### A ChainWorks Industries (CWI) Project - CWIgm | Simple Powerful Stable - page 51.

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: Reelly on July 31, 2017, 04:06:09 AM

Quote from: zorvalth on July 31, 2017, 03:49:42 AM

@chrysophylax
As I'm mining with only 4x1070, should i change to "lodiff - stratum+tcp://stratum.chainworksindustries.com:2000/" but i dont see a parameter for changing server as the default is connected to 6000?

x2 1070s and was auto pointed to the lodiff 2000 port.

yup ...

the next version will have a port parameter to be able to change it ... this version is fixed to the pool address and port 2000 ...

#crysx

Axionkt

newbie

Activity: 4

Merit: 0

I'm getting the following:
1080ti Aorus PL 80, Core +60, Mem -500 = 49.8-50.5 MH/s
1080ti MSI Gaming PL 60, Core +100, Mem -500 = 46.8-47.2 MH/s
1070 Gigabyte PL 90, Core +105, Mem -500 = 29.5-30.5 MH/s

This is great compared to other miners, no crashed so far in a few hours on 2 rigs.
However I am experiencing the same issue as others with the shares sending, after 1h30 I only send a share every 2 minutes.

Mapuo

hero member

Activity: 910

Merit: 1002

Quote from: droghtak on July 31, 2017, 05:29:43 AM

Quote from: droghtak on July 31, 2017, 04:32:07 AM

so far I'm getting 81.6MHs on a 1080ti + 1070

msi afterburner:
1070 running +180 / -502 PL 108% TL 80 FS 80% <-- 30Mhs
1080ti FE running at +175 / -502 PL 120% TL 84 FS 70% <-- 51.6MHs

this is using the x64 bits with -i 26

If I run the default intensity I get like 4 or 5MHs less

I have tried the x86 with -i 26 and my system crashed badly

x86 miner, same GPU settings but default intensity and it works faster than x64, like ~+3Mhs

16.08 for x64 vs 16.44 x86 1060 3GB default miner

zorvalth

full member

Activity: 223

Merit: 100

So far a few hours pretty stable on 4x1070.
Running all of them on 1850/4000 and 900mv.
26.5-6MH per card

droghtak

member

Activity: 75

Merit: 10

Quote from: droghtak on July 31, 2017, 04:32:07 AM

so far I'm getting 81.6MHs on a 1080ti + 1070

msi afterburner:
1070 running +180 / -502 PL 108% TL 80 FS 80% <-- 30Mhs
1080ti FE running at +175 / -502 PL 120% TL 84 FS 70% <-- 51.6MHs

this is using the x64 bits with -i 26

If I run the default intensity I get like 4 or 5MHs less

I have tried the x86 with -i 26 and my system crashed badly

x86 miner, same GPU settings but default intensity and it works faster than x64, like ~+3Mhs

john1010

hero member

Activity: 2100

Merit: 562

Quote from: chrysophylax on July 30, 2017, 09:37:41 AM

Quote from: john1010 on July 30, 2017, 09:04:54 AM

Look interesting, i will follow this thread, I hope i can get the solution here to my rx 500 series, Is it okay to use with a 5gpu's?

hi john1010 ...

as posted - the current miner is nvidia based only at the moment - and tested on the maxwell / pascal series cards so far ...

the amd cards are not yet supported by the miner ... that is a future development we are aiming at - tho will not eventuate for some time yet - as our beta testing module for CWIgm is for stability rather than hashrate for the time being ...

CWIgm 'should' cater for all the video cards your OS / video driver and BIOS can handle ...

but again - thats what this closed testing is all about ...

#crysx

Thanks for enlightment crysx Wink

normanski

member

Activity: 73

Merit: 10

0xE7a88dfc5045F689f7eDBB78481bAB719F0F65ba

nice project! I'll keep a watch on this. I hope to use your software soon.

alessandro10

newbie

Activity: 14

Merit: 0

Really good DEV,are dont have any interested to make bitcore timetravel miner DEV.?
i will really appreciated if you make bitcore miner

hanskan

full member

Activity: 336

Merit: 100

Is it normal that i get so few shares ?

http://imgur.com/a/tmb1P

With exact same clocks i get 28MH/s with this miner and 27MH/s with ccminer1.0

so thats like + 4%, which is awesome

EDIT - and WTH is it with so big difference with performance ? GPU2 and 0 go 46-46, others are 40-42 ??

droghtak

member

Activity: 75

Merit: 10

so far I'm getting 81.6MHs on a 1080ti + 1070

msi afterburner:
1070 running +180 / -502 PL 108% TL 80 FS 80% <-- 30Mhs
1080ti FE running at +175 / -502 PL 120% TL 84 FS 70% <-- 51.6MHs

this is using the x64 bits with -i 26

If I run the default intensity I get like 4 or 5MHs less

I have tried the x86 with -i 26 and my system crashed badly

helladave

newbie

Activity: 48

Merit: 0

getting a solid 23.38(first card) and 29.37 (2nd card) mh/s out of 2 980ti running the closed beta

Reelly

newbie

Activity: 10

Merit: 0

Quote from: zorvalth on July 31, 2017, 03:49:42 AM

@chrysophylax
As I'm mining with only 4x1070, should i change to "lodiff - stratum+tcp://stratum.chainworksindustries.com:2000/" but i dont see a parameter for changing server as the default is connected to 6000?

x2 1070s and was auto pointed to the lodiff 2000 port.

hanskan

full member

Activity: 336

Merit: 100

PM'd you

zorvalth

full member

Activity: 223

Merit: 100

@chrysophylax
As I'm mining with only 4x1070, should i change to "lodiff - stratum+tcp://stratum.chainworksindustries.com:2000/" but i dont see a parameter for changing server as the default is connected to 6000?

Mapuo

hero member

Activity: 910

Merit: 1002

Quote from: bluereinz on July 31, 2017, 02:14:53 AM

Quote from: Mapuo on July 31, 2017, 02:00:36 AM

Quote from: bluereinz on July 31, 2017, 01:16:55 AM

mining with asus gtx 1060 3gb, windows 10. i set the intensity to 24 at cwigm_x64 (same intensity with spmod3, same oc setting too). haven't try the intensity as i was busy with something else, probably gonna play with intensity later when i have free time. gonna post here later when i have the result. Wink

thx

24 is default intensity. I have 1060 3GB - it's ok with i24, driver crash at i25. +260 core +590 mem 812mv

at what power limit is ur setting? temperature?

Power limit is no matter. Locked voltage at 812mv.

Quote from: Mapuo on July 30, 2017, 03:24:04 PM

gtx 1060 3GB i24

Quote from: chrysophylax on July 31, 2017, 02:33:29 AM

Quote from: Mapuo on July 31, 2017, 02:00:36 AM

Quote from: bluereinz on July 31, 2017, 01:16:55 AM

mining with asus gtx 1060 3gb, windows 10. i set the intensity to 24 at cwigm_x64 (same intensity with spmod3, same oc setting too). haven't try the intensity as i was busy with something else, probably gonna play with intensity later when i have free time. gonna post here later when i have the result. Wink

thx

24 is default intensity. I have 1060 3GB - it's ok with i24, driver crash at i25. +260 core +590 mem 812mv

ok ...

so -i 25 will kill the driver ... which nvidia driver is installed? ... which brand of cards? ...

#crysx

Latest - 384.94, Win 7, Palit gtx 1060 dual 3GB hynix

Reelly

newbie

Activity: 10

Merit: 0

(x2) Galax GTX 1070 EXOC Sniper:

cwigm_x64:

50% Power Limit
+110 Core
= 25.32 MH/s / 25.24 MH/s

95w - 102w per card measured in NVIDIA Inspector (awating a wall metre for proper numbers).

cwigm_x86:

Same OC as above
= 25.99 MH/s / 26.06 MH/s

x86 appears to be ~ 0.75 MH/s (per card) faster than x64.

Running default .bat settings (apart from my own info).

20 minutes stable so far (just wanting to report in).
Will report back in 12 hours, sooner if necessary, but looking very stable.

Will have a Gigabyte GTX 970 G1 Gaming to test (hopefully) this week.

Thankyou very much for your work!

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

hi all ...

just thoughts ...

i think we need to list the default intensities and command parameters in the op soon - so as to set a default with which to work off ...

from feedback - CWIgm does NOT work with first generation maxwell cards by the looks of it - only gen2 cards ... which means firmware probably has a lot to do with it too ...

cards like gen2 750ti / 970 / 980 / 980ti - and all the newer pascal cards ( 10xx series ) - seem to work really well so far ...

there are a lot of others that have these earlier generation cards that have requested to test also - and we will be opening this closed beta to those also ... would be very interesting to see whether the older maxwell cards actually have the gusto to hash well - and what sort of hashrates / stability we get from them ...

#crysx

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: Mapuo on July 31, 2017, 02:00:36 AM

Quote from: bluereinz on July 31, 2017, 01:16:55 AM

mining with asus gtx 1060 3gb, windows 10. i set the intensity to 24 at cwigm_x64 (same intensity with spmod3, same oc setting too). haven't try the intensity as i was busy with something else, probably gonna play with intensity later when i have free time. gonna post here later when i have the result. Wink

thx

24 is default intensity. I have 1060 3GB - it's ok with i24, driver crash at i25. +260 core +590 mem 812mv

ok ...

so -i 25 will kill the driver ... which nvidia driver is installed? ... which brand of cards? ...

#crysx

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: ajeef1234 on July 31, 2017, 01:40:07 AM

need tribus algo

we are working on that ...

and a few other algos ... dunno which one we will implement next - but rest assured it will be the same reason we are testing this algo on CWIgm ...

#crysx

chrysophylax

legendary

Activity: 2912

Merit: 1091

--- ChainWorks Industries ---

Quote from: bluereinz on July 31, 2017, 01:16:55 AM

Quote from: chrysophylax on July 30, 2017, 11:58:04 PM

Quote from: bluereinz on July 30, 2017, 11:37:34 PM

Ran the beta miner for about an hour then crashed my computer, same settting with spmod3 (gpu +150, mem +500, 85% pl, i=24), slightly slower hashrates. Still have more room for improvement. Wink

Gonna wait for the next release.
Thx for the hardwork.

tanx for that ...

tho we dont know what your setup is for mining ... so its difficult to say why what when where or how

...

we cant help or know what 'could' be the issue without knowing miner setup - and os / app setup ...

the miner is set to max intensity as default ... which means IF you are using the miner on the same machine as the computer you use normally - then the intensity will more than likely end up locking your screen ( ie - killing the video session ) ... the default intensity for this algo is set at 24 or 25 currently - and by lowering it to an intensity that is feasible to run the miner AND your working session MAY give better stability results ...

but this is the usual issue we have encountered - and not by any means the sole issue that may be on your machine ... each computer has MANY factors involved - from video card driver versions to Windows versions to the updates that Windows has ... all play a part in this complex puzzle ...

your involvement with this is very helpful - as is your specifics ...

tanx again ...

#crysx

mining with asus gtx 1060 3gb, windows 10. i set the intensity to 24 at cwigm_x64 (same intensity with spmod3, same oc setting too). haven't try the intensity as i was busy with something else, probably gonna play with intensity later when i have free time. gonna post here later when i have the result. Wink

thx

nice ...

appreciate the testing ...

await your results ...

tanx ...

#crysx

Topic: ### A ChainWorks Industries (CWI) Project - CWIgm | Simple Powerful Stable - page 51. (Read 67732 times)