidehack | September 15, 2016, 06:00:43 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Your error rate is higher than I'd shoot for, but 960W/4TH is a pretty good sett…
|
n/a | sidehack | September 15, 2016, 01:49:19 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I've got a copy of that also.
|
n/a | sidehack | September 15, 2016, 10:46:45 AM |
|
|
|
Community Miner Design Discussion Hardware
If I ever get to production, I'm thinking of offering a "core exchange" kind of…
|
n/a | sidehack | September 15, 2016, 10:26:18 AM |
|
|
|
Which USB Stick ASIC miner should I buy as on today in India. Hardware
Not sure what you mean by "get burnt" - if you mean the thing overheats and fail…
|
n/a | sidehack | September 15, 2016, 09:45:40 AM |
|
|
|
Community Miner Design Discussion Hardware
Between my own, and yours, and stuff I've picked up from others, I have about 50…
|
n/a | sidehack | September 15, 2016, 09:25:07 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
I'm all for extending the warranty, but raising the price is foolish. Their marg…
|
n/a | sidehack | September 15, 2016, 09:05:29 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Prices will come down as soon as there's no longer a monopoly on SHA gear. At le…
|
n/a | sidehack | September 15, 2016, 08:58:17 AM |
|
|
|
Community Miner Design Discussion Hardware
Actually you know what, I went and got this mixed up with a different project so…
|
n/a | sidehack | September 15, 2016, 08:16:54 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
No, I just honestly don't know. It depends on a lot of factors I can't control.…
|
n/a | sidehack | September 15, 2016, 08:10:59 AM |
|
|
|
Community Miner Design Discussion Hardware
Like I said at the start, it wasn't my project; I was to be hired for design wor…
|
n/a | sidehack | September 14, 2016, 10:31:16 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Not a question I can answer even if I wanted to.
|
n/a | sidehack | September 14, 2016, 08:53:02 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
If I actively took on that many projects at one time, I would come home one day…
|
n/a | sidehack | September 14, 2016, 07:58:32 AM |
|
|
|
Community Miner Design Discussion Hardware
It looks an awful lot like it's fallen through.
|
n/a | sidehack | September 14, 2016, 07:54:23 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
What I'm working on right now has a manual master adjustment which means every p…
|
n/a | sidehack | September 13, 2016, 08:36:29 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Redesigned Dell 750W board, mostly done, reversion prototype neededRedesigned DP…
|
n/a | sidehack | September 13, 2016, 05:32:30 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
I think this question has already been asked about 113 times in this thread, whi…
|
n/a | sidehack | September 13, 2016, 04:11:23 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
FIAT (that I honestly do not know what else to do with)Boy I wish I had that pro…
|
n/a | sidehack | September 13, 2016, 04:09:59 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
But if you sell the hub and PSU, what are you gonna do when a newer better stick…
|
n/a | sidehack | September 12, 2016, 08:20:41 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Did you miss the part where all accepted shares were to kano?
|
n/a | sidehack | September 09, 2016, 09:45:02 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Remember when they jacked up the S5 price about 20% in one day because they got…
|
n/a | sidehack | September 07, 2016, 05:36:27 PM |
|
|
|
What's a good cheap, used GPU for beginner mining? Mining (Altcoins)
Probably you should look in the Altcoin Mining forum for advice.
|
n/a | sidehack | September 07, 2016, 09:53:26 AM |
|
|
|
Electrical company keeps checking my box! WTF!!!! SOS plz HELP! Hardware
Definitely make sure you talk to the right person at the electric company, someo…
|
n/a | sidehack | September 06, 2016, 12:48:16 PM |
|
|
|
Electrical company keeps checking my box! WTF!!!! SOS plz HELP! Hardware
I'm surprised nobody's ever come around asking at my shop in the last two years…
|
n/a | sidehack | September 06, 2016, 11:18:08 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
A super-low-quantity batch like that would help explain the high unit cost, sinc…
|
n/a | sidehack | September 06, 2016, 09:54:00 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
it is an easy choice for a low power cost that needs to be quiet.I think what yo…
|
n/a | sidehack | September 06, 2016, 09:13:38 AM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Which is great if you don't want to be able to change anything with your cabling…
|
n/a | sidehack | September 05, 2016, 01:45:29 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Assuming the 3.3V regulator is okay with taking in 12V, and nothing else pulls f…
|
n/a | sidehack | September 05, 2016, 01:22:18 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Also do you own a bat and a video camera?
|
n/a | sidehack | September 01, 2016, 09:31:31 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Well daggum that's super handy.
|
n/a | sidehack | September 01, 2016, 06:42:13 PM |
|
|
|
Gauging interest around some custom hardware and cabling for GPU rigs Mining (Altcoins)
Testing on the Molex board looks good, so I have no qualms about manufacturing t…
|
n/a | sidehack | September 01, 2016, 02:26:46 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I did it to about half a dozen S7 (and resold most or all); my experience is pre…
|
n/a | sidehack | September 01, 2016, 02:00:45 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Everyone using cgminer-gekko faces that issue. It's a bug known since about a hu…
|
n/a | sidehack | September 01, 2016, 10:15:40 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Can't help you there, don't use wifi or Windows firewall or whichever you got th…
|
n/a | sidehack | September 01, 2016, 09:59:12 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Take it from any stock cgminer Win32 archive and copy it into the cgminer-gekko…
|
n/a | sidehack | September 01, 2016, 08:24:28 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Also I wonder if the reason the Win32 cgminer-gekko crashes is the missing zlib.…
|
n/a | sidehack | September 01, 2016, 08:01:05 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
They cost $25 new if you bought direct from the manufacturer; the majority of pu…
|
n/a | sidehack | August 31, 2016, 02:28:44 PM |
|
|
|
Bitmain New Miner S7-LN 2.7T @697W discussion (Not official) Hardware
Bitmain built in a way to adjust voltage in software but the info on it isn't re…
|
n/a | sidehack | August 31, 2016, 12:24:18 PM |
|
|
|
Bitmain New Miner S7-LN 2.7T @697W discussion (Not official) Hardware
https://bitcointalk.org/index.php?topic=1504228.0Requires a PIC programmer and w…
|
n/a | sidehack | August 31, 2016, 11:55:06 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Hey, that's interesting and I had no idea it was going on. I'll have to stary pa…
|
n/a | sidehack | August 31, 2016, 08:23:16 AM |
|
|
|
Bitmain New Miner S7-LN 2.7T @697W discussion (Not official) Hardware
You know, if you undervolted that you could shave probably another 70-100W off a…
|
n/a | sidehack | August 31, 2016, 08:17:28 AM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
I believe it's an arrangement where power is a three-way split in a shared (and…
|
n/a | sidehack | August 30, 2016, 10:43:12 PM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
ASICPuppy.com has stock
|
n/a | sidehack | August 30, 2016, 06:21:06 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Simply put, if they offered a longer warranty, they expect to lose money selling…
|
n/a | sidehack | August 30, 2016, 05:31:54 PM |
|
|
|
Bitmain's Refused From S9 Warranty, Last Worst Mining Company, Don't Order S9 Hardware
I've seen probably 30-40 S7 come through, plus 15 S7, with one dead board, and t…
|
n/a | sidehack | August 30, 2016, 02:10:02 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Unless the cables are sturdy enough for splitters, which if they're 18AWG on the…
|
n/a | sidehack | August 29, 2016, 11:19:47 PM |
|
|
|
Bitmain Announces the Antminer R4 and APW5 Power Supply, Designed for Silence Hardware
Yeah, a wider node is better for stability since differences in voltage based on…
|
n/a | sidehack | August 29, 2016, 06:47:31 PM |
Jump to: