Pages:
Author

Topic: 24" 16awg PCIE-PCIE and PCIE leads, and 18awg M-F-M Splitters (6pin and 6+2pin) - page 3. (Read 28061 times)

legendary
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...

But those are Female, not male.

Do you mean these?
http://www.e22.biz/GetImage/dz04MDAmaD04MDAmSW1hZ2U9SW1nMV8yMTlmYzZiOS0xNGFiLTRiOTMtYTVkMi1kN2VjZGVkOWY0YjguanBn0.aspx

It would be pretty easy to make cables with these. You need them to extend the everyday female connectors?


Correct, those are dual female connectors.  For the zeus miners they accidentally used female connectors on the pcb for the first batch. They needed an adapter to go from the female PSU cable to the female pcb connector to make it work.  I can make these if anyone needs them.
legendary
Activity: 1302
Merit: 1068

But those are Female, not male.

Do you mean these?
http://www.e22.biz/GetImage/dz04MDAmaD04MDAmSW1hZ2U9SW1nMV8yMTlmYzZiOS0xNGFiLTRiOTMtYTVkMi1kN2VjZGVkOWY0YjguanBn0.aspx

It would be pretty easy to make cables with these. You need them to extend the everyday female connectors?
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
Can u make 6 pin female to 6pin female connectors? I'm in need of several for zeus thunders.
like these?

yes like that but with female ends not male like those.

then no, sorry.
full member
Activity: 131
Merit: 100
Can u make 6 pin female to 6pin female connectors? I'm in need of several for zeus thunders.
like these?

yes like that but with female ends not male like those.
legendary
Activity: 1022
Merit: 1003
I'd like to add, if the 16AWG cables were made to be more flexible, it would be due to more strands in the same width braid.  This effectively reduces their load-carrying ability, and would not be a good thing.  I have used hundreds (thousands I guess?) of klondike's or near identical cables, and have never run into a situation with bitcoin miners where flexibility hindered their setup.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
klondike, is it possible to use more flexible wires, because those you sell now is pieces of wood

Did you buy cables from me? I dont seem to have any forum messages regarding it.
Not directly, i got them with quakefiend's PSU package.
odd, as i said they have a decent flex to them, about equal to any other thick wired cable (such as a thick USB cord or C19 PSU cord).
like any thick wire, if you bend it it will retain the bending to some extent.
The picture in the above post is a good example; if i were to release, the wire would probably spring partway back (to about 90 degree angle)
hero member
Activity: 672
Merit: 500
klondike, is it possible to use more flexible wires, because those you sell now is pieces of wood

Did you buy cables from me? I dont seem to have any forum messages regarding it.
Not directly, i got them with quakefiend's PSU package.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
Can u make 6 pin female to 6pin female connectors? I'm in need of several for zeus thunders.
like these?
full member
Activity: 131
Merit: 100
Can u make 6 pin female to 6pin female connectors? I'm in need of several for zeus thunders.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
klondike, is it possible to use more flexible wires, because those you sell now is pieces of wood

Did you buy cables from me? I dont seem to have any forum messages regarding it.

In every batch of cables ive handles so far, the cables i get are as flexible as you would expect for 16awg wiring. They could be easily wrapped around objects or bend 180 degrees, and flex back on their own.  Definitely not stiff like a piece of wood
hero member
Activity: 672
Merit: 500
klondike, is it possible to use more flexible wires, because those you sell now is pieces of wood
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
these are still available! dont let it falling off the front page of the marketplace let you think I'm done Smiley

Whats the demand like for sheathed cables? Obviously they wont be terribly useful for industrial-scale operations, but I imagine some home users might be interested? I can try to whip up a few samples and go from there
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
What would be the shipping cost to France for 10x 24" PCIe LEADS  ?

Thank you

i dislike shipping outside north america generally, since its expensive and can take several weeks to arrive. I can get an exact quote if you like, but my guess would be around $15-25 shipping and 3-4weeks to arrive
zOU
hero member
Activity: 728
Merit: 500
★ these are stars ★
What would be the shipping cost to France for 10x 24" PCIe LEADS  ?

Thank you
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
Klondike gets busy, he'll get back at you Phil don't worry.

they are on the way. as of today.

Yeah, Klondike is a class act (and so is Finksy by the way).  He will not let you down.  He is a busy guy, but very professional.

thanks for the kindness Smiley

I have a 'real world' job, so some days i don't have as much opportunity to get back to PM's or hit the post office by the cutoff time. Typically though, i'll ship next-day on most orders.

ps: I respond more quickly to PM then to checking posts in this thread.
sr. member
Activity: 261
Merit: 250
Klondike gets busy, he'll get back at you Phil don't worry.

they are on the way. as of today.

Yeah, Klondike is a class act (and so is Finksy by the way).  He will not let you down.  He is a busy guy, but very professional.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Klondike gets busy, he'll get back at you Phil don't worry.

they are on the way. as of today.
legendary
Activity: 1022
Merit: 1003
Klondike gets busy, he'll get back at you Phil don't worry.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
where are you?  no reply here or pm.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
still selling!

could use 24 inch pcie with rings.  

rather 36 inch pcie with rings.

I think rings need fit ¼ or maybe 5/16 bolt

could use 12 cables.

I will get back to you on bolt size.

5/16 inch is the bolt size
Pages:
Jump to: