| Content | Score | Started by | Date posted | ||
 |
 |
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I'm experimenting with p2pool, and BTCMiner works fine there, except for these e…
|
n/a | ztex | February 07, 2012, 02:36:15 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I'm experimenting with p2pool, and BTCMiner works fine there, except for these e…
|
n/a | ztex | February 07, 2012, 01:38:08 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I am getting the clocking down to 0mhz is there a fix for this. It is happening…
|
n/a | ztex | February 07, 2012, 01:29:45 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I ran a few tests yesterday and sent ztex the results. It seems that when I run…
|
n/a | ztex | February 06, 2012, 03:57:55 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
Code:ztex_ufm1_15d3-04A32E00E9: Using LongPolling URL http://api2.bitcoin.cz:833…
|
n/a | ztex | February 06, 2012, 04:44:09 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I have received my first FPGA Board and I am running ZtexBTCMiner-120130 with D3…
|
n/a | ztex | February 06, 2012, 03:24:40 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I too had similar "countdown to death" experiences yesterday with a new 1.15x an…
|
n/a | ztex | February 06, 2012, 03:32:13 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I am running the latest stable version pointed at P2Pool. After a few hours of…
|
n/a | ztex | February 02, 2012, 01:15:13 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
Yep, mine is running at 216 MHz... It's really cool too... I wonder why? Why doe…
|
n/a | ztex | February 02, 2012, 01:23:11 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
That is not true. -N3 has the same fabric speed as -2 -- check ISE 13.3+ 'speedp…
|
n/a | ztex | February 02, 2012, 01:09:51 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
A testing release of BTCMiner has been published: http://www.ztex.de/btcminer/Zt…
|
n/a | ztex | January 30, 2012, 08:09:43 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
A testing release has been published: http://www.ztex.de/btcminer/ZtexBTCMiner-1…
|
n/a | ztex | January 30, 2012, 08:16:36 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Although it might not be more than a coincidence, I can tell you that mining wit…
|
n/a | ztex | January 30, 2012, 06:03:31 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I'm assuming that in the December firmware, the PLL denominator, which divides t…
|
n/a | ztex | January 28, 2012, 04:55:41 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
No, this new version really doesn't work. It tries and tries, gradually reducing…
|
n/a | ztex | January 28, 2012, 04:51:44 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I think that might be it. It runs stable with the d1 firmware so I am sticking…
|
n/a | ztex | January 27, 2012, 07:08:24 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I got that problem too. I tested the new firmware on two boards and it will do…
|
n/a | ztex | January 27, 2012, 05:27:24 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
FPGA damage is the most realistic thing in my eyes. The rest is working. I did n…
|
n/a | ztex | January 27, 2012, 03:19:32 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I just looked at the screen output, the number on the far right side. And yes, I…
|
n/a | ztex | January 27, 2012, 02:12:57 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
I did use the pads first but i ran into the same problems. 1.15d1 won't help. I…
|
n/a | ztex | January 27, 2012, 02:04:35 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Will do, but right now I'm at work, so by the time I can send them, it'll be [ea…
|
n/a | ztex | January 27, 2012, 01:50:02 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I tried it this morning, pointing it at deepbit.net (just like I was doing with…
|
n/a | ztex | January 27, 2012, 01:19:12 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 200+ MH/s on LX150 Mining software (miners)
Both heatsink have been mounted with the same glue. One is working at 204 MHz th…
|
n/a | ztex | January 27, 2012, 12:22:31 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I don't have experience with hardware. Does this mean that one could get all the…
|
n/a | ztex | January 27, 2012, 11:35:52 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
I couldn't run the boards at the USB3.0 port. Got an error when i tried to uploa…
|
n/a | ztex | January 26, 2012, 09:09:42 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
A new software release has been published (release 120126, download from http://…
|
n/a | ztex | January 26, 2012, 05:14:57 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
From what we know his OS should not detect the device any differently on either…
|
n/a | ztex | January 26, 2012, 04:24:47 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
The only catch is that usb type b 'plugs', i.e.,usb 3 mini b and usb 3 micro b w…
|
n/a | ztex | January 26, 2012, 03:44:22 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
Is it possible that my new boards don't like their USB3 ports ? I don't underst…
|
n/a | ztex | January 26, 2012, 02:46:38 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
It is certainly much, much faster to configure. It seems to work fine without su…
|
n/a | ztex | January 26, 2012, 12:06:35 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
Sudo'ing BTCMiner uploads the bitstream and runs the miner just fine... what am…
|
n/a | ztex | January 26, 2012, 11:31:34 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
i hope this does not affect 1.15d boards... Why are they slower ? Different sp…
|
n/a | ztex | January 26, 2012, 04:10:53 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
Now, I'm using release 111214 but as soon as it tries 200MHz the error rate goes…
|
n/a | ztex | January 24, 2012, 02:59:02 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
That may be the reason for more rejects. 1% is not bad but with LP it will get e…
|
n/a | ztex | January 13, 2012, 10:13:40 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Has anyone pointed their 1.15x(s) at P2Pool yet? Should it work or is the curre…
|
n/a | ztex | January 13, 2012, 05:00:44 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
And a Bitcoin sASIC only takes some tens of thousands to kick off.Including one…
|
n/a | ztex | January 11, 2012, 01:26:34 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
I think they have plans for developing a custom BTC mining ASIC. Who is "they"?
|
n/a | ztex | January 11, 2012, 10:31:37 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Are you planning sommething with more Spartans 6 ?Multi-FPGA solutions are not m…
|
n/a | ztex | January 11, 2012, 10:26:46 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
Just a few notes:1. The pad delivered with the cooler not optimal (but sufficien…
|
n/a | ztex | January 03, 2012, 03:10:37 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 200 MH/s FPGA Board now on stock Hardware
A new version of BTCMiner with improved performance (now typically 200 MH/s) has…
|
n/a | ztex | December 14, 2011, 07:29:34 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 200 MH/s on LX150 Mining software (miners)
A new version of BTCMiner with improved performance (typically 200 MH/s on LX150…
|
n/a | ztex | December 14, 2011, 07:22:13 AM |
|
|
|
[1100 GH] BTC Guild - Pure PPS Merged Mining, LP, SSL, Instant Payout Pools
Reject rate is higher than GPUs (Hard to compete with < 0.1%), but even so the s…
|
n/a | ztex | December 12, 2011, 04:13:01 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Thanks for your explanations. So the number of submitted shares in time x define…
|
n/a | ztex | December 10, 2011, 06:55:16 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
After running and observing the board for a while i have some questions. From ti…
|
n/a | ztex | December 10, 2011, 04:34:13 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
ztex, if I were you I'd replace the first board for two reasons:I already wrote…
|
n/a | ztex | December 06, 2011, 12:55:32 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
was told 12v is safe.12V is save.QuoteHis power supply unit states output is 12v…
|
n/a | ztex | December 06, 2011, 11:47:41 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I only had the bad luck to use a power supply with (maybe) slightly unregulated…
|
n/a | ztex | December 06, 2011, 11:37:26 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
The design has no protection (fact), and will burn with any overvoltage (fact).C…
|
n/a | ztex | December 05, 2011, 08:14:20 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
That's right, anyway you did not mentioned "switching" when I asked you first. Y…
|
n/a | ztex | December 05, 2011, 07:02:02 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I wrote "switching power supplies are stabilized".QuoteIf you search on ebay, yo…
|
n/a | ztex | December 05, 2011, 06:00:54 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I reworked the Power supply selection guide again.I think if I write "The peak v…
|
n/a | ztex | December 05, 2011, 05:29:37 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
"Universal power supplies (the ones with switchable output voltage) from the sup…
|
n/a | ztex | December 05, 2011, 04:10:03 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
A Power supply selection guide which should help to find a suitable power supply…
|
n/a | ztex | December 05, 2011, 03:01:52 PM |
|
|
|
Custom FPGA Mining Board: X6000/X6500 Hardware
By the way, I did some calculations of the cost/performance comparison to the zt…
|
n/a | ztex | December 02, 2011, 08:57:20 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
QuoteTo me, the dangerous thing is that charged up output capacitor. If that is…
|
n/a | ztex | December 02, 2011, 08:15:46 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
Second, it either has an output capacitor and the ratio of the peak to average v…
|
n/a | ztex | December 02, 2011, 04:30:50 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
This calculation only applies to an ideal full-wave rectifier. With filtering it…
|
n/a | ztex | December 02, 2011, 04:17:09 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
What power supply was used, anyway? Brand/model #?According to Gusti, this thin…
|
n/a | ztex | December 01, 2011, 08:04:39 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
Sure, all is perfect designed and tested on your side, and the customer (me) is…
|
n/a | ztex | December 01, 2011, 04:07:41 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Is it possible that Gustie tries to get this thread locked?
|
n/a | ztex | December 01, 2011, 03:49:09 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Cisco have decades of superb design and customer service. Your company sells boa…
|
n/a | ztex | December 01, 2011, 03:46:32 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I can think of shorting something at the back of the board by stray screw laying…
|
n/a | ztex | December 01, 2011, 01:04:45 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
From this statement, I may assume that the overvoltage protection of your boards…
|
n/a | ztex | December 01, 2011, 12:52:36 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
Yeah I agree selling kits would be worthless. If power supplies are offered the…
|
n/a | ztex | December 01, 2011, 12:32:40 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
Like I said in the other thread (now locked), that's the voltage when there is n…
|
n/a | ztex | December 01, 2011, 12:29:32 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
3COM switch is rated from 6 to 16 vdc (if I remember correctly, I don´t have it…
|
n/a | ztex | December 01, 2011, 12:07:43 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
How much would you charge, Ztex, to replace just that regulator?If on overvoltag…
|
n/a | ztex | December 01, 2011, 12:03:41 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
But the PS is rated 12 VDC 1000 ma, and the further measures confirm that (11.3…
|
n/a | ztex | December 01, 2011, 11:37:18 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Please explain you first why my PS is currently working with original switch. I…
|
n/a | ztex | December 01, 2011, 09:54:21 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Yes, please you continue lying and publish fake emails and headers. Shall I publ…
|
n/a | ztex | December 01, 2011, 09:22:48 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
QuoteThe "smoke" issue is a plain lie from manufacturer, I NEVER wrote that emai…
|
n/a | ztex | December 01, 2011, 08:56:37 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
QuoteYou also reported that the "working" power supply was pushing 13.5V. AFAIR…
|
n/a | ztex | December 01, 2011, 09:16:33 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
If I was ztex, I might consider giving you a 50% rebate on the first board (and…
|
n/a | ztex | December 01, 2011, 09:03:15 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Now you are plainly lying, I NEVER wrote such email to you. I can publish the h…
|
n/a | ztex | December 01, 2011, 08:47:24 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
... or you cannot sell anymore.please also stop that threats.
|
n/a | ztex | December 01, 2011, 08:17:40 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Sure, I want to be sure that every possible customer here knows beforehand that…
|
n/a | ztex | December 01, 2011, 08:12:20 AM |
|
|
|
[SCAM ALERT] ZTEX USB-FPGA Module : Warranty is non-existent CPU/GPU Bitcoin mining hardware
Here is ztex. I'm producing FPGA Boards, see http://www.ztex.de. I also develope…
|
n/a | ztex | December 01, 2011, 04:50:28 AM |
|
|
|
[SCAM ALERT] ZTEX USB-FPGA Module : Warranty is non-existent CPU/GPU Bitcoin mining hardware
I don't get it, didn't he say he measured 13.5 V open circuit on the regulator?…
|
n/a | ztex | December 01, 2011, 07:12:21 AM |
|
|
|
[SCAM ALERT] ZTEX USB-FPGA Module : Warranty is non-existent CPU/GPU Bitcoin mining hardware
Cisco, pricey but rock solid. Never saw a router blow itself as this ZTEX FPGA b…
|
n/a | ztex | December 01, 2011, 05:11:17 AM |
|
|
|
[SCAM ALERT] ZTEX USB-FPGA Module : Warranty is non-existent CPU/GPU Bitcoin mining hardware
I know this wont make you feel any better, but those volt regs can be replaced.…
|
n/a | ztex | December 01, 2011, 05:19:52 AM |
|
|
|
[SCAM ALERT] ZTEX USB-FPGA Module : Warranty is non-existent CPU/GPU Bitcoin mining hardware
Last October 21st I ordered 2 x ZTEX USB-FPGA Module 1.15x from manufacturer, th…
|
n/a | ztex | December 01, 2011, 04:55:05 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I highly recommend not buying anything from this vendor, their warranty is non-e…
|
n/a | ztex | December 01, 2011, 04:46:57 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
I highly recommend not buying anything from this vendor, his warranty is inexist…
|
n/a | ztex | December 01, 2011, 04:45:22 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Thanks for clarification. It is as you said. The thermal pad is sh!t !!! . Plea…
|
n/a | ztex | November 29, 2011, 03:10:51 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Edit: Here is a screen when i start the miner. Why does it set the initial frequ…
|
n/a | ztex | November 28, 2011, 07:16:59 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
I went with the thermal pad that came with the heatsink.I never tried out this t…
|
n/a | ztex | November 26, 2011, 04:10:42 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Your's sounds more what I would expect from the latest production he has out. I…
|
n/a | ztex | November 26, 2011, 03:51:09 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
If I understand his software correctly, it automaticly adjusts the freq up/down…
|
n/a | ztex | November 26, 2011, 03:42:03 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
I have an extra 92mm fan blowing at the board. Your right about self adjustment.…
|
n/a | ztex | November 26, 2011, 03:25:04 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
How much does the bump from 1.23V to 1.25V raise effective hashing rate.Typical…
|
n/a | ztex | November 25, 2011, 02:28:23 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
I plan to test it with 1.3V. But currently I have no suitable resistor values ly…
|
n/a | ztex | November 25, 2011, 09:28:33 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Just out of curiosity what is the command structure for using backup pools, Is i…
|
n/a | ztex | November 14, 2011, 01:52:57 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Is there a way to setup a way to setup a backup pool with BTCMiner?A new release…
|
n/a | ztex | November 14, 2011, 12:41:14 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Is there a way to setup a way to setup a backup pool with BTCMiner?A new release…
|
n/a | ztex | November 14, 2011, 09:20:18 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
I just wondering about USB bus throughput.Does miner send every datablock for sh…
|
n/a | ztex | November 13, 2011, 04:53:02 AM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
Why would 15x 4-FPGA boards cost more than 60x 1-FPGA boards if 1x 4-FPGA board…
|
n/a | ztex | November 11, 2011, 04:59:10 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Any plan to test R13 with a 2k Ohm? Maybe just a 2k1 to be safer first. Pust it…
|
n/a | ztex | November 11, 2011, 04:31:59 PM |
|
|
|
ZTEX USB-FPGA Module 1.15x: 190 MH/s FPGA Board now on stock Hardware
ztek could you build a 2x FPGA, 3x FPGA or even 4x FPGA board cheaper on a per F…
|
n/a | ztex | November 11, 2011, 04:22:53 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
I noticed on the printed board it reads 1k2 for R12 but there is a 1k3 resisto…
|
n/a | ztex | November 11, 2011, 09:12:39 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, now 190 MH/s on LX150 Mining software (miners)
Would like to know the amp draw as well. If it is the same it would be 8.78 wat…
|
n/a | ztex | November 08, 2011, 05:10:38 PM |
Jump to: