Pages:
Author

Topic: . - page 2. (Read 49304 times)

newbie
Activity: 25
Merit: 100
September 16, 2015, 02:16:50 PM
ATM Bittrex moved Crave wallet to maintenance status.



Can someone tell us what the proper blockheight/hash is?  We update as requested by Sept 7th.... Just got another update request this morning at 05:00 PST.  New version is installed and not syncing or connecting to anything.  We were in sync with the blockexplorers, but i'm seeing another chain with shorter height.

What is going on?

Thanks,
richie@bittrex

Basically majority of the services are not updating so the confusion
newbie
Activity: 25
Merit: 100
September 16, 2015, 02:16:16 PM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?


Excuse Me? I have told to update the client, If you don't update it, that is then your fault

how mac users will update our wallets?
can i use the same wallet.dat on windows?

As I told you I cannot compile a Mac Wallet... Although you can compile a Mac Wallet
newbie
Activity: 25
Merit: 100
September 16, 2015, 02:10:47 PM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?


Excuse Me? I have told to update the client, If you don't update it, that is then your fault

i agree 8-bit. this was too short time shot.

2 ways to cover damage.
post pone all forks to future. or keep current chain and get angry messages..

Wait, okay, I have edited the code and postponded the fork to Block 200000
hero member
Activity: 937
Merit: 1000
September 16, 2015, 01:53:35 PM
ATM Bittrex moved Crave wallet to maintenance status.



Can someone tell us what the proper blockheight/hash is?  We update as requested by Sept 7th.... Just got another update request this morning at 05:00 PST.  New version is installed and not syncing or connecting to anything.  We were in sync with the blockexplorers, but i'm seeing another chain with shorter height.

What is going on?

Thanks,
richie@bittrex
legendary
Activity: 1036
Merit: 1000
8b 16b DEMOSCENE FTW
September 16, 2015, 01:22:33 PM
ATM Bittrex moved Crave wallet to maintenance status.

legendary
Activity: 910
Merit: 1000
September 16, 2015, 12:39:34 PM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?


Excuse Me? I have told to update the client, If you don't update it, that is then your fault

i agree 8-bit. this was too short time shot.

2 ways to cover damage.
post pone all forks to future. or keep current chain and get angry messages..
legendary
Activity: 2184
Merit: 1028
#mitandopelomundo
September 16, 2015, 12:17:01 PM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?


Excuse Me? I have told to update the client, If you don't update it, that is then your fault

how mac users will update our wallets?
can i use the same wallet.dat on windows?
sr. member
Activity: 252
Merit: 250
September 16, 2015, 11:44:49 AM
ICM...please come back...this is ridiculous nad sad at once.
Never give a responsibility to a children.
newbie
Activity: 25
Merit: 100
September 16, 2015, 11:33:13 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?


Excuse Me? I have told to update the client, If you don't update it, that is then your fault
legendary
Activity: 1036
Merit: 1000
8b 16b DEMOSCENE FTW
September 16, 2015, 11:23:00 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
So do you have thousands of crave to spend on refunds?
newbie
Activity: 25
Merit: 100
September 16, 2015, 11:14:43 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?


Yup
legendary
Activity: 1036
Merit: 1000
8b 16b DEMOSCENE FTW
September 16, 2015, 11:08:51 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
Do you understand consequences of your proceeding?
newbie
Activity: 25
Merit: 100
September 16, 2015, 11:05:59 AM
Meanwhile:

Code:
lossless@crave:/media/lossless/Linux/6669/crave-master$ gdb ./crave-qt
GNU gdb (Ubuntu 7.9-1ubuntu1) 7.9
Copyright (C) 2015 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
.
Find the GDB manual and other documentation resources online at:
.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from ./crave-qt...(no debugging symbols found)...done.
(gdb) run
Starting program: /media/lossless/Linux/6669/crave-master/crave-qt
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Failed to connect to SAM(111)
Created a brand new SAM session (FVGYNQUB)
Failed to connect to SAM(111)
Created a new SAM session (FVGYNQUB)  from another (FVGYNQUB)
Closing SAM session (FVGYNQUB) ...
Failed to connect to SAM(111)
[New Thread 0x7fffc2ffd700 (LWP 8028)]
Failed to connect to SAM(111)
Created a new SAM session (IBSVVJ)  from another (FVGYNQUB)
Closing SAM session (IBSVVJ) ...
[New Thread 0x7fff9f7fe700 (LWP 8035)]
[New Thread 0x7fff97fff700 (LWP 8034)]
[New Thread 0x7fff9ffff700 (LWP 8033)]
[New Thread 0x7fffc0ff9700 (LWP 8032)]
[New Thread 0x7fffc17fa700 (LWP 8031)]
[New Thread 0x7fffc1ffb700 (LWP 8030)]
[New Thread 0x7fffc27fc700 (LWP 8029)]
[New Thread 0x7fffc37fe700 (LWP 8027)]
[New Thread 0x7fffc3fff700 (LWP 8026)]
[New Thread 0x7fffcc81a700 (LWP 8025)]
[New Thread 0x7fffcd01b700 (LWP 8024)]
[New Thread 0x7fffcd81c700 (LWP 8023)]
[New Thread 0x7fffdbfff700 (LWP 8021)]
[New Thread 0x7fffdb7fe700 (LWP 8018)]
[New Thread 0x7fffe0d7a700 (LWP 8016)]
[New Thread 0x7fffe210c700 (LWP 8015)]
[New Thread 0x7fffeb84d700 (LWP 8013)]

