[ActiveMining] The Official Active Mining Discussion Thread - page 185.

Stuartuk

sr. member

Activity: 266

Merit: 250

Quote from: ActiveMining-PR on August 05, 2013, 01:02:53 PM

Hello everyone, I have a small update to share. I Spoke with Ken this morning, and I wanted to pass along some information. Once the prototype arrives in Springfield, Ken will get some pictures for me to post to the community forum. Also, he is still working on a few problematic transfers, which he is trying to get finished. So if you are one of the very few people still waiting on shares to transfer, please hold tight, they are being processed.

Thanks for the update, look forward to the pics.

VolanicEruptor

sr. member

Activity: 392

Merit: 250

Quote from: ActiveMining-PR on August 05, 2013, 01:02:53 PM

Hello everyone, I have a small update to share. I Spoke with Ken this morning, and I wanted to pass along some information. Once the prototype arrives in Springfield, Ken will get some pictures for me to post to the community forum. Also, he is still working on a few problematic transfers, which he is trying to get finished. So if you are one of the very few people still waiting on shares to transfer, please hold tight, they are being processed.

100 Thanks st.

VolanicEruptor

sr. member

Activity: 392

Merit: 250

So why did you buy shares again?

iCEBREAKER

legendary

Activity: 2156

Merit: 1072

Crypto is the separation of Power and State.

Quote from: N_S on August 05, 2013, 12:11:21 PM

I'm wondering where iCEBREAKER is with his massive bowl of words he's eating...

I was asleep, good morning!

Did Cointerra and Open-Silicon magically go away because the other thing you preferred to talk instead about was just a rumor? No? Well you can pretend and shoot the messenger, as is your wont.

I'm flattered all you can discuss is me, even when given the chance to resume your insular groupthink.

Against all odds, I might have even taught you something!

So shoot your puny arrows, my reinforced double hull needed some new paint anyway. Grin

Thanks for the cheap shares sheeple. See you next shear! Wink

ActiveMining-PR

newbie

Activity: 27

Merit: 0

Hello everyone, I have a small update to share. I Spoke with Ken this morning, and I wanted to pass along some information. Once the prototype arrives in Springfield, Ken will get some pictures for me to post to the community forum. Also, he is still working on a few problematic transfers, which he is trying to get finished. So if you are one of the very few people still waiting on shares to transfer, please hold tight, they are being processed.

VolanicEruptor

sr. member

Activity: 392

Merit: 250

Quote from: zumzero on August 05, 2013, 12:50:16 PM

Looks like the icing got too thick for him. Tongue

zumzero

hero member

Activity: 602

Merit: 500

myBitcoin.Garden

Looks like the ice got too thick for him. Tongue

Panterino

member

Activity: 70

Merit: 10

Quote from: N_S on August 05, 2013, 12:11:21 PM

I'm wondering where iCEBREAKER is with his massive bowl of words he's eating...

lol

N_S

full member

Activity: 238

Merit: 100

I'm wondering where iCEBREAKER is with his massive bowl of words he's eating...

noah tall

full member

Activity: 524

Merit: 100

Quote from: Stuartuk on August 05, 2013, 11:24:21 AM

Quote from: Panterino on August 05, 2013, 11:16:19 AM

Quote from: Flashman on August 05, 2013, 11:06:54 AM

Quote from: iCEBREAKER on August 04, 2013, 09:31:32 PM

Is this also fake? Or will we be trotting a different excuse for disregarding the obvious implications?

Quote

http://www.cointerra.com/team/

Dr. Sherwani is the author of a textbook on Physical Design, which is widely used as the main textbook at major universities around the world. In addition, he has authored or co-authored three books and over 100 articles on various aspects of Physical Design Automation and ASICs.

The 28nm pool is getting crowded!

Well if the same textbook as every other ASIC project has been cribbing out of, no particular worries.

Those who can't do, teach.

So he teaches - and eASIC does. Nuff said.

Textbook in question was written in 1999.

http://www.amazon.com/Algorithms-Physical-Design-Automation-Third/dp/0792383931/ref=sr_1_1?s=books&ie=UTF8&qid=1375722524&sr=1-1&keywords=Sherwani

"...The goal of this book is to serve as a basis for the development of introductory-level graduate courses in VLSI physical design automation...."

Stuartuk

sr. member

Activity: 266

Merit: 250

Quote from: Panterino on August 05, 2013, 11:16:19 AM

Quote from: Flashman on August 05, 2013, 11:06:54 AM

Quote from: iCEBREAKER on August 04, 2013, 09:31:32 PM

Is this also fake? Or will we be trotting a different excuse for disregarding the obvious implications?

Quote

http://www.cointerra.com/team/

Dr. Sherwani is the author of a textbook on Physical Design, which is widely used as the main textbook at major universities around the world. In addition, he has authored or co-authored three books and over 100 articles on various aspects of Physical Design Automation and ASICs.

The 28nm pool is getting crowded!

Well if the same textbook as every other ASIC project has been cribbing out of, no particular worries.

Those who can't do, teach.

So he teaches - and eASIC does. Nuff said.

Panterino

member

Activity: 70

Merit: 10

Quote from: Flashman on August 05, 2013, 11:06:54 AM

Quote from: iCEBREAKER on August 04, 2013, 09:31:32 PM

Is this also fake? Or will we be trotting a different excuse for disregarding the obvious implications?

Quote

http://www.cointerra.com/team/

Dr. Sherwani is the author of a textbook on Physical Design, which is widely used as the main textbook at major universities around the world. In addition, he has authored or co-authored three books and over 100 articles on various aspects of Physical Design Automation and ASICs.

The 28nm pool is getting crowded!

Well if the same textbook as every other ASIC project has been cribbing out of, no particular worries.

Those who can't do, teach.

Flashman

hero member

Activity: 518

Merit: 500

Hodl!

Quote from: iCEBREAKER on August 04, 2013, 09:31:32 PM

Is this also fake? Or will we be trotting a different excuse for disregarding the obvious implications?

Quote

http://www.cointerra.com/team/

Dr. Sherwani is the author of a textbook on Physical Design, which is widely used as the main textbook at major universities around the world. In addition, he has authored or co-authored three books and over 100 articles on various aspects of Physical Design Automation and ASICs.

The 28nm pool is getting crowded!

Well if the same textbook as every other ASIC project has been cribbing out of, no particular worries.

canth

legendary

Activity: 1442

Merit: 1001

Quote from: VolanicEruptor on August 05, 2013, 10:04:00 AM

Quote from: Panterino on August 05, 2013, 09:56:26 AM

Share price is still depressed on BTCT

you call .0056 with a 3000 share ask wall before .006 "depressed"?
I could buy 3000 shares right now and make the price .006
I wipe my ASS with 3000 shares.

Heh...the bitcoin equivalent of lighting a cigar with a $100 bill - printing your cold wallet code and wiping your ass with it.

steveioio

member

Activity: 70

Merit: 10

Quote from: VolanicEruptor on August 05, 2013, 10:04:00 AM

Quote from: Panterino on August 05, 2013, 09:56:26 AM

Share price is still depressed on BTCT

you call .0056 with a 3000 share ask wall before .006 "depressed"?
I could buy 3000 shares right now and make the price .006
I wipe my ASS with 3000 shares.

lol

adub

full member

Activity: 171

Merit: 100

Changing avatars is currently not possible.

Quote from: lewicki on August 05, 2013, 10:10:13 AM

Quote from: adub on August 05, 2013, 10:04:28 AM

Does anyone remember the user name of the guy who was creating a new VMC logo? I want to talk to him about getting some work done for myself.

https://bitcointalksearch.org/topic/m.2788344

Thank you!

lewicki

sr. member

Activity: 294

Merit: 250

Quote from: adub on August 05, 2013, 10:04:28 AM

Does anyone remember the user name of the guy who was creating a new VMC logo? I want to talk to him about getting some work done for myself.

https://bitcointalksearch.org/topic/m.2788344

adub

full member

Activity: 171

Merit: 100

Changing avatars is currently not possible.

Does anyone remember the user name of the guy who was creating a new VMC logo? I want to talk to him about getting some work done for myself.

bigdude

hero member

Activity: 896

Merit: 500

Dolphins Finance TRUSTED FINANCE

awesome day to day Grin

sold some on the way down, bought before the rise.

free shares

VolanicEruptor

sr. member

Activity: 392

Merit: 250

Quote from: Panterino on August 05, 2013, 09:56:26 AM

Share price is still depressed on BTCT

you call .0056 with a 3000 share ask wall before .006 "depressed"?
I could buy 3000 shares right now and make the price .006
I wipe my ASS with 3000 shares.

Topic: [ActiveMining] The Official Active Mining Discussion Thread - page 185. (Read 479317 times)