[ActiveMining] Official Shareholder Discussion Thread [Moderated] - page 196.

hazryder

full member

Activity: 208

Merit: 100

Quote from: Bargraphics on April 02, 2014, 11:21:46 AM

Alright Guys,

I received my two units (Ordered another one because of the voucher)

I thought these units were going to come with the USB Connector but they didn't so I have to wait another day to get them up and running.

By the way for anyone thinking about ordering them, you will need the following:

Port USB A Female Slot Plate Adapter (USBPLATE) - This comes with two (for two units)
http://www.amazon.com/gp/product/B0000511LW/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1

C&E 6-Feet USB 2.0 A Male to A Male Cable - You don't NEED 6 Ft but it was like $1.00 more for an extra 3 Ft.
http://www.amazon.com/gp/product/B00CJRV3CG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

Here are some pictures of the units that I have right now (To show proof of delivery)
http://imgur.com/a/Zqh6Q

I know there will still be some skeptics out there if I actually received these or not so let me know what to do that will be considered "proof" to you.

Depending on when Amazon delivers the USB cables tomorrow, I'll have them up and running hopefully!

Awesome, thanks for your post! I'm looking forward to seeing them up and running.

Bargraphics

hero member

Activity: 518

Merit: 500

Every man is guilty of all the good he did not do.

Alright Guys,

I received my two units (Ordered another one because of the voucher)

I thought these units were going to come with the USB Connector but they didn't so I have to wait another day to get them up and running.

By the way for anyone thinking about ordering them, you will need the following:

Port USB A Female Slot Plate Adapter (USBPLATE) - This comes with two (for two units)
http://www.amazon.com/gp/product/B0000511LW/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1

C&E 6-Feet USB 2.0 A Male to A Male Cable - You don't NEED 6 Ft but it was like $1.00 more for an extra 3 Ft.
http://www.amazon.com/gp/product/B00CJRV3CG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

Here are some pictures of the units that I have right now (To show proof of delivery)
http://imgur.com/a/Zqh6Q

I know there will still be some skeptics out there if I actually received these or not so let me know what to do that will be considered "proof" to you.

Depending on when Amazon delivers the USB cables tomorrow, I'll have them up and running hopefully!

Edit: I've been told for the USB to 5-Pin - The Red wire needs to go on Pin 1 (There's a little "1" next to it on the board) else it can cause burnouts if the header is installed backwards.

Komodorpudel

full member

Activity: 137

Merit: 100

In hopes that Ken reads it today:

Quote from: Komodorpudel on April 01, 2014, 04:00:18 PM

Ken; the message system from the shop still does not work!
When someone adds a message to an order; after a short time they still get an reply to theire email address:

"
This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

[email protected]
No Such User Here
"

damiano

legendary

Activity: 1246

Merit: 1000

103 days, 21 hours and 10 minutes.

Looking forward to the reviews and picutres

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: auto2nr1 on April 01, 2014, 04:48:40 PM

Quote from: kslaughter on April 01, 2014, 04:42:09 PM

Quote from: Technologov on April 01, 2014, 04:33:48 PM

Ken: Please allow selling hardware and manual pickup. This is important to improve customers confidence after huge shipping delays.
If I were to buy a miner, from a company that had delays (all of them, VMC, BFL, and Avalon), I would demand to physically take delivery and pay cash in-place. Or no deal.

Acquire the retail license you need.

-Technologov

If you pick up the product you will have to pay sales tax. 6.75% in Missouri.

So it is available now for pick up at your office in MO? Please confirm for those local buyers who wish to pick up product.

I asked this yesterday and was shut down, told it was not at their springfield office.

https://bitcointalksearch.org/topic/m.6020631

Bargraphics

hero member

Activity: 518

Merit: 500

Every man is guilty of all the good he did not do.

Quote from: BitcoinBaBa on April 02, 2014, 06:59:59 AM

It feels good to see the positivity restored here.
We still have a long way to go but things are moving forward in the right direction.Thanks Ken.

From going manic depressive over the relentless fud ,trolling, speculation,uncertainty to getting excited with in stock miners being shipped and being used for our own mining ,this has been one hell of a ride.

Am quite optimistic now and hoping to receive some good dividends coming trickling our way soon. Please get our shares up and trading.

Quote from: Bargraphics on April 01, 2014, 08:09:53 PM

My order status has been changed to Shipped.

And I've received tracking that states it has been picked up.