Program received signal SIGSEGV, Segmentation fault.
0x000000000078af2e in MessagePage::setModel(MessageModel*) ()
(gdb)

newbie
Activity: 25
Merit: 100
September 16, 2015, 11:05:42 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.

The one with the latest client
legendary
Activity: 1036
Merit: 1000
8b 16b DEMOSCENE FTW
September 16, 2015, 10:40:29 AM
So which forkchain/network is valid one?
At this moment this is kinda madness, people will loose their coins.
newbie
Activity: 25
Merit: 100
September 16, 2015, 10:34:50 AM
I am intending to release Quantum Squared (v2.1.0) in October,

It will have Secure Messaging (Currently UI Problems), AuxPoW (Code Compatibility Problems) and Rebrand? (Still choosing to or not to)

Should we do VoIP Huh
newbie
Activity: 25
Merit: 100
September 16, 2015, 10:32:10 AM
I want to know something. If I'm not using NiceHash, can I still mine one the MultiPool ? Because I started to mine and I don't see any hashrate, everything at 0 MH/s.

I doubt that the multi pool updated their wallet
legendary
Activity: 1120
Merit: 1004
September 16, 2015, 06:29:54 AM
I want to know something. If I'm not using NiceHash, can I still mine one the MultiPool ? Because I started to mine and I don't see any hashrate, everything at 0 MH/s.
newbie
Activity: 25
Merit: 100
September 15, 2015, 10:11:17 PM
You need to test the DGW3 fork on testnet. I have been working on DarkSilk and had issues that you do not want on MainNet.

Also your code for Masternode enforcement in wallet.cpp is wrong.

Code:
   // Masternode Payments
    int payments = 1;
    // start masternode payments
    bool bMasterNodePayment = true; // note was false, set true to test

    if ( Params().NetworkID() == CChainParams::TESTNET ){
        if (GetTime() > START_MASTERNODE_PAYMENTS_TESTNET ){
            bMasterNodePayment = true;
        }
    }else{
        if (GetTime() > START_MASTERNODE_PAYMENTS){
            bMasterNodePayment = true;
        }
    }

should of been

Code:
   // Masternode Payments
    int payments = 1;
    // start masternode payments
    bool bMasterNodePayment = false;

    if ( Params().NetworkID() == CChainParams::TESTNET ){
        if (GetTime() > START_MASTERNODE_PAYMENTS_TESTNET ){
            bMasterNodePayment = true;
        }
    }else{
        if (GetTime() > START_MASTERNODE_PAYMENTS){
            bMasterNodePayment = true;
        }
    }

bit late now.....

Also SPORK_4_RECONVERGE_DATA is unused and can be removed from spork.h

This is done by ICM (MASTERNODE SHIT)
hero member
Activity: 490
Merit: 500
CTO - Silk Network
September 15, 2015, 04:17:03 PM
You need to test the DGW3 fork on testnet. I have been working on DarkSilk and had issues that you do not want on MainNet.

Also your code for Masternode enforcement in wallet.cpp is wrong.

Code:
   // Masternode Payments
    int payments = 1;
    // start masternode payments
    bool bMasterNodePayment = true; // note was false, set true to test

    if ( Params().NetworkID() == CChainParams::TESTNET ){
        if (GetTime() > START_MASTERNODE_PAYMENTS_TESTNET ){
            bMasterNodePayment = true;
        }
    }else{
        if (GetTime() > START_MASTERNODE_PAYMENTS){
            bMasterNodePayment = true;
        }
    }

should of been

Code:
   // Masternode Payments
    int payments = 1;
    // start masternode payments
    bool bMasterNodePayment = false;

    if ( Params().NetworkID() == CChainParams::TESTNET ){
        if (GetTime() > START_MASTERNODE_PAYMENTS_TESTNET ){
            bMasterNodePayment = true;
        }
    }else{
        if (GetTime() > START_MASTERNODE_PAYMENTS){
            bMasterNodePayment = true;
        }
    }

bit late now.....

Also SPORK_4_RECONVERGE_DATA is unused and can be removed from spork.h
Pages:
Jump to: