24" 16awg PCIE-PCIE and PCIE leads, and 18awg M-F-M Splitters (6pin and 6+2pin) - page 2.

Finksy

legendary

Activity: 1022

Merit: 1003

Quote from: klondike_bar_recovery on July 27, 2016, 02:19:50 AM

bumping to the top, and including a warning:

my account was hacked and ive been locked out. Im following the recovery process but it relies on Theymos's quick response. Please do not PM or respond to PMs from "klondike_bar" until the issue is resolved.

In the meanwhile, I am able to still fulfill issues either through this account (not recommended for obvious reasons) or via email (if you know it). Previous clients are invited to ask me to sign a transaction with any payment address(es) they have used in the past with me. I'll have no problem signing to demonstrate ownership.

~~This posting is legitimate and I can vouch for it, do not send funds to the main klondike_bar account until it is recovered.~~ Recovered.

klondike_bar_recovery

member

Activity: 70

Merit: 10

bumping to the top, and including a warning:

my account was hacked and ive been locked out. Im following the recovery process but it relies on Theymos's quick response. Please do not PM or respond to PMs from "klondike_bar" until the issue is resolved.

In the meanwhile, I am able to still fulfill issues either through this account (not recommended for obvious reasons) or via email (if you know it). Previous clients are invited to ask me to sign a transaction with any payment address(es) they have used in the past with me. I'll have no problem signing to demonstrate ownership.

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

back to the top! custom orders welcome - if you need 5000pcs I'm the guy for you!

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

NEW! 6" Y-SPLITTERS [/b]
3x PCIe connectors (M-F-M) (one 6pin feeding 2x 6+2pin)
2x 4" 18awg legs/branches
Good for loads up to 160W/branch or 300W combined
Ideal for powering GPUs that require 8-pin connectors for optimum power

rdnkjdi

legendary

Activity: 1256

Merit: 1009

Sent a PM - ready to order 24 6 Pin Y splitters.

Would order 100 6 Pin to 8 Pin adapters if you would build them.

Jaz80

full member

Activity: 157

Merit: 100

Quote from: klondike_bar on April 26, 2016, 02:54:28 PM

Quote from: ?? on ??

Tons still in stock - bump up to the front page again!

Pm sent can you reply please
Thanks

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: ?? on ??

Tons still in stock - bump up to the front page again!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: HagssFIN on March 25, 2016, 06:42:47 PM

Quote from: klondike_bar on March 13, 2016, 11:48:34 PM

Quote from: philipma1957 on March 12, 2016, 06:42:58 PM

Would you be able to make f-m-f combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

The next best thing would maybe then be to use 8pcs of these: " 6" Y-SPLITTERS " and 8pcs of these: " 24" PCIe-to-PCIe "

yeah sidehack made some for me.

and if you have the 2880/2980 breakout board you will need them if you choose to run avalon 6's

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: klondike_bar on March 13, 2016, 11:48:34 PM

Quote from: philipma1957 on March 12, 2016, 06:42:58 PM

Would you be able to make f-m-f combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

The next best thing would maybe then be to use 8pcs of these: " 6" Y-SPLITTERS " and 8pcs of these: " 24" PCIe-to-PCIe "

TeQ99

full member

Activity: 166

Merit: 100

Pm send..

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: philipma1957 on March 12, 2016, 06:42:58 PM

Would you be able to make f-m-f combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

eretron

full member

Activity: 156

Merit: 100

PM Sent

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Would you be able to make f-m-f combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

gt_addict

hero member

Activity: 2492

Merit: 621

Do you ship to the uk?

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: QuentinA on March 08, 2016, 05:46:36 PM

Hi mate, I would like to order 16 of your 24" PCIe-to-PCIe to France zip 35000, could you give me a price please? (if you accept to ship there)

Cheers,
Q.

PM sent.

I got fully restocked the other day, so if i couldnt fill your order in te last week or two, you can message me now and I can get the order made up and shipped!

QuentinA

hero member

Activity: 628

Merit: 504

Hi mate, I would like to order 16 of your 24" PCIe-to-PCIe to France zip 35000, could you give me a price please? (if you accept to ship there)

Cheers,
Q.

gt_addict

hero member

Activity: 2492

Merit: 621

Do you ship these to the UK?

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: tutorialevideo on January 29, 2016, 09:35:56 PM

what is the price for one cable from this image?

first page of the thread, $3.60 + shipping for one cable

dance191

sr. member

Activity: 261

Merit: 250

For anyone thinking about getting any cables from Klondike_bar, I would say you gotta get some. I have been buying cables from him for about 1.5 years now. He has excellent cables at a great price. He always handles things very quickly and professionally, a real class act!!

Thanks for everything Klondike!

tutorialevideo

legendary

Activity: 1161

Merit: 1001

Don`t invest more than you can afford to lose