corvid, can you post cgminer log somewhere (pastebin)?
Of course. I've just restarted cgminer with logging enabled, let me know if you need a longer running/more verbose log.
http://pastebin.com/EG2RqaeG
Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool - page 872. (Read 4382653 times)
December 02, 2012, 04:37:07 PM
Of course. I've just restarted cgminer with logging enabled, let me know if you need a longer running/more verbose log.
http://pastebin.com/EG2RqaeG
December 02, 2012, 03:48:52 PM
corvid, can you post cgminer log somewhere (pastebin)?
December 02, 2012, 03:38:12 PM
I'm getting the no stratum notice too, even though I'm running the latest cgminer and have been on stratum for quite a while.
December 02, 2012, 01:36:59 PM
hm, maybe because phoenix != cgminer? They have different commandline options.
poclbm doesnt work for you?
poclbm doesnt work for you?
December 02, 2012, 01:34:19 PM
My extra flags don't work now, in GUIminer I went to file>newminer>cgminer and I changed the extension to point to phoenix.exe
When I click start, even with no extra flags, I get
Error: -u does not exist.
When I click start, even with no extra flags, I get
Error: -u does not exist.
December 02, 2012, 11:29:48 AM
So...I updated all my miners to the latest cgminer but the Stratum column still says no for all of them. Is there something else I need to do?
That detection has some delay, it will disappear in next round.
December 02, 2012, 10:36:28 AM
So...I updated all my miners to the latest cgminer but the Stratum column still says no for all of them. Is there something else I need to do?
No. It works fine here:Code:
cgminer -u xxx.yyy -p password -o http://api.bitcoin.cz:8332
December 02, 2012, 10:06:04 AM
So...I updated all my miners to the latest cgminer but the Stratum column still says no for all of them. Is there something else I need to do?
December 02, 2012, 07:15:12 AM
If you recently had some issues during miner startup on Statum, please try it again now. I found some problem on balancer which is fixed now.
December 02, 2012, 06:45:14 AM
Just updated GUI Miner to 11/18/12 version, and your site still says I'm not using stratum...is there anything else I need to change?
Can you try it once again? I found there was load balancer misconfiguration which may introduce such problems.
December 02, 2012, 06:43:05 AM
No matter if I enter the info manually with a blank config, or copy the config over, it doesn't connect.
Please be sure you typed worker credentials correctly. Everything is case sensitive. If it still fails, can you report it to cgminer thread?
December 02, 2012, 06:41:18 AM
Hey, so I recently switched over to Stratum mining. My rejects have gone down from 1% to 0.1% but it seems NMC mining is broken. Before I'd get ~0.02 NMC almost every round (no reward only once every 10-20 rounds); now, half of the rounds give me "none" NMC. Any ideas? Or is it just a crazy string of coincidences?
It is just coincidence. As Stratum miner, you still collects namecoins as on getwork. Just the pool namecoin hashrate is going down with higher % of stratum miners, because stratum backend doesn't have merged mining.
December 02, 2012, 06:39:22 AM
Interesting thing. I am using cgminer and things were going well but now I have had a tremendous increase in rejected shares.
I quit the two and then restarted the proxy app (from slush) then cgminer. Seems to have fixed it. What was it about? How did my miner get hashes that were above the target?
I quit the two and then restarted the proxy app (from slush) then cgminer. Seems to have fixed it. What was it about? How did my miner get hashes that were above the target?
There are some edge cases during network outage/reconnections, when proxy reconnects, but cgminer doesn't know about it. This ends up with sending garbled shares. I'm currently working on fix for proxy, should be available today.
December 02, 2012, 12:46:45 AM
Just updated GUI Miner to 11/18/12 version, and your site still says I'm not using stratum...is there anything else I need to change?
Should I be using OpenCL or CG?
2012-12-02 00:59:56: Listener for "Newer": 02/12/2012 00:59:56, started OpenCL miner on platform 0, device 0 (Cayman)
2012-12-02 00:59:56: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 00:59:56, checking for stratum...
2012-12-02 00:59:56: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 00:59:56, diverted to stratum on api-stratum.bitcoin.cz:3333
2012-12-02 01:00:06: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 01:00:06, Failed to subscribe
2012-12-02 01:00:08: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 01:00:08, IO errors - 1, tolerance 2
Should I be using OpenCL or CG?
2012-12-02 00:59:56: Listener for "Newer": 02/12/2012 00:59:56, started OpenCL miner on platform 0, device 0 (Cayman)
2012-12-02 00:59:56: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 00:59:56, checking for stratum...
2012-12-02 00:59:56: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 00:59:56, diverted to stratum on api-stratum.bitcoin.cz:3333
2012-12-02 01:00:06: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 01:00:06, Failed to subscribe
2012-12-02 01:00:08: Listener for "Newer": api2.bitcoin.cz:8332 02/12/2012 01:00:08, IO errors - 1, tolerance 2
December 01, 2012, 11:33:21 PM
Do I need to do anything different to make a stratum miner version of CGminer to work?
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
You don't need proxy for latest cgminer at all. cgminer has native support already. You need proxy only if you have more mining rigs on the same location and you want to use only one upstream connection to the pool.
Edit: You don't need to change any settings with latest cgminer, it will detect Stratum interface automatically on startup.
No matter if I enter the info manually with a blank config, or copy the config over, it doesn't connect.
December 01, 2012, 10:59:31 PM
Hey, so I recently switched over to Stratum mining. My rejects have gone down from 1% to 0.1% but it seems NMC mining is broken. Before I'd get ~0.02 NMC almost every round (no reward only once every 10-20 rounds); now, half of the rounds give me "none" NMC. Any ideas? Or is it just a crazy string of coincidences?
December 01, 2012, 04:59:57 PM
Interesting thing. I am using cgminer and things were going well but now I have had a tremendous increase in rejected shares.
stratum proxy from slush says:
2012-12-01 14:53:33,588 INFO proxy stratum_listener.submit # [153ms] Share from
'tinman951.-01' REJECTED: (-2, u'Share is above target', None)
2012-12-01 14:53:42,135 INFO proxy client_service.handle_event # New job 782d fo
r prevhash bb4d496c, clean_jobs=False
This log was recorded at 21:53 GMT/UCT timezone.
While CGminer (2.9.5-win.32) says about the same.
I quit the two and then restarted the proxy app (from slush) then cgminer. Seems to have fixed it. What was it about? How did my miner get hashes that were above the target?
stratum proxy from slush says:
2012-12-01 14:53:33,588 INFO proxy stratum_listener.submit # [153ms] Share from
'tinman951.-01' REJECTED: (-2, u'Share is above target', None)
2012-12-01 14:53:42,135 INFO proxy client_service.handle_event # New job 782d fo
r prevhash bb4d496c, clean_jobs=False
This log was recorded at 21:53 GMT/UCT timezone.
While CGminer (2.9.5-win.32) says about the same.
I quit the two and then restarted the proxy app (from slush) then cgminer. Seems to have fixed it. What was it about? How did my miner get hashes that were above the target?
December 01, 2012, 01:55:19 PM
I made minor website update:
* Worker list on profile page displays hashrate per worker (yay, let's celebrate!)
* Worker lists shows if worker is mining on Stratum interface
* Profile displays quite annoying deprecation warning when your miners are using getwork interface.
* Worker list on profile page displays hashrate per worker (yay, let's celebrate!)
* Worker lists shows if worker is mining on Stratum interface
* Profile displays quite annoying deprecation warning when your miners are using getwork interface.
December 01, 2012, 11:50:46 AM
Do I need to do anything different to make a stratum miner version of CGminer to work?
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
You don't need proxy for latest cgminer at all. cgminer has native support already. You need proxy only if you have more mining rigs on the same location and you want to use only one upstream connection to the pool.
Edit: You don't need to change any settings with latest cgminer, it will detect Stratum interface automatically on startup.
December 01, 2012, 10:16:10 AM
Do I need to do anything different to make a stratum miner version of CGminer to work?
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
I enter in the URL, same settings has cgminer 2.7.5 and any version with stratum support doesn't connect at all.
Enter "localhost" in the url, once the proxy program is running
Jump to: