1080Ti Specific - Best mining option - page 226.

joshuajones02

full member

Activity: 210

Merit: 100

Quote from: allcryptominer on September 07, 2017, 12:26:08 AM

Quote from: joshuajones02 on September 07, 2017, 12:15:04 AM

Zcash is starting to look less profitable... any switch over to LBRY DMD or ZEN yet?

I'm mining zen at the moment.

Around 2200sols and I get only 1 zen per 24h. Not really great. Anyone who got better coins to mine?

I was going to go to zen for a bit, which miner/pool do you prefer?

allcryptominer

full member

Activity: 336

Merit: 102

Quote from: joshuajones02 on September 07, 2017, 12:15:04 AM

Zcash is starting to look less profitable... any switch over to LBRY DMD or ZEN yet?

I'm mining zen at the moment.

Around 2200sols and I get only 1 zen per 24h. Not really great. Anyone who got better coins to mine?

allcryptominer

full member

Activity: 336

Merit: 102

Quote from: 64dimensions on September 06, 2017, 04:59:32 PM

Quote from: allcryptominer on September 06, 2017, 10:19:58 AM

I got 3 1080ti (palit super jetstream) and the difference in temp is sometimes more then 10°C between the cards. I'm using a frame built for 6 cards and im only using 3 so i got a lot of space between each card. Also I connect the screen to the motherboard and not the card. Anyone else who have the same experience?

As of now when mining zen the temps are as follows:

Gpu1=68
Gpu2=62
Gpu3=58

What is the hash rate for each card?

What pool are you using?

Between 715-740sols at 75% TDP, goes up and down.

I'm on supernova using EWBF's Zcash miner.

joshuajones02

full member

Activity: 210

Merit: 100

Zcash is starting to look less profitable... any switch over to LBRY DMD or ZEN yet?

ivakar

hero member

Activity: 756

Merit: 507

well, I'm not using 8x 1080tis because I have only 3 units, but let's calculate
I have Palit 1080ti JetStream each of then is running on 106PL and when mining on myr-gr algo I'm hitting about 133-135Mhs from each of them
and miner shows about 260-265W for cards @ 1800 -1820 Mhz @ 55-60C depending on the card

and I'm using a server PSU 2200W I purchased from ebay for 74$, so I have used only a half capacity of that power unit

so if I were you, I would bought 2400W HP server PSU, so it has power left for your needs like mb and so on

tleilaxu_eyes

full member

Activity: 145

Merit: 100

Quote from: hanskan on September 05, 2017, 06:43:22 PM

Quote from: JWT on September 05, 2017, 05:43:59 PM

2psu per 8 1080 ti rig
Evga 1000 g3 and some 1800 watt from aliexpress
The one from ali makes more noise,since it's fan have no speed control,but they both are good psus

Aren't you worried about the nonbrand 1800W PSU ? You can afford 1080ti and can't afford decent PSU ? Isn't it like buying nice sportscar and installing the oldest and ugliest rims and tyres ?

It's worse than that; it's like buying a nice car except with worn tread tires, old break pads, fucked up suspsension... and then taking it rally racing.

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Skein sp-mod #1 has just been released with a nice speedup on the gxtx 1080ti. (0.05 btc.)

pm for details.

clonemother

newbie

Activity: 6

Merit: 0

Just tried CCMiner 2.2.1, very little improvement that I can detect, seems that update was for improved Tribus algo performance...
One thing to note about my previous post about the PSUs is that if you use multiple smaller PSUs you can split them between circuits. When I install 240V power, these PSUs will produce 1200w apiece as apposed to the 900w they give me now...

clonemother

newbie

Activity: 6

Merit: 0

Oh, and I forgot, a pico PSU to run the motherboard, 5V, etc....

NameTaken

hero member

Activity: 630

Merit: 502

Quote from: universalresonance on September 06, 2017, 01:14:55 PM

Anyone- with 1x1080ti - try watching youtube videos whilst-mining?

lol some days it' lags so much that pc is unusable to watch video. I'd tried clean installation and didn't make a difference -funny thing is -this wasn't an issue with my single 1080 lol and 1080ti gives me issues.

Use the iGPU for your display?

clonemother

newbie

Activity: 6

Merit: 0

I've been using HP DPS-1200s, three per machine in parallel with s8 TIs. Only really need 2 but the extra one provides insurance. Currently working on a hotswap enclosure/backplane to fit in standard server chassis....

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: universalresonance on September 06, 2017, 01:14:55 PM

Anyone- with 1x1080ti - try watching youtube videos whilst-mining?

lol some days it' lags so much that pc is unusable to watch video. I'd tried clean installation and didn't make a difference -funny thing is -this wasn't an issue with my single 1080 lol and 1080ti gives me issues.

If reduce the intensity you'll lose some hashrate but the pc won't lag. In the first place you shouldn't do anything while mining but if you gotta do it, reduce the intensity of the miner to make the card run at 95% and give you some headroom to do other things.

TeamGreen

newbie

Activity: 51

Merit: 0

Quote from: rustiv on September 05, 2017, 05:27:33 PM

does someone have a 8x 1080 Ti rig? what psu are you using?

These work very well - 2400w and 94% platinum efficiency. $159 + around $40 for the ATX adapter from Parallel Miner. Link is below.

http://www.parallelminer.com/?wpam_id=1

https://i.imgur.com/9SQ57nv.jpg

We now have these running our 8x 1080 Ti rigs by themselves, without the additional power supply and they seem to run just fine.

https://i.imgur.com/XXscuNK.jpg

64dimensions

hero member

Activity: 578

Merit: 508

Quote from: allcryptominer on September 06, 2017, 10:19:58 AM

I got 3 1080ti (palit super jetstream) and the difference in temp is sometimes more then 10°C between the cards. I'm using a frame built for 6 cards and im only using 3 so i got a lot of space between each card. Also I connect the screen to the motherboard and not the card. Anyone else who have the same experience?

As of now when mining zen the temps are as follows:

Gpu1=68
Gpu2=62
Gpu3=58

What is the hash rate for each card?

What pool are you using?

elf_ua

newbie

Activity: 54

Merit: 0

Quote from: treasure9 on September 06, 2017, 02:01:16 PM

Guys, have you tried CCminer 2.2.1, is there any difference compare to previous version?

Try and let us know

treasure9

newbie

Activity: 56

Merit: 0

Guys, have you tried CCminer 2.2.1, is there any difference compare to previous version?

NameTaken

hero member

Activity: 630

Merit: 502

Quote from: RSO_ on September 06, 2017, 08:28:21 AM

Quote from: NameTaken on September 05, 2017, 01:46:43 PM

The hashrate doesn't change whether my memory is set to 0, -500, -1000, -2000, etc so why -500?

It lowers your power consumption while costing you no loss in hashing power. I doubt your card will actually be running at -2000 if you set it to that...

Have you measured how much electricity is actually saves? Why not set to -1000?

universalresonance

full member

Activity: 168

Merit: 100

Anyone- with 1x1080ti - try watching youtube videos whilst-mining?

lol some days it' lags so much that pc is unusable to watch video. I'd tried clean installation and didn't make a difference -funny thing is -this wasn't an issue with my single 1080 lol and 1080ti gives me issues.

saul.goodman

member

Activity: 98

Merit: 10

Quote from: NameTaken on September 05, 2017, 06:45:28 PM

6 cards/2 850W PSUs is a good balance and about the recommended limit per 15A circuit.

Sometimes is nice to live in europe
230V 16A
400V 32A (up to 125A)

easyrimka

sr. member

Activity: 518

Merit: 261

hi guyz, what are you mining at this moment ? any new promising coin ? i have stopped mining magnatum as it seem shit to me

Topic: 1080Ti Specific - Best mining option - page 226. (Read 409660 times)