[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 513.

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: lenny_ on July 10, 2013, 02:55:34 AM

Quote from: Raulnsh on July 09, 2013, 11:49:58 PM

I'm doing test mining with versions 13.0-13.1 for two days

Code:

2013-07-10 10:47:12.841000  Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000  Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000  Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions

No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?

As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer

Actually 8x isn't that rare either ...

bitpop

legendary

Activity: 2912

Merit: 1060

Use bitparking

Quote from: asyring on July 10, 2013, 04:59:27 AM

It is possible to implement that the namecoin mining is not soloming?
Is there a chance to poolmine namecoins?

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: lenny_ on July 10, 2013, 02:55:34 AM

Quote from: Raulnsh on July 09, 2013, 11:49:58 PM

I'm doing test mining with versions 13.0-13.1 for two days

Code:

2013-07-10 10:47:12.841000  Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000  Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000  Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions

No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?

As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer

348kh/s is miniscule.

M

asyring

newbie

Activity: 29

Merit: 0

It is possible to implement that the namecoin mining is not soloming?
Is there a chance to poolmine namecoins?

lenny_

legendary

Activity: 1036

Merit: 1000

DARKNETMARKETS.COM

Quote from: Raulnsh on July 09, 2013, 11:49:58 PM

I'm doing test mining with versions 13.0-13.1 for two days

Code:

2013-07-10 10:47:12.841000  Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000  Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000  Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions

No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?

As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer

Raulnsh

newbie

Activity: 22

Merit: 0

Quote from: bitpop on July 10, 2013, 01:34:12 AM

Get a new cpu miner?

OK to get new CPU miner

.

bitpop

legendary

Activity: 2912

Merit: 1060

Get a new cpu miner?

Raulnsh

newbie

Activity: 22

Merit: 0

Quote from: fsb4000 on July 10, 2013, 12:34:55 AM

Quote from: Raulnsh on July 10, 2013, 12:17:10 AM

Quote from: bitpop on July 10, 2013, 12:14:24 AM

Try the proxy listed on slush pool

It does not work. This proxy is for bicoins only, it has no option -pa scrypt

proxy for scrypt: http://ltcmine.ru/mining_proxy.exe
https://github.com/CryptoManiac/stratum-mining-proxy

Yes, yes! It is just dec 2012 version 1.3.0 which works with ltcmine but does not work with p2pool Sad

Code:

2013-07-10 12:25:23: Running command: C:\guiminer\stratumproxy\mining_proxy.exe -pa scrypt -o ***.***.***.*** -p **** 
2013-07-10 12:25:23: Listener for "Stratum" started
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,437 WARNING proxy jobs. # C extension for midstate not available. Using default implementation instead.
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,457 ERROR proxy mining_proxy.main # Stratum host/port autodetection failed
2013-07-10 12:25:24: Listener for "Stratum": Traceback (most recent call last):
2013-07-10 12:25:24: Listener for "Stratum": File "mining_proxy.py", line 155, in main
2013-07-10 12:25:24: Listener for "Stratum": File "twisted\internet\defer.pyo", line 1045, in _inlineCallbacks
2013-07-10 12:25:24: Listener for "Stratum": File "mining_libs\utils.pyo", line 106, in detect_stratum
2013-07-10 12:25:24: Listener for "Stratum": TypeError: 'NoneType' object has no attribute '__getitem__'
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,457 INFO proxy mining_proxy.main # Stratum proxy version: 1.3.0
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,457 INFO proxy mining_proxy.main # Trying to connect to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,457 INFO proxy mining_proxy.main # Setting PoW algo: scrypt
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,460 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,460 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,460 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,466 INFO proxy mining_proxy.main # -----------------------------------------------------------------------
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,466 INFO proxy mining_proxy.main # -----------------------------------------------------------------------
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,466 INFO proxy client_service.handle_event # Setting new difficulty: 5.38747577579
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,493 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:24: Listener for "Stratum": 2013-07-10 12:25:24,494 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,707 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,707 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,707 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,720 INFO proxy client_service.handle_event # Setting new difficulty: 5.38747577579
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,727 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:26: Listener for "Stratum": 2013-07-10 12:25:26,727 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,194 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,194 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,194 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,198 INFO proxy client_service.handle_event # Setting new difficulty: 6.32609060383
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,213 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:29: Listener for "Stratum": 2013-07-10 12:25:29,213 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,836 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,836 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,836 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,839 INFO proxy client_service.handle_event # Setting new difficulty: 6.32609060383
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,861 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:31: Listener for "Stratum": 2013-07-10 12:25:31,861 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,713 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,713 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,713 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,743 INFO proxy client_service.handle_event # Setting new difficulty: 6.32609060383
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,834 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:34: Listener for "Stratum": 2013-07-10 12:25:34,834 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,507 INFO stats stats.print_stats # 1 peers connected, state changed 1 times
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,507 INFO proxy mining_proxy.on_connect # Connected to Stratum pool at ***.***.***.***:****
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,509 INFO proxy mining_proxy.on_connect # Subscribing for mining jobs
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,552 INFO proxy client_service.handle_event # Setting new difficulty: 6.32609060383
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,671 INFO proxy mining_proxy.on_disconnect # Disconnected from Stratum pool at ***.***.***.***:****
2013-07-10 12:25:37: Listener for "Stratum": 2013-07-10 12:25:37,671 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2013-07-10 12:25:39: Listener for "Stratum": Unhandled error in Deferred:
2013-07-10 12:25:39: Listener for "Stratum": Unhandled Error
2013-07-10 12:25:39: Listener for "Stratum": Traceback (most recent call last):
2013-07-10 12:25:39: Listener for "Stratum": File "twisted\web\server.pyo", line 156, in process
2013-07-10 12:25:39: Listener for "Stratum": File "twisted\web\server.pyo", line 191, in render
2013-07-10 12:25:39: Listener for "Stratum": File "twisted\web\resource.pyo", line 216, in render
2013-07-10 12:25:39: Listener for "Stratum": File "mining_libs\getwork_listener.pyo", line 165, in render_POST
2013-07-10 12:25:39: Listener for "Stratum": ---  ---
2013-07-10 12:25:39: Listener for "Stratum": File "twisted\internet\defer.pyo", line 134, in maybeDeferred
2013-07-10 12:25:39: Listener for "Stratum": File "mining_libs\worker_registry.pyo", line 37, in authorize
2013-07-10 12:25:39: Listener for "Stratum": File "stratum\socket_transport.pyo", line 89, in rpc
2013-07-10 12:25:39: Listener for "Stratum": stratum.custom_exceptions.TransportException: Not connected

forrestv

hero member

Activity: 516

Merit: 643

Quote from: Raulnsh on July 09, 2013, 11:49:58 PM

I'm doing test mining with versions 13.0-13.1 for two days

Code:

2013-07-10 10:47:12.841000  Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000  Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000  Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions

No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?

It is normal. Expected time to share is 1 day, but expected time to block is 1.4 hours. P2Pool is increasing your share difficulty to prevent you from receiving dust payouts. You will get shares if you keep mining.

evilpete

member

Activity: 77

Merit: 10

Quote from: daemondazz on July 09, 2013, 01:35:30 AM

Quote from: yxxyun on July 09, 2013, 12:58:46 AM

how many percent was updated? where can we see? can wait for the switch.

I'd also like to know what percentage of the network has upgraded. Based on http://p2pool-nodes.info/, its 96 nodes are still at < v13.0 and 32 at > v13.0, so around 25%.

p2pool-nodes.info only shows a portion of the public nodes. A bit over a week ago it was only showing 30-40 nodes but I was able to tweak my pool to attempt to explore and it found ~260 public nodes. p2pool-nodes.info hadn't found my public node for about 5-6 weeks. It finally updated last week sometime.

Treat p2pool-nodes.info as a sample, not an exhaustive list.

fsb4000

legendary

Activity: 1400

Merit: 1000

Quote from: Raulnsh on July 10, 2013, 12:17:10 AM

Quote from: bitpop on July 10, 2013, 12:14:24 AM

Try the proxy listed on slush pool

It does not work. This proxy is for bicoins only, it has no option -pa scrypt

proxy for scrypt: http://ltcmine.ru/mining_proxy.exe
https://github.com/CryptoManiac/stratum-mining-proxy

Raulnsh

newbie

Activity: 22

Merit: 0

Quote from: bitpop on July 10, 2013, 12:19:36 AM

Why do you need a proxy?

I have several getwork CPU miners behind stratum proxy.

bitpop

legendary

Activity: 2912

Merit: 1060

Why do you need a proxy?

Raulnsh

newbie

Activity: 22

Merit: 0

Quote from: bitpop on July 10, 2013, 12:14:24 AM

Try the proxy listed on slush pool

It does not work. This proxy is for bicoins only, it has no option -pa scrypt

bitpop

legendary

Activity: 2912

Merit: 1060

Try the proxy listed on slush pool

Raulnsh

newbie

Activity: 22

Merit: 0

Quote from: Raulnsh

Do you have compatible stratum mining proxy as Windows binary? I need it for litecoin mining, but mining_proxy 1.3.0 from guiminer-scrypt is not compatible with p2pool.

Again, yes or no?

Raulnsh

newbie

Activity: 22

Merit: 0

I'm doing test mining with versions 13.0-13.1 for two days

Code:

2013-07-10 10:47:12.841000 Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000 Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions

No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?

centove

full member

Activity: 194

Merit: 100

Quote from: Krellan on July 09, 2013, 12:48:17 PM

I upgraded to p2pool 13.1 and it works great!

Question though, when I run it, version is reported as this:

Version: unknown 666f7272657374762d7032706f6f6c2d38333235366538

Is this the correct version? I installed the p2pool 13.1 snapshot from Github (downloaded the snapshot tarball itself, did not use Git to pull the source).

Thanks!
Josh

The code pulls the version from the directory name that it is in.. ?
https://github.com/forrestv/p2pool/blob/master/p2pool/__init__.py -- _get_version()

Try renaming the directory it's in as p2pool-13.1 and restart it then see what it tells ya.

daemondazz

sr. member

Activity: 448

Merit: 250

Quote from: forrestv on July 09, 2013, 08:35:34 AM

Quote from: yxxyun on July 09, 2013, 12:58:46 AM

how many percent was updated? where can we see? can wait for the switch.

The "desired versions" graph shows this.

Ahh, that's cool, that graph makes more sense now

Thanks!

fsb4000

legendary

Activity: 1400

Merit: 1000

Quote from: devthedev on July 09, 2013, 04:54:19 PM

Hey everyone, I'm having an error with my P2Pool node. It says. Warning: A MAJORITY OF SHARES CONTAIN A VOTE FOR AN UNSUPPORTED SHARE IMPLEMENTATION! (v13 with 52% support) An upgrade is likely necessary. Check http://p2pool.forre.st/ for more information.

Any ideas what the problem is?

Thanks in advance.

The pool info is located here.

https://bitcointalksearch.org/topic/2ghs-official-coinchat-mining-pool-thread-252455

upgrade your node to 13.1 https://bitcointalksearch.org/topic/m.2682976

Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 513. (Read 2591928 times)