Now I wished I had picked Next Day Shipping from Amazon :/ Tongue

Have been waiting eagerly and patiently to see the miners in action for quite sometime .please do post some pics when you get them setup. Thanks.

I should for sure have them today (8:58 am At local FedEx facility), likely before my Amazon shipment gets here which is scheduled between 2:00pm and 6:00pm.

I'm EST timezone by the way so it is currently 9:15am

BitcoinBaBa

full member

Activity: 225

Merit: 100

It feels good to see the positivity restored here.
We still have a long way to go but things are moving forward in the right direction.Thanks Ken.

From going manic depressive over the relentless fud ,trolling, speculation,uncertainty to getting excited with in stock miners being shipped and being used for our own mining ,this has been one hell of a ride.

Am quite optimistic now and hoping to receive some good dividends coming trickling our way soon. Please get our shares up and trading.

Quote from: Bargraphics on April 01, 2014, 08:09:53 PM

My order status has been changed to Shipped.

And I've received tracking that states it has been picked up.

Now I wished I had picked Next Day Shipping from Amazon :/ Tongue

Have been waiting eagerly and patiently to see the miners in action for quite sometime .please do post some pics when you get them setup. Thanks.

snowdropfore

hero member

Activity: 843

Merit: 1001

Quote from: Bargraphics on April 01, 2014, 08:09:53 PM

My order status has been changed to Shipped.

And I've received tracking that states it has been picked up.

Now I wished I had picked Next Day Shipping from Amazon :/ Tongue

take some pics after you receive the amc miners. thank you.

Bargraphics

hero member

Activity: 518

Merit: 500

Every man is guilty of all the good he did not do.

My order status has been changed to Shipped.

And I've received tracking that states it has been picked up.

Now I wished I had picked Next Day Shipping from Amazon :/ Tongue

snowdropfore

hero member

Activity: 843

Merit: 1001

Quote from: MilkyWayMasta on April 01, 2014, 07:34:22 PM

Quote from: snowdropfore on April 01, 2014, 07:16:35 PM

Quote from: MilkyWayMasta on April 01, 2014, 03:16:51 PM

Quote from: damiano on April 01, 2014, 02:36:47 PM

Man I gotto say im fucking excited now

Where do you see the price headed? I'm very excited as well. I hope to see it blast past the ATH from BitFunder which was 0.0075 per share.

even if the share price is up at 0.0075,do you think there are enough buy orders at CT???

Not yet. The whole bitcoin investing community seems to be at a stand still until we get Colored Coins. BitFunder and Btct.co were much more exciting.. until they got shut down.

has anyone know about the colored coins's progress？？ the last time that i know the wallet is release..

MilkyWayMasta

full member

Activity: 221

Merit: 100

Quote from: snowdropfore on April 01, 2014, 07:16:35 PM

Quote from: MilkyWayMasta on April 01, 2014, 03:16:51 PM

Quote from: damiano on April 01, 2014, 02:36:47 PM

Man I gotto say im fucking excited now

Where do you see the price headed? I'm very excited as well. I hope to see it blast past the ATH from BitFunder which was 0.0075 per share.

even if the share price is up at 0.0075,do you think there are enough buy orders at CT???

Not yet. The whole bitcoin investing community seems to be at a stand still until we get Colored Coins. BitFunder and Btct.co were much more exciting.. until they got shut down.

snowdropfore

hero member

Activity: 843

Merit: 1001

Quote from: MilkyWayMasta on April 01, 2014, 03:16:51 PM

Quote from: damiano on April 01, 2014, 02:36:47 PM

Man I gotto say im fucking excited now

Where do you see the price headed? I'm very excited as well. I hope to see it blast past the ATH from BitFunder which was 0.0075 per share.

even if the share price is up at 0.0075,do you think there are enough buy orders at CT???

MilkyWayMasta

full member

Activity: 221

Merit: 100

Quote from: kleeck on April 01, 2014, 06:30:11 PM

Quote from: jimmothy on April 01, 2014, 04:35:22 PM

Quote from: MilkyWayMasta on April 01, 2014, 04:24:56 PM

I was replying to jimmothy, it looks like he thinks that pre-order customers are getting the product they pre-ordered but like you said, they are getting new product. Those old items don't and won't ever exist.

Didn't ken say they are still working on their own 28nm asic? Is this not what was available for preorder?

Jimmothy's confusion raises a good point, Ken. The website is confusing with all of the old offerings still listed with the old prices/specs. Can we get that cleaned up ASAP?

+1

kleeck

hero member

Activity: 532

Merit: 500

https://karatcoin.co

Quote from: jimmothy on April 01, 2014, 04:35:22 PM

Quote from: MilkyWayMasta on April 01, 2014, 04:24:56 PM

I was replying to jimmothy, it looks like he thinks that pre-order customers are getting the product they pre-ordered but like you said, they are getting new product. Those old items don't and won't ever exist.

Didn't ken say they are still working on their own 28nm asic? Is this not what was available for preorder?

Jimmothy's confusion raises a good point, Ken. The website is confusing with all of the old offerings still listed with the old prices/specs. Can we get that cleaned up ASAP?

auto2nr1

sr. member

Activity: 350

Merit: 250

Quote from: kslaughter on April 01, 2014, 04:42:09 PM

Quote from: Technologov on April 01, 2014, 04:33:48 PM

Ken: Please allow selling hardware and manual pickup. This is important to improve customers confidence after huge shipping delays.
If I were to buy a miner, from a company that had delays (all of them, VMC, BFL, and Avalon), I would demand to physically take delivery and pay cash in-place. Or no deal.

Acquire the retail license you need.

-Technologov

If you pick up the product you will have to pay sales tax. 6.75% in Missouri.

So it is available now for pick up at your office in MO? Please confirm for those local buyers who wish to pick up product.

kslaughter

sr. member

Activity: 476

Merit: 250

Quote from: Technologov on April 01, 2014, 04:33:48 PM

Ken: Please allow selling hardware and manual pickup. This is important to improve customers confidence after huge shipping delays.
If I were to buy a miner, from a company that had delays (all of them, VMC, BFL, and Avalon), I would demand to physically take delivery and pay cash in-place. Or no deal.

Acquire the retail license you need.

-Technologov

If you pick up the product you will have to pay sales tax. 6.75% in Missouri.

jimmothy

hero member

Activity: 770

Merit: 509

Quote from: MilkyWayMasta on April 01, 2014, 04:24:56 PM

I was replying to jimmothy, it looks like he thinks that pre-order customers are getting the product they pre-ordered but like you said, they are getting new product. Those old items don't and won't ever exist.

Didn't ken say they are still working on their own 28nm asic? Is this not what was available for preorder?

Technologov

full member

Activity: 203

Merit: 100

Ken: Please allow selling hardware and manual pickup. This is important to improve customers confidence after huge shipping delays.
If I were to buy a miner, from a company that had delays (all of them, VMC, BFL, and Avalon), I would demand to physically take delivery and pay cash in-place. Or no deal.

Acquire the retail license you need.

-Technologov

MilkyWayMasta

full member

Activity: 221

Merit: 100

I was replying to jimmothy, it looks like he thinks that pre-order customers are getting the product they pre-ordered but like you said, they are getting new product. Those old items don't and won't ever exist.

emkay47

member

Activity: 97

Merit: 10

Quote from: MilkyWayMasta on April 01, 2014, 04:14:21 PM

Quote from: jimmothy on April 01, 2014, 04:07:54 PM

Quote from: emkay47 on April 01, 2014, 04:04:29 PM

Quote from: jimmothy on April 01, 2014, 03:56:12 PM

Why would anyone keep a preorder for vmc brand asic instead of a hashfast?

Hashfast boards are now going for ~$3/gh

Vmc platinum miner is more than $10/gh

Because , I ordered from HashFast and Ken at the same time (November) , i am batch 3&4 on HashFast , And i will not be receiving anything before May . And from Ken , i will be mining this week , with 250% of power i ordered .

So , im glad i din't cancel or refunded my order .

I understand it would be a much better deal to go with the hashfast boards shipping now.

I am just wondering if there is any incentive to stick with the vmc asic instead.

As of now it seems like they are equal in power/efficiency only the vmc machine is 4 times more expensive and shipping in a few months.

Those are old miners I don't think they will ever be real products. What we have now is the Prospector and on the horizon is the Gold Rush miner which i believe is an optimized version of the Prospector. Those who held pre-orders for the old products will be receiving new products.

Ya i know , i meant equivalent hashing power , not exactly same design and stuff .

I will be receiving Prospector boards this week , from the stock saved for pre-ordered customers .

Topic: [ActiveMining] Official Shareholder Discussion Thread [Moderated] - page 196. (Read 629902 times)