Topic: A4 Dominator - Pre-Order Group Buy - 280mh, roughly 1000w, $1800 + shipping - page 5. (Read 122577 times)
May 10, 2017, 02:16:34 PM
I would leave at default 810 and then see. you getting 220 on which version. I am still on 2.0.2 but i don't mine on NH.
May 10, 2017, 01:11:59 PM
If you wanna update just because of Nicehash. There is 2.1 version available at NiceHash site.
What is the pool side hashrate for an A4 at Nicehash with this version? Im currently only getting about 220-240MHs on Nicehash.Also, any recomendations about voltages?
May 10, 2017, 01:03:46 PM
If you wanna update just because of Nicehash. There is 2.1 version available at NiceHash site.
May 10, 2017, 12:44:51 PM
If I install the new V2.0.3 image, what are the appropriate/validated voltages to set to minimize rebooting without stressing the HW?
May 08, 2017, 07:02:04 PM
Hey, I seem to be getting a stable 275 mhs on the miners control panel. Yet on every pool I've tried the mhs range from 180-300, staying mostly in the 230mhs are. The amount of coins I receive is also equivalent to 230mhs. Is there a problem with my miner? It's a temperature controlled environment, never overclocked or overvolted.
I appreciate any input someone may have
I appreciate any input someone may have
May 06, 2017, 12:35:05 PM
bought mine from https://www.eastshore.xyz/shop/litecoin-miner-a4-dominator-136-6mh-with-520w-ltc-miner/ 899 per tube. for 863 shipped before the price went up .
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
Have you recieved these. Might try these out with my other miners. Also are these flashed with the new 2.0 software? Thanks.
Yes to both question they are flashed you can use 203 or higher software and i did get it. eastshore cares a lot .... it's not some Fly by nite, ripe off re seller .....so far .
i m about to buy another tube or half A4 saving for it now ....I don't really care how good the L3 is, i hate bitmain after my bad S5 days and mining is also a hobby to me ..
April 28, 2017, 02:05:56 AM
Please tell me, this is the official e-mail - [email protected]
Hi, this e-mail is official, feel free to contact with her if any question.
April 26, 2017, 07:34:26 AM
Please tell me, this is the official e-mail - [email protected]
http://www.innosilicon.com/html/about/contact-us/Don't see it on contact list.
April 26, 2017, 06:20:25 AM
I got your points. What I mean is my a4 temp are depend on outside temp. My country, morning & mid-day temp is about 35-40*C, and cooler in evening & night (25-30*C). I want to know, what is the maximum temperature range A4 Miner can handle? Thanks for help. 
April 26, 2017, 05:07:38 AM
I dont know what the specifications are, but why do you have a wide diurnal fluctuation?
My A4's range between 50-55 all day. You do have them in a temperature controlled environment?
I suspect your AC is not rated for the BTU's the A4's generate.
Im using a 2-ton AC, and that seems to work well. I also use ducted air, really cheap at big-box hardware stores.
My A4's range between 50-55 all day. You do have them in a temperature controlled environment?
I suspect your AC is not rated for the BTU's the A4's generate.
Im using a 2-ton AC, and that seems to work well. I also use ducted air, really cheap at big-box hardware stores.
April 26, 2017, 04:47:43 AM
Hi everyone. I have got 3 a4 last week, these temperature is about 65-75C. The temp is going down 55-60 in the evening and night. Is it safe to run?
(sorry for my English)
(sorry for my English)
April 25, 2017, 02:17:18 AM
I recently bought a4 dominator.
orange pi controller is very unstable.
I can not use the latest firmware.
I had a bad pi and told them about it and they paid for a new one no problem. orange pi controller is very unstable.
I can not use the latest firmware.
April 25, 2017, 02:08:08 AM
I recently bought a4 dominator.
orange pi controller is very unstable.
I can not use the latest firmware.
orange pi controller is very unstable.
I can not use the latest firmware.
April 24, 2017, 05:18:46 AM
Here is my update post 2.0.3 installation update.
As of right now it looks like all of my problems have been resolved, no more reboots on Get Failures!
Before 2.0.3 I would have never been able to show you a screen capture like this that illustrates more than 10 days run time with anything other than 0 Get Failures because prior to 2.0.3, 1 get failure would make the miner reboot itself.
2.0.3 Can be found here https://www.dropbox.com/s/sis8eoeo6wxoqdv/G5-20-V2.0.3.zip?dl=0,
Note for those that are not aware, if you're running 2.0.2 you're already capable of running 2.0.3. If you're running a version that begins with 1.0.x or 0.0.x your miner must have a hardware reflash before 2.0.x will be supported.
As of right now it looks like all of my problems have been resolved, no more reboots on Get Failures!
Before 2.0.3 I would have never been able to show you a screen capture like this that illustrates more than 10 days run time with anything other than 0 Get Failures because prior to 2.0.3, 1 get failure would make the miner reboot itself.
2.0.3 Can be found here https://www.dropbox.com/s/sis8eoeo6wxoqdv/G5-20-V2.0.3.zip?dl=0,
Note for those that are not aware, if you're running 2.0.2 you're already capable of running 2.0.3. If you're running a version that begins with 1.0.x or 0.0.x your miner must have a hardware reflash before 2.0.x will be supported.
Hi, Eyedol
Glad to hear that your problem of the "reboot dance“ has been resolved with v2.0.3beta!
Here we want to send our gratitude to Jarrid and Ricardo, who spent no efforts in developping the software.
We hope that most A4 users can gain a lot from the sharply increase of LTC price!
Also we will keep working on providing better service to all of you.
Thanks,
Innosilicon A4 Support Team
April 23, 2017, 08:19:48 AM
bought mine from https://www.eastshore.xyz/shop/litecoin-miner-a4-dominator-136-6mh-with-520w-ltc-miner/ 899 per tube. for 863 shipped before the price went up .
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
Have you recieved these. Might try these out with my other miners. Also are these flashed with the new 2.0 software? Thanks.
April 23, 2017, 07:03:55 AM
Here is my update post 2.0.3 installation update.
As of right now it looks like all of my problems have been resolved, no more reboots on Get Failures!
Before 2.0.3 I would have never been able to show you a screen capture like this that illustrates more than 10 days run time with anything other than 0 Get Failures because prior to 2.0.3, 1 get failure would make the miner reboot itself.
2.0.3 Can be found here https://www.dropbox.com/s/sis8eoeo6wxoqdv/G5-20-V2.0.3.zip?dl=0,
Note for those that are not aware, if you're running 2.0.2 you're already capable of running 2.0.3. If you're running a version that begins with 1.0.x or 0.0.x your miner must have a hardware reflash before 2.0.x will be supported.
As of right now it looks like all of my problems have been resolved, no more reboots on Get Failures!
Before 2.0.3 I would have never been able to show you a screen capture like this that illustrates more than 10 days run time with anything other than 0 Get Failures because prior to 2.0.3, 1 get failure would make the miner reboot itself.
2.0.3 Can be found here https://www.dropbox.com/s/sis8eoeo6wxoqdv/G5-20-V2.0.3.zip?dl=0,
Note for those that are not aware, if you're running 2.0.2 you're already capable of running 2.0.3. If you're running a version that begins with 1.0.x or 0.0.x your miner must have a hardware reflash before 2.0.x will be supported.
April 17, 2017, 05:17:04 AM
After L3+ launch Innosilicon has to cut price in half.
Hi, the A4 is in stock now while L3+ can only be shipped after 3 month.
The early buyer already has made profit with our A4. Don't miss this golden opportunity to mine according to the current low hash power.
We are glad to help at any time.
April 13, 2017, 05:02:43 PM
After L3+ launch Innosilicon has to cut price in half.
April 07, 2017, 08:37:41 PM
bought mine from https://www.eastshore.xyz/shop/litecoin-miner-a4-dominator-136-6mh-with-520w-ltc-miner/ 899 per tube. for 863 shipped before the price went up .
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
http://www.innosilicon.com/html/a4-miner/ 1,600 USD
they have few in stock for about what they sell for on INNOSILICON site as 136 MH tubes .may be 200 more in the end you still pay the shipping i guess ... or do better direct buying .
shipping was 40 bucks everything taken care of they use ups which i was happy about i don't like FedEx
April 07, 2017, 04:00:45 PM
Anyone bought A4 from Inno recently. They still have that 270$ shipping rate for 1 miner?
I bought 5 in Jan and got a much better rate (<$100 ea.).
Suggest you see if you can create a small group buy in your region, or contact Dominique at Inno: [email protected] and ask her what she can do. I think 3 is the threshold where the rate drops significantly.
Jump to: