LOl am I being ridiculous?
Yes - but this is how you get things done
Topic: [ActiveMining] The Official Active Mining Discussion Thread - page 304. (Read 479317 times)
Yes - but this is how you get things done
meh, where did that BTC10 wall @ 0.002490 (btc-tc) come from..
My response to Jeff:
LOl am I being ridiculous?
Quote
Your site actually did a story on the miners recently: http://thegenesisblock.com/amc-announces-4-8-ths-bitcoin-miners-for-3000-btc
There is not a working prototype, but what there is, is plenty of juicy information surrounding this. The NDA is on file with eASIC and we are just about to finish the NRE. Our code and design is complete already and all that is needed is the remaining funds to begin production of our 28nm chips. Below are a few good links pointing you to our progress on a thread I created at Bitcointalk.org
https://bitcointalksearch.org/topic/activemining-overview-and-speculation-thread-254930
Ken announces timeline for Klondike and Avalon clones, 3 and 6 weeks respectively: https://bitcointalksearch.org/topic/m.2751822
Here is the Engineering Firm quote for the machines that will host the incoming Avalon chips: http://axs.net/AMC/SB-Prototype-Quote.jpg
This is the eASIC chip NDA on file: http://axs.net/AMC/eAsic-NDA0001.jpg and http://axs.net/AMC/eAsic-NDA0002.jpg
Payment update for Klondike assembly (July 3rd): https://bitcointalksearch.org/topic/m.2647145
Important update on the Klondike assembly: https://bitcointalksearch.org/topic/m.2724773
Update to the dividend payment made on July 12th and the questions surrounding its amount: https://bitcointalksearch.org/topic/m.2715922
Picture of the office: https://bitcointalksearch.org/topic/m.2711010
Pictures of Springfield Underground data center: https://bitcointalksearch.org/topic/m.2640041
Update email regarding the prototypes from the engineers: https://bitcointalksearch.org/topic/m.2694708
eASIC articles:
http://www.easic.com/high-speed-transceivers-low-cost-power-fpga-nre-asic-45nm-easic-nextreme-2/easic-nextreme-2-fast-turnaround-asics-manufacturing/
http://www.eetimes.com/document.asp?doc_id=1316644
There is not a working prototype, but what there is, is plenty of juicy information surrounding this. The NDA is on file with eASIC and we are just about to finish the NRE. Our code and design is complete already and all that is needed is the remaining funds to begin production of our 28nm chips. Below are a few good links pointing you to our progress on a thread I created at Bitcointalk.org
https://bitcointalksearch.org/topic/activemining-overview-and-speculation-thread-254930
Ken announces timeline for Klondike and Avalon clones, 3 and 6 weeks respectively: https://bitcointalksearch.org/topic/m.2751822
Here is the Engineering Firm quote for the machines that will host the incoming Avalon chips: http://axs.net/AMC/SB-Prototype-Quote.jpg
This is the eASIC chip NDA on file: http://axs.net/AMC/eAsic-NDA0001.jpg and http://axs.net/AMC/eAsic-NDA0002.jpg
Payment update for Klondike assembly (July 3rd): https://bitcointalksearch.org/topic/m.2647145
Important update on the Klondike assembly: https://bitcointalksearch.org/topic/m.2724773
Update to the dividend payment made on July 12th and the questions surrounding its amount: https://bitcointalksearch.org/topic/m.2715922
Picture of the office: https://bitcointalksearch.org/topic/m.2711010
Pictures of Springfield Underground data center: https://bitcointalksearch.org/topic/m.2640041
Update email regarding the prototypes from the engineers: https://bitcointalksearch.org/topic/m.2694708
eASIC articles:
http://www.easic.com/high-speed-transceivers-low-cost-power-fpga-nre-asic-45nm-easic-nextreme-2/easic-nextreme-2-fast-turnaround-asics-manufacturing/
http://www.eetimes.com/document.asp?doc_id=1316644
LOl am I being ridiculous?
I just woke up and read through the thread.
And I have liquidated my AM to buy more shares.
And I have liquidated my AM to buy more shares.
@adub, look up "scientific notation".
@Vbs, maybe room for decimal form next revision?
@VolanicEruptor, one step ahead of you, glad so many agree though
Vbs needs to take that spreadsheet, change the cells for where the scientific notation is noted from General format to text. I understand he is probably using formulas throughout the excel sheet, but as generic text it should show it in proper decimal format.@Vbs, maybe room for decimal form next revision?
@VolanicEruptor, one step ahead of you, glad so many agree though
I received an email back from TGB and they basicaly said they want a working prototype
Quote
Thank you for bringing this to my attention. We're trying to limit posted hardware to products that have demonstrated prototypes in order to limit the performance and schedule risks. Has your team demonstrated a working prototype? If so I would be interested in seeing the details.
Cheers,
Jeff
Cheers,
Jeff
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
I already planned to If we all do this, we could have some pretty high volume today.
Who's with me?
I can't see price going down from here not back to 20 so today is the time to load up more if you ever want to.
Considerations for my timing:
1. Friedcat may release an announcement in the middle of next week, this announcement may cause a spike in AM share value, as FC's announcements often do. This would allow me to sell out at a nice peak.
2. I need to get my ActM shares BEFORE the sell wall falls. If Ken receives the money from pre-orders in the next three days he may take the sell wall down before it is purchased up, unleashing The Kraken.
3. I'd like to get the absolute best value from my investments, so I want to optimize my timing/share value during this phase of growth.
Decisions, decisions...
Obviously you make your own trading decisions but if it was me I'd be out of AM in a flash and into ACtM on todays news. Next week you might make 20-30% on AM if you time it very well but I'm expecting more gains over here in the next 7days. You can't predict the future but for sure trying to get out at the top and in at the bottom in any market is a very very difficult endeavor.
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
+1
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
+1
@adub, look up "scientific notation".
@Vbs, maybe room for decimal form next revision?
@VolanicEruptor, one step ahead of you, glad so many agree though
@Vbs, maybe room for decimal form next revision?
@VolanicEruptor, one step ahead of you, glad so many agree though
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
This is an excellent idea. Even purely from a selfish perspective, the odds of a spike above 0.0025 soon (in the next 3 days) are very high. It's also reasonable to assume we might not come back down to 0.0025.
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
+1
Same thought
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
+1
I'll be re-investing my dividends today into more shares.
If we all do this, we could have some pretty high volume today.
Who's with me?
If we all do this, we could have some pretty high volume today.
Who's with me?
What does "2.70E-05" mean?
2.70 * 10^-5
or
divide 2.70 by 10^5
or
divide 2.70 by 100000
or
take the decimal place in 2.70 and move 5 places to the left
So I purchased 400 Shares of this stock on BitFunder kind of on a whim and the price was so low and the Profile sounded pretty good.
Is this stock really expected to grow well and pay good Div's in the near future???
Is this stock really expected to grow well and pay good Div's in the near future???
I can't see price going down from here not back to 20 so today is the time to load up more if you ever want to.
Considerations for my timing:
1. Friedcat may release an announcement in the middle of next week, this announcement may cause a spike in AM share value, as FC's announcements often do. This would allow me to sell out at a nice peak.
2. I need to get my ActM shares BEFORE the sell wall falls. If Ken receives the money from pre-orders in the next three days he may take the sell wall down before it is purchased up, unleashing The Kraken.
3. I'd like to get the absolute best value from my investments, so I want to optimize my timing/share value during this phase of growth.
Decisions, decisions...
I'm buying more as well.
Ken - do we get some kind of estimate or announcement as to when sell wall goes down? Or are you just going to pull it?
Ken - do we get some kind of estimate or announcement as to when sell wall goes down? Or are you just going to pull it?
It will be announced in the this thread right before the wall goes down.
Are we getting closer to this event? It'd be nice to have more of a heads-up than a post on a forum we may or may not be watching. So far we've done our own math to figure out how close we are to the NRE, can you confirm that in three days you should have the total NRE and at that point you will pull the wall down?
No, I can't at the point.
Fair enough.
Jump to: