| Content | Score | Started by | Date posted | ||
 |
 |
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Yeah, 620 is a good setpoint. Assuming mine is a representative sample, the grou…
|
n/a | sidehack | June 18, 2016, 11:49:42 AM |
|
|
|
Cheap and simple repair of S7 hash board Mining support
This fix does not apply to S7 Batch 1 boards, since it deals with the board's vo…
|
n/a | sidehack | June 18, 2016, 11:41:14 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Who knows, there might be an all-software option ironed out by then. I did get a…
|
n/a | sidehack | June 18, 2016, 11:08:47 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Oh, you know it is. And they'll probably continue to ignore the cgminer open-sou…
|
n/a | sidehack | June 18, 2016, 10:06:38 AM |
|
|
|
S7 controller has nine 18- pin jacks So what can we do with it? Hardware
Can you test if it's the IO board or the BeagleBoner itself that is messed up? I…
|
n/a | sidehack | June 18, 2016, 09:30:40 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Yep, another good reason to not use an online wallet. For the record I do have a…
|
n/a | sidehack | June 18, 2016, 09:05:21 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Right. I'll spend a bit of time trying to track down the command to TX that info…
|
n/a | sidehack | June 17, 2016, 02:29:37 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
So I just put that firmware on a stock S7. I didn't probe the I2C lines but meas…
|
n/a | sidehack | June 17, 2016, 01:50:34 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Not sure if I'm doing something wrong, but I'm getting nothing out of /var/log i…
|
n/a | sidehack | June 17, 2016, 01:33:00 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Say, possibly dumb question. Where's the kernel log on these?
|
n/a | sidehack | June 17, 2016, 01:28:25 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Given that's the same number I've seen everywhere else, and have seen several di…
|
n/a | sidehack | June 17, 2016, 07:43:00 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Not unexpected. What's the voltage setting given in the cgminer.conf for that on…
|
n/a | sidehack | June 17, 2016, 07:13:52 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
You mean Beanie, from the Abyss? Nicely done.
|
n/a | sidehack | June 16, 2016, 09:00:21 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Did someone say drowning puppies?Oh, wait. Never mind. Carry on.
|
n/a | sidehack | June 16, 2016, 08:48:29 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
We've reached quorum for the second set, so I'll be placing that order as soon a…
|
n/a | sidehack | June 16, 2016, 05:02:54 PM |
|
|
|
Cheap board for beginner Hardware
The S3 is probably the best miner made by anyone yet. Those things were solidly…
|
n/a | sidehack | June 16, 2016, 02:31:05 PM |
|
|
|
Cheap board for beginner Hardware
Have you seen what I've done with S7LN, running 2TH at about 400W at 20% fan spe…
|
n/a | sidehack | June 16, 2016, 02:24:38 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
The thermometer on my workbench right now is reading 96F. Oh, just jumped to 97F…
|
n/a | sidehack | June 16, 2016, 02:21:29 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
And it looks like, due to heat and errors, a lot of the 14TH machines won't actu…
|
n/a | sidehack | June 16, 2016, 02:05:00 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
The jump in price works against B1 buyers just as much as it works for them, sin…
|
n/a | sidehack | June 16, 2016, 01:54:28 PM |
|
|
|
Cheap board for beginner Hardware
S5s are okay if you don't mind something FREAKING LOUD. I guess if you undercloc…
|
n/a | sidehack | June 16, 2016, 01:50:14 PM |
|
|
|
PSUs and Transistor Switches Hardware
It's definitely overkill for what you're doing, but yes it should work. The thin…
|
n/a | sidehack | June 16, 2016, 01:39:22 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
Don't forget, all transactions need to be accompanied with a signed message to v…
|
n/a | sidehack | June 16, 2016, 12:08:18 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
Coin's way up, so let's say 0.57 right now.
|
n/a | sidehack | June 16, 2016, 11:31:39 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
That works for me, if you two want to iron out the details. I was thinking of us…
|
n/a | sidehack | June 16, 2016, 11:23:02 AM |
|
|
|
PSUs and Transistor Switches Hardware
The current draw should be on the order of milliamps, and no more than 5VDC. Pre…
|
n/a | sidehack | June 16, 2016, 10:24:20 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Some of the transactions I sent out yesterday hadn't even shown up on Blockchain…
|
n/a | sidehack | June 16, 2016, 08:49:23 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
When they realized that their miners weren't hitting 14TH reliable they probably…
|
n/a | sidehack | June 16, 2016, 08:46:32 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
I have at least one wallet client open at all times. Additionally, and this is m…
|
n/a | sidehack | June 16, 2016, 02:14:21 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Seriously though, whatever happened to upping the block size limit? Wasn't that…
|
n/a | sidehack | June 15, 2016, 10:46:12 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
I just wish the jackass day traders would save some transaction headroom for peo…
|
n/a | sidehack | June 15, 2016, 09:59:30 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
No, I didn't want to mess with things that much since it was a loaner. If I had…
|
n/a | sidehack | June 15, 2016, 10:31:39 PM |
|
|
|
IBM takes a leap to 7nm Hardware
The Minion was BlackArrow. Hashfast's big chip had four independent dies on one…
|
n/a | sidehack | June 15, 2016, 10:28:48 PM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
I've got some 40A 208V breakers powering 5x S7 off 2880s and dual Dell 750s in h…
|
n/a | sidehack | June 15, 2016, 10:26:31 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
Well apparently the network hates me. I scrapped the original order, put in a ne…
|
n/a | sidehack | June 15, 2016, 09:42:26 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
...or, at least I would have placed an order, if that transaction would ever con…
|
n/a | sidehack | June 15, 2016, 09:12:07 AM |
|
|
|
IBM takes a leap to 7nm Hardware
Power density becomes a big problem with large dies and requires complex or exot…
|
n/a | sidehack | June 15, 2016, 03:15:06 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
I've got an incoming transaction sent on June 6th that still hasn't confirmed, a…
|
n/a | sidehack | June 15, 2016, 03:05:43 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
The one here is in a 90F ambient. PCB temps currently 66,68,69 chip temps 97,100…
|
n/a | sidehack | June 15, 2016, 11:29:28 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
It's got some pretty decent ADCs on there. They might have it calibrate a dynami…
|
n/a | sidehack | June 15, 2016, 10:45:08 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
So they made sure to dual-FET both high and low sides of the buck switching, whi…
|
n/a | sidehack | June 15, 2016, 10:30:31 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
Probably that, or core voltage as too low. Might have had some under-spec chips…
|
n/a | sidehack | June 15, 2016, 08:29:54 AM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
I'm pretty sure the controller doesn't get power from the hashboards. The periph…
|
n/a | sidehack | June 14, 2016, 11:40:37 PM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
If you use the controller PSU to kick on the secondary, that violates Bitmain's…
|
n/a | sidehack | June 14, 2016, 11:16:39 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
I was talking about someone else.
|
n/a | sidehack | June 14, 2016, 09:26:37 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
I didn't take apart my S3, but I did hack up the block erupters, the AM Blade (t…
|
n/a | sidehack | June 14, 2016, 09:02:43 PM |
|
|
|
IBM takes a leap to 7nm Hardware
...it gets cooler? Dang, I'm in the wrong business. That's freakin' sweet.
|
n/a | sidehack | June 14, 2016, 08:54:26 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
I'd consider buying an S9LN, and then take it apart.
|
n/a | sidehack | June 14, 2016, 06:43:20 PM |
|
|
|
Pair on s-9s now running photos to come . Hardware
The one to be delivered here today looks like it was picked up late and sat for…
|
n/a | sidehack | June 14, 2016, 06:07:30 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
I've placed the first order with Bitmain for the first 6 units. I used some of t…
|
n/a | sidehack | June 14, 2016, 06:05:14 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
Yeah, but a couple of those orders have yet to identify themselves.
|
n/a | sidehack | June 14, 2016, 11:46:16 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Inbetween things today, I'll be getting some operating data from different volta…
|
n/a | sidehack | June 14, 2016, 11:28:28 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
If you don't turn the voltage down from stock, 150MHz will pull about 600mA off…
|
n/a | sidehack | June 14, 2016, 10:32:39 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
If you're looking at DC power, each blade needs around 400W and the controller a…
|
n/a | sidehack | June 14, 2016, 10:26:14 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
If you want to run it on two PSUs, there's a risk of the controller PSU shutting…
|
n/a | sidehack | June 14, 2016, 10:03:14 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Normally with a reported WU that low it'd be sending a bunch of errors, but I do…
|
n/a | sidehack | June 14, 2016, 09:53:40 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Well, at least it's accepting shares. Let it run for a few minutes then put up a…
|
n/a | sidehack | June 14, 2016, 08:26:09 AM |
|
|
|
GekkoScience Compac BM1384 Stickminer Official Support Thread Hardware
Does the green LED ever flash white?
|
n/a | sidehack | June 14, 2016, 07:46:38 AM |
|
|
|
[FS] GS Server PSUs, boards, cables, 0.3W/GH Stick Miner, hosting, made in USA Computer hardware
Sure, if you got a PicoPSU. Buying one of those that take in 12V directly and pr…
|
n/a | sidehack | June 14, 2016, 07:38:56 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I got a mostly-working S4 for free end of last year and gave it the same treatme…
|
n/a | sidehack | June 14, 2016, 07:24:26 AM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
I'm perched happily in Missouri, US where a dollar goes about 7% further than a…
|
n/a | sidehack | June 13, 2016, 08:51:11 PM |
|
|
|
IBM takes a leap to 7nm Hardware
I just did the math. Frequency times chip count times core count equals hashrate…
|
n/a | sidehack | June 13, 2016, 08:48:55 PM |
|
|
|
IBM takes a leap to 7nm Hardware
BM1380 had 8, 1382 had 64 I think, BM1384 55, BM1385 50.
|
n/a | sidehack | June 13, 2016, 08:18:28 PM |
|
|
|
IBM takes a leap to 7nm Hardware
...and then requiring about a 300A multiphase buck at probably 85% efficiency, w…
|
n/a | sidehack | June 13, 2016, 07:10:19 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Also, I've settled on terms for the group buy so that's live now.
|
n/a | sidehack | June 13, 2016, 06:55:00 PM |
|
|
|
(hacked) S7LN Group Buy Group buys
As of right now, I can get an S7LN shipped to my shop for about 0.51BTCIf I ask…
|
n/a | sidehack | June 13, 2016, 06:47:17 PM |
|
|
|
Is there a risk of damaging components if my MOBO has swollen caps? Mining (Altcoins)
If you can solder, replace the caps. I don't know how many hundred motherboards…
|
n/a | sidehack | June 13, 2016, 04:43:47 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
The problem with updating the last setpoint is, you can't change it without refl…
|
n/a | sidehack | June 13, 2016, 04:42:27 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
https://bitcointalk.org/index.php?topic=1493601.msg15180315#msg15180315Please no…
|
n/a | sidehack | June 13, 2016, 03:57:50 PM |
|
|
|
Cheap and simple repair of S7 hash board Mining support
Based on what the folks in this thread have said, it looks like the PIC never up…
|
n/a | sidehack | June 13, 2016, 02:11:05 PM |
|
|
|
Cheap and simple repair of S7 hash board Mining support
I would guess it's not a resistor in the VRM circuit, given that it appears the…
|
n/a | sidehack | June 13, 2016, 01:45:06 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
One problem with having a hot and cold setpoint are, since the hot setpoint is o…
|
n/a | sidehack | June 13, 2016, 11:49:29 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Not really. It was a "hey this works but it's 7PM and I want to go home and eat…
|
n/a | sidehack | June 13, 2016, 11:18:16 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I'm questioning the stability of the 610mV setpoint. My first extended test last…
|
n/a | sidehack | June 13, 2016, 08:51:05 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
I haven't done any extended tests, but I did determine that the hardware is capa…
|
n/a | sidehack | June 13, 2016, 01:21:17 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Yes, if you were into that sort of thing. Stock on the S7LN is about 670mV, but…
|
n/a | sidehack | June 13, 2016, 01:07:38 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
It looks like my 640/610 profile is just fine for 400MHz, delivering 1.8TH at 34…
|
n/a | sidehack | June 13, 2016, 01:00:59 AM |
|
|
|
(hacked) S7LN Group Buy Group buys
Of course, it may be just as easy for someone to just buy one and have it shippe…
|
n/a | sidehack | June 12, 2016, 11:38:06 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Well, looks like we got 5 for a group buy. I'll take that over to the right sect…
|
n/a | sidehack | June 12, 2016, 09:44:52 PM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
Glad I'm not the only one thought it was high. My 400A 3-phase run, 100 feet fro…
|
n/a | sidehack | June 12, 2016, 09:33:50 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
When I was bench-testing I only had 2 cables plugged into the board.Here at the…
|
n/a | sidehack | June 12, 2016, 08:07:05 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I don't actually own a Kill-A-Watt and none of the stores I looked at in town ap…
|
n/a | sidehack | June 12, 2016, 06:53:03 PM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
halvingthe exact reason
|
n/a | sidehack | June 12, 2016, 02:54:38 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I would guess any regulated-string S7 variant would be improvable.I would also g…
|
n/a | sidehack | June 12, 2016, 02:53:22 PM |
|
|
|
IBM takes a leap to 7nm Hardware
And how long between when the first foundry announcements of "16nm is possible"…
|
n/a | sidehack | June 12, 2016, 02:42:59 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Well the one blade's been running solid at 620mV (9.3V, down from 10.0V stock) a…
|
n/a | sidehack | June 12, 2016, 10:17:21 AM |
|
|
|
Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order Hardware
If that's the one headed to my place, it's good information to know. I'll see ab…
|
n/a | sidehack | June 12, 2016, 08:59:40 AM |
|
|
|
Is BITMAIN a trusted source for purchasing mining equipment? Hardware
What, really? It could get, and has frequently gotten, a lot more racist around…
|
n/a | sidehack | June 12, 2016, 12:09:44 AM |
|
|
|
Bitmain New Miner S7-LN 2.7T @697W discussion (Not official) Hardware
The inside of mine was fairly clean by my standards - nothing caked up, but some…
|
n/a | sidehack | June 11, 2016, 08:57:09 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Tentative success!I was running into no end of trouble getting anything except d…
|
n/a | sidehack | June 11, 2016, 07:21:26 PM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
16A would be a good margin for powering on 120V. Bitmain also recommends their 1…
|
n/a | sidehack | June 11, 2016, 02:19:50 PM |
|
|
|
Antminer S9 - How to power in Canada? Mining support
At 220V an S7 should pull under 7 amps. A 20A breaker per unit is extreme overki…
|
n/a | sidehack | June 11, 2016, 01:08:13 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
Looking through the thread, that's kinda what I was figuring too.Don't worry guy…
|
n/a | sidehack | June 11, 2016, 07:20:36 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
I figured it was there, probably part of the reason Bitmain never updated their…
|
n/a | sidehack | June 10, 2016, 11:48:52 PM |
|
|
|
Cheap and simple repair of S7 hash board Mining support
9.7V would be enough to start at about 500MHz, but certainly not stock.
|
n/a | sidehack | June 10, 2016, 11:42:30 PM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
[farnsworth]Good news, everyone![/farnsworth]So I spent the day learning how to…
|
n/a | sidehack | June 10, 2016, 04:10:07 PM |
|
|
|
Cheap board for beginner Hardware
No, it just means that two-year-old gear is too electrically inefficient to earn…
|
n/a | sidehack | June 10, 2016, 03:37:11 PM |
|
|
|
[Guide] Dogie's Comprehensive Bitmain Antminer S7 Setup [HD] Hardware
I have javascript disabled by default in my browser, manual enables only. When I…
|
n/a | sidehack | June 10, 2016, 11:27:27 AM |
|
|
|
[Guide] Dogie's Comprehensive Bitmain Antminer S7 Setup [HD] Hardware
You have javascript enabled for the webconfig?Both fans are plugged in and worki…
|
n/a | sidehack | June 10, 2016, 11:02:50 AM |
|
|
|
Hacking the S7 - improving efficiency through minor hardware manipulation Hardware
One of these days I really wanna hang out at your shop.
|
n/a | sidehack | June 09, 2016, 09:53:36 PM |
Jump to: