| Content | Score | Started by | Date posted | ||
 |
 |
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Not worth it. Used 1.15y's (and a few remaining ones that are sold-off in the sh…
|
n/a | ztex | December 03, 2013, 06:51:41 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Hehe, zTex strikes back!? What would these deliver 400MH/s?You may not believe i…
|
n/a | ztex | December 03, 2013, 06:47:03 AM |
|
|
|
"Efficient Bitcoin Miner System Implemented on Zynq SoC" Hardware
Here is an interesting article about an "Efficient Bitcoin Miner System Implemen…
|
n/a | ztex | July 25, 2013, 02:01:39 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
I think the board is faulty though, I couldn't get it to even made the LEDs come…
|
n/a | ztex | July 25, 2013, 01:56:51 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Some strange things are happening:Code:008-0: ztex_ufm1_15y1-04A39E1212-1: f=220…
|
n/a | ztex | July 25, 2013, 01:47:50 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
I can confirm that an FPGA Board with the MAC address "0004a36dd5f2" was not pro…
|
n/a | ztex | June 25, 2013, 04:38:09 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
100% Hardware errors.All others run at 220 and 216 straight. Other chip is decla…
|
n/a | ztex | June 18, 2013, 03:52:56 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Yes, the version 2 of the board, is it sensing the die temperature? The board te…
|
n/a | ztex | June 18, 2013, 03:23:33 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
100% Hardware errors.All others run at 220 and 216 straight. Other chip is decla…
|
n/a | ztex | June 18, 2013, 03:23:09 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 MH/s and 860 MH/s FPGA BoardZTEX USB-…
|
n/a | ztex | October 20, 2011, 02:19:47 PM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
hi all, i have 5 x 1.15y boards. i tested all boards one by one and they work. w…
|
n/a | ztex | April 26, 2013, 04:29:57 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Estimated lead time is 8-12 weeks.Even for PBC only option? or are those ready…
|
n/a | ztex | April 26, 2013, 04:12:44 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Just an update about availability.Since a few weeks there is a large interest in…
|
n/a | ztex | April 22, 2013, 08:51:59 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Yes, it is removed from the store for unknown time Both kinds of FPGA boards ar…
|
n/a | ztex | April 09, 2013, 05:46:24 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
are you still selling singles? because in the ztex webpage they don't show when…
|
n/a | ztex | April 05, 2013, 03:17:58 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Im getting the "capability missing: 0 7" and "pin does not go HIGH" problem on m…
|
n/a | ztex | February 25, 2013, 03:43:10 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Yeah, word! Would be great if ztex and grobi42 could continue their great work w…
|
n/a | ztex | January 07, 2013, 09:00:21 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
ztex any plans for stratum for BTCMiner?The bandwidth requirement of your ZTEX c…
|
n/a | ztex | December 07, 2012, 06:53:39 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
A new BTCMiner release is available, see https://bitcointalk.org/index.php?topic…
|
n/a | ztex | November 26, 2012, 08:07:26 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
A version has been released at http://www.ztex.de/btcminer.Binaries: http://www.…
|
n/a | ztex | November 26, 2012, 08:04:09 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Hi, my BTCMiner+HTTP branch is now in sync with latest BTCMiner Version 121116.h…
|
n/a | ztex | November 26, 2012, 07:50:54 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
A new BTCMiner release is available, see https://bitcointalk.org/index.php?topic…
|
n/a | ztex | November 16, 2012, 10:07:08 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
A version has been released on http://www.ztex.de/btcminer.Binaries: http://www.…
|
n/a | ztex | November 16, 2012, 10:04:19 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
I've just tried enabling target checking (-tc) on the latest version. I am minin…
|
n/a | ztex | November 16, 2012, 03:35:52 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Hm, this happened, restarted everything seems fine...Code:Warning (try 1): Numer…
|
n/a | ztex | October 30, 2012, 06:59:58 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
What is target checking good for? I'll have to try it this night See https://en.…
|
n/a | ztex | October 19, 2012, 03:03:01 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Total hash rate: 3398,6 MH/sTotal submitted hash rate: 3418,7 MH/s --------works…
|
n/a | ztex | October 19, 2012, 02:53:48 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
The test version runs fine here. Any plans for new products in the ASIC directio…
|
n/a | ztex | October 18, 2012, 03:31:22 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Thx for the hint ztex.Today i`ll put a sticker on every board with a serial.But…
|
n/a | ztex | October 18, 2012, 03:42:52 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
There where several news within the last weeks:A new revision of USB-FPGA Module…
|
n/a | ztex | October 17, 2012, 10:24:46 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
A new testing version has been released.Binaries: http://www.ztex.de/btcminer/Zt…
|
n/a | ztex | October 17, 2012, 09:20:51 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
By the way... any chance to see Stratum soon in BTCMiner? See https://bitcointal…
|
n/a | ztex | October 17, 2012, 09:14:55 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Any1 can help find that little non working chip??Code:(Re)Scanning bus ... 0 new…
|
n/a | ztex | October 17, 2012, 08:02:26 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
I use a seasonix AX850, yup I havel also tried a different powersource, same res…
|
n/a | ztex | October 04, 2012, 03:42:15 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
ztex any plans for stratum for BTCMiner?The bandwidth requirement of your ZTEX c…
|
n/a | ztex | October 04, 2012, 03:28:49 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Help me please ztex. My 1.15x was working perfectly running stable at 212 mh whe…
|
n/a | ztex | October 01, 2012, 03:38:46 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
My fpgas has really been humming along nice. But now I got this:ztex_ufm1_15y1-0…
|
n/a | ztex | October 01, 2012, 03:35:06 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Check the PSU. They often die slowly / become unstable over time if they run per…
|
n/a | ztex | October 01, 2012, 03:24:42 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
If Inaba means that BTCminer does not support difficulty >1 checking he is right…
|
n/a | ztex | October 01, 2012, 03:10:59 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Looks to me like that software does not support > difficulty 1 shares. Thats hi…
|
n/a | ztex | September 26, 2012, 06:59:48 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Code:ztex_ufm1_15y1-04A36E24F2-4: Set frequency to 200,00MHzbus-0-0: ztex_ufm1_1…
|
n/a | ztex | September 26, 2012, 06:52:33 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Code:bus-0-0: ztex_ufm1_15y1-04A34644C6-3: Warning: Rejected block: high-hashbus…
|
n/a | ztex | September 24, 2012, 02:20:11 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
LED1 blinking :/I broke something Usually indicates an overload / shortcut. But…
|
n/a | ztex | September 10, 2012, 04:35:02 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
I plugged into the 12V line from the PSU, started normally, but then flashed a s…
|
n/a | ztex | September 07, 2012, 03:46:57 PM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Code:Warning (try 1): error sending control message: Broken pipeAny idea what is…
|
n/a | ztex | August 23, 2012, 06:10:00 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
I'm having issues running a cluster of 16 Ztex 1.15x boards with CGMiner or BFGM…
|
n/a | ztex | August 16, 2012, 08:02:17 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Hi Ztex: Is it possible to let the Quad boards flash when a nounce is found? He…
|
n/a | ztex | August 13, 2012, 03:47:48 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Quote(1) I would like to get some recommended part numbers for low profile heats…
|
n/a | ztex | August 09, 2012, 03:37:36 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
I've added some nice feature to BTCMiner. Most wanted feature by myself: a built…
|
n/a | ztex | August 02, 2012, 02:38:25 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Edit: Clarified my question. I'd like to know if the rest of the cluster is basi…
|
n/a | ztex | August 02, 2012, 02:33:17 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Hi i was wondering i you could add a line to the output of BTCMiner. I would rea…
|
n/a | ztex | July 25, 2012, 03:44:11 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Totally stupid question about the miner: Does it change the Mhz also upwards? I…
|
n/a | ztex | July 23, 2012, 03:09:15 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
What happens if there is a faulty USB cable in a 100 board cluster and the board…
|
n/a | ztex | July 20, 2012, 04:06:43 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Yes, again I know (having written my own pool) but if the longpoll doesen't trig…
|
n/a | ztex | July 20, 2012, 04:00:22 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
Hey ZteX, what do you think about this: http://tricone-mining.com/This: https://…
|
n/a | ztex | July 18, 2012, 06:04:50 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
When will i be able to use that on my Ztex Cluster ? I'm not sure whether it is…
|
n/a | ztex | June 04, 2012, 08:39:59 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
Yes, of course, but that also means that the longpoll probably doesn't work (tim…
|
n/a | ztex | July 18, 2012, 05:58:13 AM |
|
|
|
USB-FPGA Module 1.15y from Ztex not working Hardware
...Bus 001 Device 020: ID 04b4:8613 Cypress Semiconductor Corp. CY7C68013 EZ-USB…
|
n/a | ztex | July 16, 2012, 02:13:04 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards Hardware
If BTCMiner block monitor detects a new block, shouldn't the longpoll request be…
|
n/a | ztex | July 16, 2012, 02:10:54 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
A disconnect command is planned for future. It would allow to identify the disco…
|
n/a | ztex | July 13, 2012, 03:04:32 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
2 Feature requests/suggestions:- Would be nice to be able to print out boards st…
|
n/a | ztex | July 12, 2012, 05:18:32 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
BTCMiner -- Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150BTCMiner runs…
|
n/a | ztex | August 29, 2011, 09:20:52 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 Mining software (miners)
A new release (120703) is available at http://www.ztex.de/btcminer New features…
|
n/a | ztex | July 12, 2012, 05:09:50 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Does someone know how much current the quads pull from the usb connection?In my…
|
n/a | ztex | July 09, 2012, 02:42:31 PM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Does someone know how much current the quads pull from the usb connection?In my…
|
n/a | ztex | July 04, 2012, 02:39:02 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
is it only for the 1.15x or also for the y?I've only tested in on the 1.15x. US…
|
n/a | ztex | June 22, 2012, 04:05:16 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
A new testing version has bees released.Details can be found in the software thr…
|
n/a | ztex | June 22, 2012, 03:45:25 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
A new testing version has been released.Binaries: http://www.ztex.de/btcminer/Zt…
|
n/a | ztex | June 22, 2012, 03:42:10 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
The theoretical stale rate with "block monitoring" @212 MHz is (0.25s + 5.05s/)…
|
n/a | ztex | June 20, 2012, 09:01:22 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
I sent an e-mail to [...] for support but I guess I'll report my problem here al…
|
n/a | ztex | June 20, 2012, 08:24:19 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
Inspector 2211 already mentioned it and it is also hidden in the datasheet ("Sim…
|
n/a | ztex | June 19, 2012, 02:10:33 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
How does the block monitoring work for BTCMiner? If one of the miners detects a…
|
n/a | ztex | June 19, 2012, 02:31:41 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
Ok think I found out why the down throttling spiral occured. my local BTC server…
|
n/a | ztex | June 18, 2012, 09:09:11 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
Ok, but why did the cluster stop!!!In cluster modes the software only stops for…
|
n/a | ztex | June 18, 2012, 09:05:38 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
How high will your bitstream clock? I was thinking of using some heroic cooling…
|
n/a | ztex | June 18, 2012, 08:59:37 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
Bitfury experienced a similar thing.Yeah, I know… once I have fewer things on my…
|
n/a | ztex | June 18, 2012, 08:54:14 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Code:001-0: ztex_ufm1_15y1-04A36DF26A-1: f=232.00MHz, errorRate=0.23%, maxErro…
|
n/a | ztex | June 14, 2012, 03:48:14 AM |
|
|
|
Comparison of ALL Spartan6 boards: voltage regulator max current & efficiency Hardware
No idea where the 75% come from. According to my measurements on a 1.15x board (…
|
n/a | ztex | June 14, 2012, 03:41:21 AM |
|
|
|
100BTC bounty for bitstream that fries ztex boards Hardware
Would it not be possible to void the warranty running non approved bitstreams?Im…
|
n/a | ztex | June 13, 2012, 07:22:13 AM |
|
|
|
Comparison of ALL Spartan6 boards: voltage regulator max current & efficiency Hardware
Ztex 1.15x/1.15y8A per FPGAAlpha and Omega AOZ1025D75% efficientNo idea where th…
|
n/a | ztex | June 13, 2012, 07:12:58 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Code:2012-06-12T04:59:28: 001-0: ztex_ufm1_15y1-04A36DE0AA-3: Error: Read timed…
|
n/a | ztex | June 13, 2012, 07:00:42 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
The third fpga on his quad is failing. All the others behave normal I asked you…
|
n/a | ztex | June 13, 2012, 06:54:39 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Another question due to possible failing on long (ok, here it was
|
n/a | ztex | June 13, 2012, 06:45:29 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
70% hashrate drop per what second?Time plays no role.QuoteIts 70% of the Number…
|
n/a | ztex | June 13, 2012, 06:40:19 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
one very very simple request: make it run at 300MH No wait.. just that: Could yo…
|
n/a | ztex | June 12, 2012, 02:58:07 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
Make fmax configurable to underclock the fpgas;)I wrote it several times before:…
|
n/a | ztex | June 12, 2012, 02:56:15 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
The third fpga on his quad is failing. All the others behave normal I asked you…
|
n/a | ztex | June 12, 2012, 02:53:26 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Set -oh to another value. Try 0.1. This way you can see how low it will fall. If…
|
n/a | ztex | June 11, 2012, 04:38:03 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Just some logging now:...As you see *11 is ok, *AA problematic.QuoteThe FPGA dow…
|
n/a | ztex | June 11, 2012, 04:34:29 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
Is Ztex the only one developing the Java BTCMiner?Could it be run from source co…
|
n/a | ztex | June 11, 2012, 04:18:19 AM |
|
|
|
100BTC bounty for bitstream that fries ztex boards Hardware
There have been some (IMHO unwarranted) concerns about board damage due to exces…
|
n/a | ztex | June 11, 2012, 04:06:07 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
4. I'm concerned about the reliability (due to the 2-year warranty):...K/w for t…
|
n/a | ztex | June 11, 2012, 04:01:07 AM |
|
|
|
Algorithmically placed FPGA miner: 245MH/s/chip and still rising Hardware
1. It's about 12W, not 22 W, that is very important.I derived the 22W from the t…
|
n/a | ztex | June 04, 2012, 01:01:52 PM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Problem with that design is that the jtag port can't be used since u placed the…
|
n/a | ztex | June 04, 2012, 08:01:05 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
First fullcover waterblock "print' - http://www.abload.de/img/fcpga1wc6kutn.jpgN…
|
n/a | ztex | June 04, 2012, 07:52:28 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
BTC payment is not accepted?BTC payments are processed per email. Currently fees…
|
n/a | ztex | May 29, 2012, 01:55:07 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
But if youre right in your position, I doubt ztex wont listen . Just be patient…
|
n/a | ztex | May 25, 2012, 03:09:56 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
Ok, could you add a zero error rate command... that lowers the frequency until e…
|
n/a | ztex | May 25, 2012, 02:56:24 AM |
|
|
|
ZTEX USB-FPGA Modules 1.15x and 1.15y: 210 and 850 MH/s FPGA Boards Hardware
ztex, can you please upgrade the AOZ1025 buck regulator on your designs to anoth…
|
n/a | ztex | May 25, 2012, 02:54:54 AM |
|
|
|
BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 210 MH/s on LX150 Mining software (miners)
Thank u ill try it €: with my small knowledge of OSX (and linux) i can't get it…
|
n/a | ztex | May 23, 2012, 03:10:18 AM |
Jump to: