Pages:
Author

Topic: [ActiveMining] The Official Active Mining Discussion Thread [Self-Moderated] - page 5. (Read 771288 times)

full member
Activity: 209
Merit: 101
FUTURE OF CRYPTO IS HERE!
It would have to be a redesign, but not much of one.

I am slightly wondering about the chip dimensions. You have stated that ActiveMining chip package dimensions are going to be 11mmx11mm. However I believe bitfury chip package dimensions are 7mmx7mm. The board seems fairly tightly packed with the 7x7mm chips. If you increase the size of package you would have to decrease the number of rows and columns of chips to make them fit. So I do not understand how this could be not much of a redesign as basically everything changes.

The board is legit, it IS for bitfury chips and I know the 55nm chips will have a similar packaging.

I am also a bit wondering how you can know that 11mmx11mm chips are similar than 7mmx7mm chips?
legendary
Activity: 1904
Merit: 1007
So someone please out this as a scam already and let's be done with it.

If there is anyone out there with a difinitive answer please chime in... Bargraphics?

It's not a scam,

Ken goofed (Which honestly I don't know how as those chips are OBVIOUSLY bitfury)

The board is legit, it IS for bitfury chips and I know the 55nm chips will have a similar packaging.

The Engineering team has working custom bitfury boards, the same design will likely be used for ActM's 55nm chips


At this point there's two options.

You either believe the trolls who have never met with Ken or the Engineering team that he hired/bought the IP from.

Or you join up in #ActM and get real information from someone who actually flew to California and met with Greg / People's ASIC and happened to fly to Missouri and met with Ken.

The trolls will try to make this black and white and it's not. Ken is obviously not listening to the engineering company or letting them tell him what to say because saying these are BFL chips is absurd. I have total faith that Ken from this point forward will consult with his engineering team before posting on here and clarify his misunderstanding

Why do you come here to defend ken? He should apologize for the mistake invoking being tired doing hard work for his company. But he didn't. Instead he is busy deleting posts from here and coming up with more lies instead of real tangible proofs.
newbie
Activity: 42
Merit: 0
Why are we over analyzing pictures of a chip that we know hasn't been spun yet.

Ken has said on multiple occasions that they opted to not go for a small sample run and instead have placed a full order. That schedule has been released you know there are no chips yet so why all of the concern over what must be some stock photo.

Because

...
This is a board that our engineer designed and those are BFL chips.  ...

If Ken said it was a stock image, it would have ended right there.
He didn't - he said the board was made by the "stealth startup" that he allegedly bought.

But he fucked up, not knowing dick about electronics in general, and ASICs in particular.

The chips aren't BFL, they're BitFury.  Ken can't even lie right.

If Ken actually had engineers to advise him, he wouldn't make such laughable blunders.  The guy is not just a scammer, he's an incompetent scammer.

So someone please out this as a scam already and let's be done with it.

If there is anyone out there with a difinitive answer please chime in... Bargraphics?

It's not a scam,

Ken goofed (Which honestly I don't know how as those chips are OBVIOUSLY bitfury)
...

http://s30.postimg.org/a0rqxlja9/miracles.jpg
  Bargraphics.  He'll Take You There!
sr. member
Activity: 448
Merit: 250
The recurrence of poor spelling, creative capitalization and insider information makes me think this is another kslaugher sockpuppet.

This is the guy that did the interview with Ken.

Everyone who is serious, and actually holds actm shares, join #ActM on IRC - we make a lot more sense there and discuss/debate things rationally.
member
Activity: 70
Merit: 10
So someone please out this as a scam already and let's be done with it.

If there is anyone out there with a difinitive answer please chime in... Bargraphics?

It's not a scam,

Ken goofed (Which honestly I don't know how as those chips are OBVIOUSLY bitfury)

The board is legit, it IS for bitfury chips and I know the 55nm chips will have a similar packaging.

The Engineering team has working custom bitfury boards, the same design will likely be used for ActM's 55nm chips


At this point there's two options.

You either believe the trolls who have never met with Ken or the Engineering team that he hired/bought the IP from.

Or you join up in #ActM and get real information from someone who actually flew to California and met with Greg / People's ASIC and happened to fly to Missouri and met with Ken.

The trolls will try to make this black and white and it's not. Ken is obviously not listening to the engineering company or letting them tell him what to say because saying these are BFL chips is absurd. I have total faith that Ken from this point forward will consult with his engineering team before posting on here and clarify his misunderstanding

For those  who may not be aware, there is also a new self moderated ActM thread that is successfully being kept free from troll posts while not stifling discussion.  Smiley

https://bitcointalksearch.org/topic/activemining-official-shareholder-discussion-thread-moderated-462370
newbie
Activity: 56
Merit: 0
hero member
Activity: 518
Merit: 500
Every man is guilty of all the good he did not do.
So someone please out this as a scam already and let's be done with it.

If there is anyone out there with a difinitive answer please chime in... Bargraphics?

It's not a scam,

Ken goofed (Which honestly I don't know how as those chips are OBVIOUSLY bitfury)

The board is legit, it IS for bitfury chips and I know the 55nm chips will have a similar packaging.

The Engineering team has working custom bitfury boards, the same design will likely be used for ActM's 55nm chips


At this point there's two options.

You either believe the trolls who have never met with Ken or the Engineering team that he hired/bought the IP from.

Or you join up in #ActM and get real information from someone who actually flew to California and met with Greg / People's ASIC and happened to fly to Missouri and met with Ken.

The trolls will try to make this black and white and it's not. Ken is obviously not listening to the engineering company or letting them tell him what to say because saying these are BFL chips is absurd. I have total faith that Ken from this point forward will consult with his engineering team before posting on here and clarify his misunderstanding
newbie
Activity: 56
Merit: 0
Why are we over analyzing pictures of a chip that we know hasn't been spun yet.

Ken has said on multiple occasions that they opted to not go for a small sample run and instead have placed a full order. That schedule has been released you know there are no chips yet so why all of the concern over what must be some stock photo.

Because

...
This is a board that our engineer designed and those are BFL chips.  ...

If Ken said it was a stock image, it would have ended right there.
He didn't - he said the board was made by the "stealth startup" that he allegedly bought.

But he fucked up, not knowing dick about electronics in general, and ASICs in particular.

The chips aren't BFL, they're BitFury.  Ken can't even lie right.

If Ken actually had engineers to advise him, he wouldn't make such laughable blunders.  The guy is not just a scammer, he's an incompetent scammer.
member
Activity: 106
Merit: 10
Why are we over analyzing pictures of a chip that we know hasn't been spun yet.

Ken has said on multiple occasions that they opted to not go for a small sample run and instead have placed a full order. That schedule has been released you know there are no chips yet so why all of the concern over what must be some stock photo.

All of you who keep calling this a scam need to step back and review the risk of an investment. There is never a guarantee that your investment will return a profit. You might yet loose money in this... that remains to be seen. But a failed investment doesn't make it a scam regardless of how sure you were of the investment.

hero member
Activity: 658
Merit: 500
decentralize EVERYTHING...
So someone please out this as a scam already and let's be done with it.

If there is anyone out there with a difinitive answer please chime in... Bargraphics?
newbie
Activity: 42
Merit: 0
So, Bargraphics is taking an active role in this scam.  Guess the Terrahash thing paid off well.

Wundershill starts #actm, an invite-only irc chan.

If you cannot get into #ActM then register an account on IRC - http://www.afterdawn.com/tech_support/answer.cfm/can_i_register_my_nick_on_an_irc_network
and PM me on forums to prove you are who you say you are
Once you are invited you will remain invited

What's particularly jaw-dropping is folks are willingly going there.  Lambs to the Slaughter Smiley

sr. member
Activity: 280
Merit: 250
TECHNOLOGY, BABY!
$3/GH/s just for chips, with delivery in two months? That's a little steep considering the chips are untested, and you can get chips that will give the same $/GH/s and J/GH numbers with immediate shipment and have a whole host of tested designs available.

You are forgetting ActM intellihash™©® chips will mine $5000/BTC bitcoins, all the rest mine coins worth closer to $500.

This is why I keep coming back to this thread, at least sometimes someone can amuse me while I watch my ROI become further and further out of reach...
newbie
Activity: 56
Merit: 0
Wow can no one see that the image of the board and chips that is posted that you guys are so wildly claiming as that pic quality don't exist any more is of a smaller image BLOWN up to a Very much larger scale and that is why the Quality of the image was so drastically reduced
...

If anyone cares to see the True clear image then check out the Chip Sale link and you can see the UN-blurred Image
BYE BYE

Hey, thanks.

Didn't see that one.  This one makes it perfectly clear that Ken is lying like a rug.

http://s11.postimg.org/6zxtmngcj/kenfraud.jpg

This is a BitFury chip (see inset image, everything *down to the package markings* matches).
The board also has no voltage regulation, probably going for the daisy chain power scheme possible with BitFury chips.  That had high failure rates and was abandoned AFAIK, but i haven't followed it, so not sure.  

Ken's total ignorance in electronics really hobbles his lying here.

0/10.  Do.Not.Want.
legendary
Activity: 980
Merit: 1040
$3/GH/s just for chips, with delivery in two months? That's a little steep considering the chips are untested, and you can get chips that will give the same $/GH/s and J/GH numbers with immediate shipment and have a whole host of tested designs available.

You are forgetting ActM intellihash™©® chips will mine $5000/BTC bitcoins, all the rest mine coins worth closer to $500.
legendary
Activity: 1176
Merit: 1015
Also please prove to us you control an address with 1000+ bitcoin.

If you can't do this it means you spent all that bitcoin buying 'people's ASIC'.

legendary
Activity: 1176
Merit: 1015
Some loser just paid 0.0005 for 7 shares. Perhaps Ken trying to inspire confidence?

Ken, you said that you are using the million dollars paid to eASIC as part of the new 28 custom but also say that you're looking for other vendors too. So if you choose another vendor that isn't eASIC do they give you the money back?

Please be clear.
sr. member
Activity: 378
Merit: 250
Are you stupid? Any claims of fraud and misrepresentation are completely valid right now, anyone arguing that this isn't bullshit is a liar.

For the claim to not be false, these people would have to have their money back.
sr. member
Activity: 350
Merit: 250
Co-Owner Of DCMCo-Op Mining Farm at 3.5 th/s
Wow can no one see that the image of the board and chips that is posted that you guys are so wildly claiming as that pic quality don't exist any more is of a smaller image BLOWN up to a Very much larger scale and that is why the Quality of the image was so drastically reduced



If anyone cares to see the True clear image then check out the Chip Sale link and you can see the UN-blurred Image


So get real VE and Grow up and Act like a man and not a Butt hurt 2 year old and calling in False Reports to the Mo Div of Sec.

Because you do know that when they clear him of your False Claims, that you can Be arrested for Filing a False Report to a State Agency, I hope you took that into account when you called the false claims in.


Also by filing the false claims you also opened your Self up to Lawsuit for Deformation of Character and Slander, Not to mention also when they clear him they will be providing ken with a full report of all the info they have on their investigation of the person who made the reports to them and the persons Personal info also......... So BEWARE VE I see LOTS of Legal trouble in your Future esp if ken lets them know about your death threats you made against his life and the fact that he can back them up with proof from this Forum


Enjoy your Time in jail and pending lawsuits you will most likely be facing


BYE BYE
sr. member
Activity: 392
Merit: 250


Those are BFL Chips and...




that is a bitfury


legendary
Activity: 1176
Merit: 1015
Remember I said if we aren't hashing by end of November that means things are going wrong or its a scam and we might as well accept the end. I was right. The only shame is that it was before the end of November that Ken blocked our shares.
Pages:
Jump to: