Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
Topic: A4 Dominator - Pre-Order Group Buy - 280mh, roughly 1000w, $1800 + shipping - page 44. (Read 122571 times)
November 07, 2016, 05:23:00 PM
November 07, 2016, 04:25:26 PM
Ive been waiting awhile for these to come out, but it looks as though the first batch is having a lot of problems. Has anyone heard from inno about having someone here having a look at it to see if it can be maximized further (i.e. as gentarkin did for the titans)?
Yes, Inno is aware and in this thread. They are currently working to open source the miner software. I think if we could get one of these in the hands of Gentarkin or some of the other code wizards they could pull it apart and sort it out. We just have to figure out how to make that happen.
Hopefully we will get some more updates from Inno for the software while we are trying to get community support on board for this miner.
November 07, 2016, 04:00:31 PM
Ive been waiting awhile for these to come out, but it looks as though the first batch is having a lot of problems. Has anyone heard from inno about having someone here having a look at it to see if it can be maximized further (i.e. as gentarkin did for the titans)?
November 07, 2016, 02:33:46 PM
Found some boards coming back in the logs.
I also hope this is a software problem.
Is it possible that communication between the boards and the raspberry is terrible(or wrong configuration) and causes the board to drop?
Code:
[2016-11-07 17:58:28] Reinit board (cs2)
[2016-11-07 17:58:28] spidev0.0(cs2): Found 20 A2 chips
[2016-11-07 17:58:28] Found chip 1 with 100 active cores
[2016-11-07 17:58:28] Found chip 2 with 100 active cores
[2016-11-07 17:58:28] Found chip 3 with 100 active cores
[2016-11-07 17:58:28] Found chip 4 with 100 active cores
[2016-11-07 17:58:28] Found chip 5 with 100 active cores
[2016-11-07 17:58:28] Found chip 6 with 100 active cores
[2016-11-07 17:58:28] Found chip 7 with 100 active cores
[2016-11-07 17:58:28] Found chip 8 with 100 active cores
[2016-11-07 17:58:28] Found chip 9 with 100 active cores
[2016-11-07 17:58:28] Found chip 10 with 100 active cores
[2016-11-07 17:58:28] Found chip 11 with 100 active cores
[2016-11-07 17:58:28] Found chip 12 with 100 active cores
[2016-11-07 17:58:28] Found chip 13 with 100 active cores
[2016-11-07 17:58:28] Found chip 14 with 100 active cores
[2016-11-07 17:58:28] Found chip 15 with 100 active cores
[2016-11-07 17:58:28] Found chip 16 with 100 active cores
[2016-11-07 17:58:28] Found chip 17 with 100 active cores
[2016-11-07 17:58:28] Found chip 18 with 100 active cores
[2016-11-07 17:58:28] Found chip 19 with 100 active cores
[2016-11-07 17:58:28] Found chip 20 with 100 active cores
[2016-11-07 17:58:28] Found 20 chips with total 2000 active cores
[2016-11-07 17:58:29] Accepted 035b2753 Diff 19.5K/8192 BA2 2 pool 0
[2016-11-07 17:58:29] Accepted 035b2753 Diff 19.5K/8192 BA2 2
[2016-11-07 17:58:29] Accepted 043a50a3 Diff 15.5K/8192 BA2 2 pool 0
[2016-11-07 17:58:29] Accepted 043a50a3 Diff 15.5K/8192 BA2 2
(5s):164.8M (avg):198.8Mh/s | A:1044480 R:0 WU:186784.7/m
[2016-11-07 17:58:30] Accepted 02c6a302 Diff 23.6K/8192 BA2 1 pool 0
[2016-11-07 17:58:30] Accepted 02c6a302 Diff 23.6K/8192 BA2 1
[2016-11-07 17:58:31] Accepted 0634dac1 Diff 10.6K/8192 BA2 1 pool 0
[2016-11-07 17:58:31] Accepted 0634dac1 Diff 10.6K/8192 BA2 1
[2016-11-07 17:58:32] Accepted 01b361ea Diff 38.5K/8192 BA2 0 pool 0
[2016-11-07 17:58:32] Accepted 01b361ea Diff 38.5K/8192 BA2 0
[2016-11-07 17:58:33] chip(cs2) 2: invalid nonce 0xde89c800
[2016-11-07 17:58:33] Accepted 01022d49 Diff 65K/8192 BA2 0 pool 0
[2016-11-07 17:58:33] Accepted 01022d49 Diff 65K/8192 BA2 0
[2016-11-07 17:58:33] Accepted 0732c416 Diff 9.1K/8192 BA2 0 pool 0
[2016-11-07 17:58:33] Accepted 0732c416 Diff 9.1K/8192 BA2 0
[2016-11-07 17:58:33] Network diff set to 30
[2016-11-07 17:58:33] Stratum from pool 0 detected new block
[2016-11-07 17:58:33] Reinit board (cs4)
(5s):173.8M (avg):198.6Mh/s | A:1085440 R:0 WU:191203.8/m
[2016-11-07 17:58:36] spidev0.0(cs4): Found 20 A2 chips
[2016-11-07 17:58:36] Found chip 1 with 98 active cores
[2016-11-07 17:58:36] Found chip 2 with 99 active cores
[2016-11-07 17:58:36] Found chip 3 with 99 active cores
[2016-11-07 17:58:36] Found chip 4 with 99 active cores
[2016-11-07 17:58:36] Found chip 5 with 99 active cores
[2016-11-07 17:58:36] Found chip 6 with 94 active cores
[2016-11-07 17:58:36] Found chip 7 with 99 active cores
[2016-11-07 17:58:36] Found chip 8 with 97 active cores
[2016-11-07 17:58:36] Found chip 9 with 98 active cores
[2016-11-07 17:58:36] Found chip 10 with 99 active cores
[2016-11-07 17:58:36] Found chip 11 with 99 active cores
[2016-11-07 17:58:36] Found chip 12 with 98 active cores
[2016-11-07 17:58:36] Found chip 13 with 98 active cores
[2016-11-07 17:58:36] Found chip 14 with 99 active cores
[2016-11-07 17:58:36] Found chip 15 with 99 active cores
[2016-11-07 17:58:36] Found chip 16 with 95 active cores
[2016-11-07 17:58:36] Found chip 17 with 99 active cores
[2016-11-07 17:58:36] Found chip 18 with 99 active cores
[2016-11-07 17:58:36] Found chip 19 with 99 active cores
[2016-11-07 17:58:36] Found chip 20 with 96 active cores
[2016-11-07 17:58:36] Found 20 chips with total 1962 active cores
[2016-11-07 17:58:38] chip(cs2) 4: invalid nonce 0xa3b1e700
[2016-11-07 17:58:38] Accepted 031d35c4 Diff 21K/8192 BA2 0 pool 0
[2016-11-07 17:58:38] Accepted 031d35c4 Diff 21K/8192 BA2 0
[2016-11-07 17:58:39] Accepted a932e209 Diff 99.2K/8192 BA2 1 pool 0
[2016-11-07 17:58:39] Accepted a932e209 Diff 99.2K/8192 BA2 1
(5s):166.0M (avg):197.9Mh/s | A:1101824 R:0 WU:191204.7/m
[2016-11-07 17:58:43] Network diff set to 30
[2016-11-07 17:58:43] Stratum from pool 0 detected new block
[2016-11-07 17:58:43] chip(cs2) 6: invalid nonce 0x58101100
[2016-11-07 17:58:43] Accepted b975d9b3 Diff 90.5K/8192 BA2 1 pool 0
[2016-11-07 17:58:43] Accepted b975d9b3 Diff 90.5K/8192 BA2 1
(5s):179.0M (avg):198.0Mh/s | A:1110016 R:0 WU:189877.7/m
[2016-11-07 17:58:45] Accepted 04e5d190 Diff 13.4K/8192 BA2 2 pool 0
[2016-11-07 17:58:45] Accepted 04e5d190 Diff 13.4K/8192 BA2 2
[2016-11-07 17:58:47] Accepted 0415b023 Diff 16K/8192 BA2 2 pool 0
[2016-11-07 17:58:47] Accepted 0415b023 Diff 16K/8192 BA2 2
[2016-11-07 17:58:48] Network diff set to 30
[2016-11-07 17:58:48] Stratum from pool 0 detected new block
[2016-11-07 17:58:49] Accepted 05f22e16 Diff 11K/8192 BA2 1 pool 0
[2016-11-07 17:58:49] Accepted 05f22e16 Diff 11K/8192 BA2 1
[2016-11-07 17:58:49] Accepted 0184cebe Diff 43.1K/8192 BA2 0 pool 0
[2016-11-07 17:58:49] Accepted 0184cebe Diff 43.1K/8192 BA2 0
(5s):184.2M (avg):197.9Mh/s | A:1142784 R:0 WU:192635.9/m
[2016-11-07 17:58:52] Accepted 069f0389 Diff 9.9K/8192 BA2 1 pool 0
[2016-11-07 17:58:52] Accepted 069f0389 Diff 9.9K/8192 BA2 1
[2016-11-07 17:58:52] Accepted 068856c6 Diff 10K/8192 BA2 1 pool 0
[2016-11-07 17:58:52] Accepted 068856c6 Diff 10K/8192 BA2 1
[2016-11-07 17:58:53] Network diff set to 30
[2016-11-07 17:58:53] Stratum from pool 0 detected new block
[2016-11-07 17:58:53] Reinit board (cs4)
[2016-11-07 17:58:53] spidev0.0(cs4): Found 20 A2 chips
[2016-11-07 17:58:53] Found chip 1 with 98 active cores
[2016-11-07 17:58:53] Found chip 2 with 99 active cores
[2016-11-07 17:58:53] Found chip 3 with 99 active cores
[2016-11-07 17:58:53] Found chip 4 with 99 active cores
[2016-11-07 17:58:53] Found chip 5 with 99 active cores
[2016-11-07 17:58:53] Found chip 6 with 94 active cores
[2016-11-07 17:58:53] Found chip 7 with 99 active cores
[2016-11-07 17:58:53] Found chip 8 with 97 active cores
[2016-11-07 17:58:53] Found chip 9 with 98 active cores
[2016-11-07 17:58:53] Found chip 10 with 99 active cores
[2016-11-07 17:58:53] Found chip 11 with 99 active cores
[2016-11-07 17:58:53] Found chip 12 with 98 active cores
[2016-11-07 17:58:53] Found chip 13 with 98 active cores
[2016-11-07 17:58:53] Found chip 14 with 99 active cores
[2016-11-07 17:58:53] Found chip 15 with 99 active cores
[2016-11-07 17:58:53] Found chip 16 with 95 active cores
[2016-11-07 17:58:53] Found chip 17 with 99 active cores
[2016-11-07 17:58:53] Found chip 18 with 99 active cores
[2016-11-07 17:58:53] Found chip 19 with 99 active cores
[2016-11-07 17:58:53] Found chip 20 with 96 active cores
[2016-11-07 17:58:53] Found 20 chips with total 1962 active cores
[2016-11-07 17:58:54] Accepted 84bc37cd Diff 126K/8192 BA2 1 pool 0
[2016-11-07 17:58:54] Accepted 84bc37cd Diff 126K/8192 BA2 1
(5s):182.2M (avg):197.6Mh/s | A:1167360 R:0 WU:194008.0/m
[2016-11-07 17:58:56] Accepted 0460fb42 Diff 15K/8192 BA2 0 pool 0
[2016-11-07 17:58:56] Accepted 0460fb42 Diff 15K/8192 BA2 0
[2016-11-07 17:58:56] Accepted 07cc8ef2 Diff 8.4K/8192 BA2 1 pool 0
[2016-11-07 17:58:56] Accepted 07cc8ef2 Diff 8.4K/8192 BA2 1
[2016-11-07 17:58:58] Accepted 04dcbee1 Diff 13.5K/8192 BA2 1 pool 0
[2016-11-07 17:58:58] Accepted 04dcbee1 Diff 13.5K/8192 BA2 1
[2016-11-07 17:58:58] Stratum from pool 0 detected new block
(5s):188.3M (avg):197.6Mh/s | A:1191936 R:0 WU:195378.5/m
[2016-11-07 17:59:01] Accepted 07cfab3d Diff 8.39K/8192 BA2 0 pool 0
[2016-11-07 17:59:01] Accepted 07cfab3d Diff 8.39K/8192 BA2 0
[2016-11-07 17:59:02] chip(cs2) 19: invalid nonce 0x0270aa00
[2016-11-07 17:59:02] Accepted 016f76fe Diff 45.7K/8192 BA2 1 pool 0
[2016-11-07 17:59:02] Accepted 016f76fe Diff 45.7K/8192 BA2 1
[2016-11-07 17:59:03] chip(cs3) 5: invalid nonce 0xc398ff00
(5s):193.6M (avg):197.7Mh/s | A:1208320 R:0 WU:195324.8/m
[2016-11-07 17:59:06] Accepted 0482a875 Diff 14.5K/8192 BA2 2 pool 0
[2016-11-07 17:59:06] Accepted 0482a875 Diff 14.5K/8192 BA2 2
[2016-11-07 17:59:08] Accepted 0247e1b6 Diff 28.7K/8192 BA2 2 pool 0
[2016-11-07 17:59:08] Accepted 0247e1b6 Diff 28.7K/8192 BA2 2
[2016-11-07 17:59:09] Accepted 02972cfb Diff 25.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:09] Accepted 02972cfb Diff 25.3K/8192 BA2 1
(5s):198.4M (avg):197.8Mh/s | A:1232896 R:0 WU:196594.3/m
[2016-11-07 17:59:11] Accepted 0300ab90 Diff 21.8K/8192 BA2 1 pool 0
[2016-11-07 17:59:11] Accepted 0300ab90 Diff 21.8K/8192 BA2 1
[2016-11-07 17:59:11] Accepted 1b1bd072 Diff 619K/8192 BA2 2 pool 0
[2016-11-07 17:59:11] Accepted 1b1bd072 Diff 619K/8192 BA2 2
[2016-11-07 17:59:11] chip(cs4) 17: invalid nonce 0x3d868d02
[2016-11-07 17:59:11] Accepted 441acffe Diff 246K/8192 BA2 0 pool 0
[2016-11-07 17:59:11] Accepted 441acffe Diff 246K/8192 BA2 0
(5s):200.6M (avg):197.9Mh/s | A:1257472 R:0 WU:197881.9/m
[2016-11-07 17:59:15] Accepted 070840b1 Diff 9.32K/8192 BA2 1 pool 0
[2016-11-07 17:59:15] Accepted 070840b1 Diff 9.32K/8192 BA2 1
[2016-11-07 17:59:19] chip(cs3) 9: invalid nonce 0xb2045104
(5s):202.9M (avg):198.0Mh/s | A:1265664 R:0 WU:196552.0/m
[2016-11-07 17:59:20] Network diff set to 30
[2016-11-07 17:59:20] Stratum from pool 0 detected new block
[2016-11-07 17:59:21] Accepted 0160d952 Diff 47.5K/8192 BA2 1 pool 0
[2016-11-07 17:59:21] Accepted 0160d952 Diff 47.5K/8192 BA2 1
[2016-11-07 17:59:21] chip(cs2) 5: invalid nonce 0x6bbc2300
[2016-11-07 17:59:22] chip(cs2) 6: invalid nonce 0x34e93d00
[2016-11-07 17:59:23] Accepted 05ff3750 Diff 10.9K/8192 BA2 0 pool 0
[2016-11-07 17:59:23] Accepted 05ff3750 Diff 10.9K/8192 BA2 0
[2016-11-07 17:59:24] Accepted 02f03bd2 Diff 22.3K/8192 BA2 2 pool 0
[2016-11-07 17:59:24] Accepted 02f03bd2 Diff 22.3K/8192 BA2 2
[2016-11-07 17:59:25] chip(cs3) 13: invalid nonce 0x0bffc800
(5s):201.2M (avg):198.0Mh/s | A:1290240 R:0 WU:197764.5/m
[2016-11-07 17:59:26] Network diff set to 30
[2016-11-07 17:59:26] Stratum from pool 0 detected new block
[2016-11-07 17:59:28] chip(cs4) 19: invalid nonce 0x5be24900
[2016-11-07 17:59:28] Accepted 01b369e2 Diff 38.5K/8192 BA2 0 pool 0
[2016-11-07 17:59:28] Accepted 01b369e2 Diff 38.5K/8192 BA2 0
[2016-11-07 17:59:30] chip(cs2) 17: invalid nonce 0xfd889f00
[2016-11-07 17:59:30] Network diff set to 30
[2016-11-07 17:59:30] Stratum from pool 0 detected new block
[2016-11-07 17:59:30] Reinit board (cs3)
[2016-11-07 17:59:30] spidev0.0(cs3): Found 20 A2 chips
[2016-11-07 17:59:30] Found chip 1 with 100 active cores
[2016-11-07 17:59:30] Found chip 2 with 100 active cores
[2016-11-07 17:59:30] Found chip 3 with 100 active cores
[2016-11-07 17:59:30] Found chip 4 with 100 active cores
[2016-11-07 17:59:30] Found chip 5 with 100 active cores
[2016-11-07 17:59:30] Found chip 6 with 100 active cores
[2016-11-07 17:59:30] Found chip 7 with 100 active cores
[2016-11-07 17:59:30] Found chip 8 with 100 active cores
[2016-11-07 17:59:30] Found chip 9 with 100 active cores
[2016-11-07 17:59:30] Found chip 10 with 100 active cores
[2016-11-07 17:59:30] Found chip 11 with 100 active cores
[2016-11-07 17:59:30] Found chip 12 with 100 active cores
[2016-11-07 17:59:30] Found chip 13 with 100 active cores
[2016-11-07 17:59:30] Found chip 14 with 100 active cores
[2016-11-07 17:59:30] Found chip 15 with 100 active cores
[2016-11-07 17:59:30] Found chip 16 with 100 active cores
[2016-11-07 17:59:30] Found chip 17 with 100 active cores
[2016-11-07 17:59:30] Found chip 18 with 100 active cores
[2016-11-07 17:59:30] Found chip 19 with 100 active cores
[2016-11-07 17:59:30] Found chip 20 with 100 active cores
[2016-11-07 17:59:30] Found 20 chips with total 2000 active cores
(5s):197.3M (avg):197.9Mh/s | A:1298432 R:0 WU:196467.2/m
[2016-11-07 17:59:31] Network diff set to 30
[2016-11-07 17:59:31] Stratum from pool 0 detected new block
[2016-11-07 17:59:32] Accepted 01d711ec Diff 35.6K/8192 BA2 0 pool 0
[2016-11-07 17:59:32] Accepted 01d711ec Diff 35.6K/8192 BA2 0
[2016-11-07 17:59:33] Accepted 07e5aba0 Diff 8.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:33] Accepted 07e5aba0 Diff 8.3K/8192 BA2 1
[2016-11-07 17:59:34] chip(cs2) 19: invalid nonce 0x1e7f8f00
(5s):190.4M (avg):197.7Mh/s | A:1314816 R:0 WU:196467.8/m
[2016-11-07 17:59:37] Accepted 0164c98e Diff 47K/8192 BA2 2 pool 0
[2016-11-07 17:59:37] Accepted 0164c98e Diff 47K/8192 BA2 2
[2016-11-07 17:59:38] Accepted 01f796f9 Diff 33.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:38] Accepted 01f796f9 Diff 33.3K/8192 BA2 1
[2016-11-07 17:59:39] Accepted 070edd9f Diff 9.29K/8192 BA2 0 pool 0
[2016-11-07 17:59:39] Accepted 070edd9f Diff 9.29K/8192 BA2 0
[2016-11-07 17:59:39] chip(cs4) 19: invalid nonce 0x8cbd6701
[2016-11-07 17:59:40] Accepted 0205216c Diff 32.4K/8192 BA2 0 pool 0
[2016-11-07 17:59:40] Accepted 0205216c Diff 32.4K/8192 BA2 0
(5s):195.4M (avg):197.7Mh/s | A:1347584 R:0 WU:198838.6/m
[2016-11-07 17:59:43] Accepted 04c61240 Diff 13.7K/8192 BA2 1 pool 0
[2016-11-07 17:59:43] Accepted 04c61240 Diff 13.7K/8192 BA2 1
(5s):198.5M (avg):197.8Mh/s | A:1355776 R:0 WU:197557.3/m
[2016-11-07 17:59:46] chip(cs4) 19: invalid nonce 0x9cd5cd02
[2016-11-07 17:59:46] chip(cs2) 6: invalid nonce 0x5066fc02
[2016-11-07 17:59:48] Shutdown signal received.
I also hope this is a software problem.
Is it possible that communication between the boards and the raspberry is terrible(or wrong configuration) and causes the board to drop?
November 07, 2016, 02:02:29 PM
I really hope this is just some sort of software issue and not a design flaw with the hardware.
I read that the max operating temp is 40c. I have not seen any run under 40c yetI am having better luck on litecoinpool using lower voltage settings like 804-805. If I go higher then 810 I get massive stale share which drops hashrate
November 07, 2016, 01:58:27 PM
I really hope this is just some sort of software issue and not a design flaw with the hardware.
November 07, 2016, 12:27:06 PM
These are some errors when the board dropping occurs.
Only board cs3 is found by cgminer and other board will eventually work or dropped after a long run time.
It seems that the spi bus fails to initiate the boards but im not sure.
Temperature is not the problem as the board run around 44C.
Only board cs3 is found by cgminer and other board will eventually work or dropped after a long run time.
It seems that the spi bus fails to initiate the boards but im not sure.
Temperature is not the problem as the board run around 44C.
Code:
[2016-11-07 23:18:48] Started cgminer 3.9.0
[2016-11-07 23:18:48] Run Reset=1
[2016-11-07 23:18:48] ST MCU hardware reset start
[2016-11-07 23:18:52] SPI Speed 4000 kHz
[2016-11-07 23:18:52] ST MCU - Enable (Pre-header)
[2016-11-07 23:18:52] Run temperature 35C
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] AUTO GPIO CS
&[2016-11-07 23:18:52] Failure(cs0)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:52] ACK(cs0) timeout:cmd_POWER_ON_BCAST-0.0620s
&[2016-11-07 23:18:55] Failure(cs0)(2): missing ACK for cmd 0x04
[2016-11-07 23:18:55] ACK(cs0) timeout:cmd_RESET_BCAST - 0.62 ms
&[2016-11-07 23:18:55] Failure(cs1)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:55] ACK(cs1) timeout:cmd_POWER_ON_BCAST-0.0574s
&[2016-11-07 23:18:58] Failure(cs1)(2): missing ACK for cmd 0x04
[2016-11-07 23:18:58] ACK(cs1) timeout:cmd_RESET_BCAST - 0.62 ms
&[2016-11-07 23:18:58] Failure(cs2)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:58] ACK(cs2) timeout:cmd_POWER_ON_BCAST-0.0548s
&[2016-11-07 23:19:01] Failure(cs2)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:01] ACK(cs2) timeout:cmd_RESET_BCAST - 0.71 ms
[2016-11-07 23:19:01] spidev0.0(cs3): Found 20 A2 chips
[2016-11-07 23:19:01] Found chip 1 with 100 active cores
[2016-11-07 23:19:01] Found chip 2 with 100 active cores
[2016-11-07 23:19:01] Found chip 3 with 100 active cores
[2016-11-07 23:19:01] Found chip 4 with 100 active cores
[2016-11-07 23:19:01] Found chip 5 with 100 active cores
[2016-11-07 23:19:01] Found chip 6 with 100 active cores
[2016-11-07 23:19:01] Found chip 7 with 100 active cores
[2016-11-07 23:19:01] Found chip 8 with 100 active cores
[2016-11-07 23:19:01] Found chip 9 with 100 active cores
[2016-11-07 23:19:01] Found chip 10 with 100 active cores
[2016-11-07 23:19:01] Found chip 11 with 100 active cores
[2016-11-07 23:19:01] Found chip 12 with 100 active cores
[2016-11-07 23:19:01] Found chip 13 with 100 active cores
[2016-11-07 23:19:01] Found chip 14 with 100 active cores
[2016-11-07 23:19:01] Found chip 15 with 100 active cores
[2016-11-07 23:19:01] Found chip 16 with 100 active cores
[2016-11-07 23:19:01] Found chip 17 with 100 active cores
[2016-11-07 23:19:01] Found chip 18 with 100 active cores
[2016-11-07 23:19:01] Found chip 19 with 100 active cores
[2016-11-07 23:19:01] Found chip 20 with 100 active cores
[2016-11-07 23:19:01] Found 20 chips with total 2000 active cores
[2016-11-07 23:19:01] PI(cs5) match the cg and dr
[2016-11-07 23:19:01] SPI(cs3) A1_SetA1Vol
& [2016-11-07 23:19:01] Failure(cs4)(2): missing ACK for cmd 0x02
[2016-11-07 23:19:01] ACK(cs4) timeout:cmd_POWER_ON_BCAST-0.0739s
& [2016-11-07 23:19:04] Failure(cs4)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:04] ACK(cs4) timeout:cmd_RESET_BCAST - 0.68 ms
& [2016-11-07 23:19:04] Failure(cs5)(2): missing ACK for cmd 0x02
[2016-11-07 23:19:04] ACK(cs5) timeout:cmd_POWER_ON_BCAST-0.0615s
& [2016-11-07 23:19:07] Failure(cs5)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:07] ACK(cs5) timeout:cmd_RESET_BCAST - 0.73 ms
[2016-11-07 23:19:07] A2 boards=1, active cores=2000, speed=47.76M
[2016-11-07 23:19:07] Tan total_devices : 1
[2016-11-07 23:19:07] Tan cs_cnt_error
[2016-11-07 23:19:07] Probing for an alive pool
[2016-11-07 23:19:07] Switching to pool 1 stratum+tcp://scrypt.eu.nicehash.com:3333 - first alive pool
[2016-11-07 23:19:07] Pool 0 stratum+tcp://scrypt.eu.nicehash.com:3333 alive, testing stability
[2016-11-07 23:19:07] Switching to pool 0 stratum+tcp://scrypt.eu.nicehash.com:3333
[2016-11-07 23:19:07] Pool 1 difficulty changed to 4096
[2016-11-07 23:19:07] Network diff set to 1.45K
[2016-11-07 23:19:07] Pool 0 difficulty changed to 4096
[2016-11-07 23:19:07] Stratum from pool 0 requested work restart
[2016-11-07 23:19:08] Failure(cs3)(40): missing ACK for cmd 0x02
[2016-11-07 23:19:08] ACK(cs3) timeout:cmd_POWER_ON_BCAST-0.2969s
[2016-11-07 23:19:08] Pool 2 difficulty changed to 4096
[2016-11-07 23:19:10] Accepted 02da27f6 Diff 23K/4096 BA2 0 pool 0
[2016-11-07 23:19:10] Accepted 02da27f6 Diff 23K/4096 BA2 0
November 07, 2016, 12:22:54 PM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.
UPDATE I just sent them a message.. I invited them to join this thread hopefully we will hear from them. I think this is a very good idea. Please everyone go and put in a request we will see if they can help.
They are here
https://getminera.com
Hello I'm the Minera's author. Can I know what's the problem with A4?
Then, what kind of miner software does it use?
If it can work with Cgminer or similar there isn't much problem, but if it has its own ultra-forked-wtf-you-did-miner I'm sorry I can't help much.
The miner uses cgminer 3.9.0
It is advertised to mine at 280Mhs and about the best we can get is 245-250mhs. And it will not mine on prohash.com where they coinswitch that seems to crash the miner all together. I am sure others will chime in that have done much more testing then I have but this is the jist of the problem. Thanks for stopping by we all hope someone can help here get some some good stable software going.
Well I'm not a miner software developer, so any kind of problem with it I can't do anything.
To add it to Minera instead you need only (if it's possible with the Cgminer version it has) to add the --api-allow option to be reachable by Minera controller and add it as "network miner", but you will not be able to manage it, only monitor.
November 07, 2016, 12:14:50 PM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.
UPDATE I just sent them a message.. I invited them to join this thread hopefully we will hear from them. I think this is a very good idea. Please everyone go and put in a request we will see if they can help.
They are here
https://getminera.com
Hello I'm the Minera's author. Can I know what's the problem with A4?
Then, what kind of miner software does it use?
If it can work with Cgminer or similar there isn't much problem, but if it has its own ultra-forked-wtf-you-did-miner I'm sorry I can't help much.
The miner uses cgminer 3.9.0
It is advertised to mine at 280Mhs and about the best we can get is 245-250mhs. And it will not mine on prohash.com where they coinswitch that seems to crash the miner all together. I am sure others will chime in that have done much more testing then I have but this is the jist of the problem.
The other thing is I do not know what type of control board this uses. It is a SD card the program runs on but the box that SD cards goes into is not a standard rasberry pi. It has 6 ribbon cable inputs that com from miner. Each miner has 2 hashing cards with 2 ribbon cables for output that need to plug into the control board that houses SD card. The idea is you can plug 3 miners into one control board.
November 07, 2016, 12:02:41 PM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.
UPDATE I just sent them a message.. I invited them to join this thread hopefully we will hear from them. I think this is a very good idea. Please everyone go and put in a request we will see if they can help.
They are here
https://getminera.com
Hello I'm the Minera's author. Can I know what's the problem with A4?
Then, what kind of miner software does it use?
If it can work with Cgminer or similar there isn't much problem, but if it has its own ultra-forked-wtf-you-did-miner I'm sorry I can't help much.
November 07, 2016, 11:51:03 AM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.
UPDATE I just sent them a message.. I invited them to join this thread hopefully we will hear from them. I think this is a very good idea. Please everyone go and put in a request we will see if they can help.
They are here
https://getminera.com
November 07, 2016, 09:35:49 AM
45 day warranty?!
...and their website is offline?!
that's pretty sketchy!
what are people's experiences regarding mining with this machine?
...and their website is offline?!
that's pretty sketchy!
what are people's experiences regarding mining with this machine?
go to http://innosilicon.com.cn they told me to use their chinese site until they get their english site back on
if you have a problem or wanna ask them just add them on skype (inno.miner)
November 07, 2016, 07:31:25 AM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.
November 07, 2016, 07:22:45 AM
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
November 07, 2016, 07:16:59 AM
November 07, 2016, 06:18:03 AM
Has anyone tried an A4 on LiteGuardien yet?
I remember a LOT of commentary when the Alcheminer (and it's OEM versions/clones) first showed up about it being VERY flaky on many pools but a couple (including LiteGuardian) let it run reliably even in the early software versions for it.
I remember a LOT of commentary when the Alcheminer (and it's OEM versions/clones) first showed up about it being VERY flaky on many pools but a couple (including LiteGuardian) let it run reliably even in the early software versions for it.
November 07, 2016, 04:01:44 AM
This rig is TOO NEW to be able to give any kind of real performance metrics ...
Thanks so much for the info!! I was also looking at the new? Bitmain Antminer S9, but apparently they're already out of stock?! Now I have no idea what to do :/
New Antminers are a waste of money, if you're going to buy one, buy one used as the difficulty on BTC is too high to make any real amount of money long term.
November 07, 2016, 03:53:13 AM
This rig is TOO NEW to be able to give any kind of real performance metrics ...
Thanks so much for the info!! I was also looking at the new? Bitmain Antminer S9, but apparently they're already out of stock?! Now I have no idea what to do :/
November 07, 2016, 03:30:57 AM
November 07, 2016, 01:28:51 AM
Ok, I have lost count, back to back crash and reboots all day long now. The settings in 1.0.2 is 815mv. I have not changed it. At this rate I will have to go back to the stock image. The 1.0.2 is more unstable than the first build from what I am seeing.
it's been suggested to try 825mv -- might give that a go.
That being said, over 9 hours now on Prohash without an issue here using 1.0.0T
I also have some miners from mfg batch 2 (built after 15th Oct) and these were originally on the V1.0.0T firmware. These miners are problematic. Originally I'd loose a card or two like everyone else which required monitoring and a manual restart, but with the V1.0.2 firmware Inno seem to have built in some kind of watcher (probably polling the cgminer api) which is killing and restarting cgminer whenever it sees a predefined trigger event or threshold breach. I can't keep one of these Batch 2 machines running for more than 30 minutes no matter what voltage I try, what diff I spec, nothing works.
Chloe has told me not to run the Batch 2 firmware (1.0.0T and 1.0.2) with the Batch 1 miners as the hardware is different but I did inadvertently tried Batch 1 firmware on the Batch 2 machines with zero luck so I'm guessing the inverse holds as well. Cgminer appears to start but reports 0Mhs or maxs out at 1.5 Mhs per card.
There's some changes with the latest batch 2 firmware (1.0.2) which suggest they made these changes to try and eek some more MHs out of them. First of all there's 2 new Mhz settings: 1224 and 1248. They've also lowered the max Mv setting from 860Mv to 850Mv. When I start one with 1248Mhz and 820Mv, it will run at 280-300Mhs for about 10 minutes maybe more, but in the end it restarts for no apparent reason.
Whatever they did to improve Mhs with Batch 2, they've also made them a lot less stable. It sucks big time, but I'm trying to stay cool and be patient.
Jump to: