Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 512. (Read 2591928 times)
95% now
Did the fork happen? Interested to hear how BFL jallys do after the new changes.
If you have enough, you might be able to push us over the edge 
Edit: 3% remaining if it is based on the hourly average
Edit: 3% remaining if it is based on the hourly average
only 2 (~165GH) but i'm sure there are many other ASIC owners that would point there maschines to p2pool if it's working. The only reason for many ASIC owners is that p2pool was not working form them.
Hopfully p2pool will work and the hashrate will go to up some TH/s
More hashrate would be fantastic. My little AM USB farm shouldn't be in the top 10
If you have enough, you might be able to push us over the edge
Edit: 3% remaining if it is based on the hourly average
Edit: 3% remaining if it is based on the hourly average
only 2 (~165GH) but i'm sure there are many other ASIC owners that would point there maschines to p2pool if it's working. The only reason for many ASIC owners is that p2pool was not working form them.
Hopfully p2pool will work and the hashrate will go to up some TH/s
the changes will take effect 12 hours after 95% of the mining power has been upgraded, as usual.
I guess it will be a little while yet.
only 8% left for hardfork to 13.1!
can't wait to test my avalons on p2pool
can't wait to test my avalons on p2pool
If you have enough, you might be able to push us over the edge
Edit: 3% remaining if it is based on the hourly average
only 8% left for hardfork to 13.1!
can't wait to test my avalons on p2pool
can't wait to test my avalons on p2pool
I just wanted to give a shout out too and let the p2pool community know about NastyFans.org.
A significant portion of the hashrate for p2pool comes from OgNasty's mining operation. They mines BTC/LTC/NMC/FTC/IXC/DVC. He really believes in decentralization of bitcoin and has been supporting p2pool both with hashrate and donations to development.
There are a group of supporters called the NastyFans, and info is available here:
https://bitcointalksearch.org/topic/nastyfans-the-bitcoin-enthusiast-fan-club-est-2012-86854
and here:
https://www.nastyfans.org/about
The fan club receives donations back from the mining operation at rate of ~4.8% per year. Shares are exchangeable at auction as well, so you probably should think of it more as a dividend producing stock than a share in a miner. Market cap is close to $1 million.
Of course, do your due diligence, but this seems to be an ethical and good supporter of bitcoin - I just wanted to spread the word and let people know where our hashrate is coming form (in case you weren't aware)
As stated above, P2Pool does not charge a mandatory fee. That being said, we are donating 0.9% of both BTC & LTC earnings toward the future development of P2Pool. I see this as us doing good. I do believe we would be slightly more profitable mining with one of the large pools and withholding donations, but I personally would rather do what is best to support the community and Bitcoin decentralization/development in general.
A significant portion of the hashrate for p2pool comes from OgNasty's mining operation. They mines BTC/LTC/NMC/FTC/IXC/DVC. He really believes in decentralization of bitcoin and has been supporting p2pool both with hashrate and donations to development.
There are a group of supporters called the NastyFans, and info is available here:
https://bitcointalksearch.org/topic/nastyfans-the-bitcoin-enthusiast-fan-club-est-2012-86854
and here:
https://www.nastyfans.org/about
The fan club receives donations back from the mining operation at rate of ~4.8% per year. Shares are exchangeable at auction as well, so you probably should think of it more as a dividend producing stock than a share in a miner. Market cap is close to $1 million.
Of course, do your due diligence, but this seems to be an ethical and good supporter of bitcoin - I just wanted to spread the word and let people know where our hashrate is coming form (in case you weren't aware)
I'm not that into mining, but does P2P charge a fee?
As stated above, P2Pool does not charge a mandatory fee. That being said, we are donating 0.9% of both BTC & LTC earnings toward the future development of P2Pool. I see this as us doing good. I do believe we would be slightly more profitable mining with one of the large pools and withholding donations, but I personally would rather do what is best to support the community and Bitcoin decentralization/development in general.
Yeah... we have now about 55%
@dc81 greate it's ok now
@CartmanSPC Hehe, thanks
@dc81 greate it's ok now
@CartmanSPC Hehe, thanks
http://p2pool.hostv.pl/ - Added Version Check
Thanks for the site svirus! Keep up the good work.
http://p2pool.hostv.pl/ - Added Version Check
@dc81
My node 188.165.19.28:9332 ( http://pool.hostv.pl:9332/ ) always is online and have at least connected 2x CM1 (800mh/s) ... on your site show 0 Mh/s on my node... why ?
@dc81
My node 188.165.19.28:9332 ( http://pool.hostv.pl:9332/ ) always is online and have at least connected 2x CM1 (800mh/s) ... on your site show 0 Mh/s on my node... why ?
should be fixed now
http://p2pool.hostv.pl/ - Added Version Check
@dc81
My node 188.165.19.28:9332 ( http://pool.hostv.pl:9332/ ) always is online and have at least connected 2x CM1 (800mh/s) ... on your site show 0 Mh/s on my node... why ?
@dc81
My node 188.165.19.28:9332 ( http://pool.hostv.pl:9332/ ) always is online and have at least connected 2x CM1 (800mh/s) ... on your site show 0 Mh/s on my node... why ?
Quote
Code:
2013-07-10 10:47:12.841000 Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000 Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions
Is it normal? Will I get any shares with p2pool?
As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer
348kh/s is miniscule.
M
for LTC it's respectable, equivalent to ~500MH/s on BTC's network.
Good point. I missed it was LTC. When it said 21.4 hours to share, I assumed the worst.
M
i have been maintaining one for btc at http://p2pool-nodes.info/
i noticed you hard coded the port number, but there are nodes that don't use the default port.
i have filtered out p2pool versions that aren't on 11.x or 13.x right now and those that are disconnected from bitcoind.
Did you base it on p2pool-scanner or wrote your own?
wrote it myself
i have been maintaining one for btc at http://p2pool-nodes.info/
i noticed you hard coded the port number, but there are nodes that don't use the default port.
i have filtered out p2pool versions that aren't on 11.x or 13.x right now and those that are disconnected from bitcoind.
Did you base it on p2pool-scanner or wrote your own?
The Litecoin Project is proud to release the source of p2pool-scanner, an node.js app that scans the entire p2pool network and generates a page listing known public pools. The main benefit in releasing this source is to allow BTC p2pool to use it.
https://github.com/litecoin-project/p2pool-scanner
Source
http://p2pool.litecointools.com/
The p2pool LTC network is listed here. Yes, the current ordering is not ideal. Ordering by uptime isn't the greatest idea. It should be smarter in excluding old, known buggy versions of p2pool and when the daemon is warning. Please send pull requests to the above github project with general improvements to the code.
Someone else should run the official BTC p2pool-scanner. Keep it stable and contribute improvements to the source project, and we can ask forrestv to link to your p2pool scanner from the OP.
https://github.com/litecoin-project/p2pool-scanner
Source
http://p2pool.litecointools.com/
The p2pool LTC network is listed here. Yes, the current ordering is not ideal. Ordering by uptime isn't the greatest idea. It should be smarter in excluding old, known buggy versions of p2pool and when the daemon is warning. Please send pull requests to the above github project with general improvements to the code.
Someone else should run the official BTC p2pool-scanner. Keep it stable and contribute improvements to the source project, and we can ask forrestv to link to your p2pool scanner from the OP.
i have been maintaining one for btc at http://p2pool-nodes.info/
i noticed you hard coded the port number, but there are nodes that don't use the default port.
i have filtered out p2pool versions that aren't on 11.x or 13.x right now and those that are disconnected from bitcoind.
The Litecoin Project is proud to release the source of p2pool-scanner, an node.js app that scans the entire p2pool network and generates a page listing known public pools. The main benefit in releasing this source is to allow BTC p2pool to use it.
https://github.com/litecoin-project/p2pool-scanner
Source
http://p2pool.litecointools.com/
The p2pool LTC network is listed here. Yes, the current ordering is not ideal. Ordering by uptime isn't the greatest idea. It should be smarter in excluding old, known buggy versions of p2pool and when the daemon is warning. Please send pull requests to the above github project with general improvements to the code.
Someone else should run the official BTC p2pool-scanner. Keep it stable and contribute improvements to the source project, and we can ask forrestv to link to your p2pool scanner from the OP.
https://github.com/litecoin-project/p2pool-scanner
Source
http://p2pool.litecointools.com/
The p2pool LTC network is listed here. Yes, the current ordering is not ideal. Ordering by uptime isn't the greatest idea. It should be smarter in excluding old, known buggy versions of p2pool and when the daemon is warning. Please send pull requests to the above github project with general improvements to the code.
Someone else should run the official BTC p2pool-scanner. Keep it stable and contribute improvements to the source project, and we can ask forrestv to link to your p2pool scanner from the OP.
how many percent was updated? where can we see? can wait for the switch.
I'd also like to know what percentage of the network has upgraded. Based on http://p2pool-nodes.info/, its 96 nodes are still at < v13.0 and 32 at > v13.0, so around 25%.
I don't think number of nodes is the metric for cross-over, I think it's percentage of hashrate.
Right now it is:
13: 36% 360 GH/s
11: 64% 640 GH/s
I'm doing test mining with versions 13.0-13.1 for two days
No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?
Code:
2013-07-10 10:47:12.841000 Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000 Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions
Is it normal? Will I get any shares with p2pool?
As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer
348kh/s is miniscule.
M
for LTC it's respectable, equivalent to ~500MH/s on BTC's network.
how many percent was updated? where can we see? can wait for the switch.
I'd also like to know what percentage of the network has upgraded. Based on http://p2pool-nodes.info/, its 96 nodes are still at < v13.0 and 32 at > v13.0, so around 25%.
p2pool-nodes.info only shows a portion of the public nodes. A bit over a week ago it was only showing 30-40 nodes but I was able to tweak my pool to attempt to explore and it found ~260 public nodes. p2pool-nodes.info hadn't found my public node for about 5-6 weeks. It finally updated last week sometime.
Treat p2pool-nodes.info as a sample, not an exhaustive list.
i switched my node host to another machine and it just took some time to rebuild the list of p2pool nodes. i plan on adding the ability to manually adding a node and possibly custom hostnames instead of just the ip. but it may be a few weeks before i have time to incorporate it. however, i was able to add the bitcoind latency and hash rate of the node to the list.
I'm doing test mining with versions 13.0-13.1 for two days
No shares. Expected time may be 1.6 hours then again 1 day.
Is it normal? Will I get any shares with p2pool?
Code:
2013-07-10 10:47:12.841000 Local: 348kH/s in last 10.0 minutes Local dead on arrival: ~3.8% (2-6%) Expected time to share: 21.4 hours
2013-07-10 10:47:12.841000 Shares: 0 (0 orphan, 0 dead) Stale rate: ??? Efficiency: ??? Current payout: 0.0000 LTC
2013-07-10 10:47:12.872000 Pool: 741MH/s Stale rate: 20.0% Expected time to block: 1.4 hours
2013-07-10 10:47:18.778000
2013-07-10 10:47:18.809000 New work for worker! Difficulty: 0.000109 Share difficulty: 6.293200 Total block value: 50.001000 LTC including 10 transact
ions
Is it normal? Will I get any shares with p2pool?
As you see: Expected time to share: 21.4 hours
Variance make this number 5x bigger or smaller, depend on your luck. Wait a bit longer
3% probability for x5 and 0.4% for x8 to be exact...
Jump to: