AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 5.

exsexs1

newbie

Activity: 31

Merit: 0

Quote from: MajedPro on October 28, 2020, 09:34:41 AM

Vega64 flashed with Vega56 bios

using theses timings
--CL 20 --RAS 26 --RCDRD 12 --RCDWR 12 --RC 38 --RP 12 --RRDS 3 --RRDL 5 --RTP 6 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 13 --REF 24000 --RFC 239

Core 1097Mhz / 825mV
Mem 1028Mhz

you can get 54.5Mh/s solid ethereum hashrate at 115w to 130w depending on your model!

I have Vega 56 with 64 BIOS, 6xSapphire REF cards with samsung RAM. If I put Mem over 960 teamred is freeze and restart. SocMhz jump from 960 to 1107, but I can't set in HiveOs. I think SocMhz will be max 1028.

Core 970, 840mv
Mem 960, 800mv
I get 45Mhs ~100W

using these timings:
--CL 20 --RAS 20 --RCDRD 11 --RCDWR 12 --RC 43 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --RE
F 65535 --RFC 248

If I put RC value under 42, ETH MHS growing up, but imediatly crashed.
Any better timings to these REF cards?!

dejvic

newbie

Activity: 6

Merit: 0

Quote from: miner29 on December 18, 2020, 05:46:55 PM

Quote from: dejvic on December 18, 2020, 05:37:15 PM

Quote from: miner29 on December 18, 2020, 05:01:29 PM

Quote from: dejvic on December 18, 2020, 02:22:14 PM

Quote from: miner29 on December 18, 2020, 12:54:35 PM

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

thank you. Have you got the same cards (Sapphire Radeon NITRO Vega 56 8G, Hynix)?
I cant set mem 1020, my max is 830 and core 1100.

Ive got some with Hynix and some with Samesung. What are you using to set your clocks? I use linux and can set without issue. If on windows make the mem 1/2 or 510. Linux is 2x mem of windows.

i have RaveOS. (is the same as HiveOS)
www.raveos.com

and my settings - core 1100, memclock 810-850, core vol 800-875, mem vol 800-875
but max hashrate is 45mh/s

Does it have an entry field and slider or just slider? If entry field you can try to enter the value. At worst requires a reboot of rig if it doesnt like it.

I have 6 cards, and this is values from-till... Do you unterestand?

miner29

full member

Activity: 1275

Merit: 141

Quote from: dejvic on December 18, 2020, 05:37:15 PM

Quote from: miner29 on December 18, 2020, 05:01:29 PM

Quote from: dejvic on December 18, 2020, 02:22:14 PM

Quote from: miner29 on December 18, 2020, 12:54:35 PM

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

thank you. Have you got the same cards (Sapphire Radeon NITRO Vega 56 8G, Hynix)?
I cant set mem 1020, my max is 830 and core 1100.

Ive got some with Hynix and some with Samesung. What are you using to set your clocks? I use linux and can set without issue. If on windows make the mem 1/2 or 510. Linux is 2x mem of windows.

i have RaveOS. (is the same as HiveOS)
www.raveos.com

and my settings - core 1100, memclock 810-850, core vol 800-875, mem vol 800-875
but max hashrate is 45mh/s

Does it have an entry field and slider or just slider? If entry field you can try to enter the value. At worst requires a reboot of rig if it doesnt like it.

dejvic

newbie

Activity: 6

Merit: 0

Quote from: miner29 on December 18, 2020, 05:01:29 PM

Quote from: dejvic on December 18, 2020, 02:22:14 PM

Quote from: miner29 on December 18, 2020, 12:54:35 PM

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

thank you. Have you got the same cards (Sapphire Radeon NITRO Vega 56 8G, Hynix)?
I cant set mem 1020, my max is 830 and core 1100.

Ive got some with Hynix and some with Samesung. What are you using to set your clocks? I use linux and can set without issue. If on windows make the mem 1/2 or 510. Linux is 2x mem of windows.

i have RaveOS. (is the same as HiveOS)
www.raveos.com

and my settings - core 1100, memclock 810-850, core vol 800-875, mem vol 800-875
but max hashrate is 45mh/s

miner29

full member

Activity: 1275

Merit: 141

Quote from: dejvic on December 18, 2020, 02:22:14 PM

Quote from: miner29 on December 18, 2020, 12:54:35 PM

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

thank you. Have you got the same cards (Sapphire Radeon NITRO Vega 56 8G, Hynix)?
I cant set mem 1020, my max is 830 and core 1100.

Ive got some with Hynix and some with Samesung. What are you using to set your clocks? I use linux and can set without issue. If on windows make the mem 1/2 or 510. Linux is 2x mem of windows.

dejvic

newbie

Activity: 6

Merit: 0

Quote from: miner29 on December 18, 2020, 12:54:35 PM

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

thank you. Have you got the same cards (Sapphire Radeon NITRO Vega 56 8G, Hynix)?
I cant set mem 1020, my max is 830 and core 1100.

miner29

full member

Activity: 1275

Merit: 141

Quote from: dejvic on December 18, 2020, 08:47:27 AM

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Try

ras 26 / rcdrd 12 / rcdwr 12 / rc 38 / rp 12 / rrds 4 / rrdl 5 . rtp 6 /faw 12 / cwl 8 / wtrs 4 / wtrl 9 / wr 13 / ref 24000 (21100 if it doesnt like 24000) / rfc 239

core 1090 / mem 1020 / volt 825 (835 if unstable)

I get 53.18mhs with my vega56's..

Morph42

jr. member

Activity: 60

Merit: 2

Quote from: Morph42 on December 14, 2020, 12:02:24 PM

Hi everyone! I was one of the many previously using Claymore to mine ETH until recently. I've now switched over to the current version of lolminer. In doing so I noticed my hashrate dropped and attempting to get it back up again. It was recommended to use AMDmemTweakXL. And after launching and changing the refresh from (5) to (30) on each card I already gained another 1.5mhs per card.

Claymore's had some settings I made in the command line that increased the hash;
[-dbg -1 -mport 3333 -mpsw Miner1 -etha 0 -tt 80 -tstop 90 -eres 0 -rxboost 1 -y 1 -powlim -10 -cclock 1200 -cvddc 820 -mclock 2150 -mvddc 900 -fanmin 90 -fanmax 100 -strap 1]

I know that Claymore and lolminer are different and I may not get the same hashrate, but I am looking at the AMDmemTweakXL and I'm thinking I could do the same here to bring it up some more, but there's a LOT more settings (and sub-settings) to mess with.

I'm asking to see if anyone has already done what I'm trying here. At least a better starting point (and perhaps some pointers).

Each rig is:
Windows 10 x64
(12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available)
lolminer 1.16a
AMDTweak 1.1.0.3

Adding in a snapshot of my AMD via GPUz

Hmmm...anyone out there? I'm a newbie here when it comes to doing this deep of config. The idea of flashing the bios of each card is a little terrifying and looking for some help on this.
Digging a little further into GPUz I find I'm using Polaris20 (ver015.050) on the AMD bios. And then if I do that, help with some basic timings to reduce the power (-10) or increasing the cclock or clock
fearful of damaging anything and looking for some guidance.

dejvic

newbie

Activity: 6

Merit: 0

Dear, can you help me with amdmemtweak
for this card - ATI Sapphire NITRO RX Vega 56 8 GB Hynix HBM2, 113-D0500310-O01

i have this timing -
amdmemtweak --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 36 --RP 14 --RRDS 3 --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14 --REF 65535 --RFC 249

and my maximum is 45.9Mhs

Please help with tunning this tweak :-)

Thank you very much for all.

Morph42

jr. member

Activity: 60

Merit: 2

Hi everyone! I was one of the many previously using Claymore to mine ETH until recently. I've now switched over to the current version of lolminer. In doing so I noticed my hashrate dropped and attempting to get it back up again. It was recommended to use AMDmemTweakXL. And after launching and changing the refresh from (5) to (30) on each card I already gained another 1.5mhs per card.

Claymore's had some settings I made in the command line that increased the hash;
[-dbg -1 -mport 3333 -mpsw Miner1 -etha 0 -tt 80 -tstop 90 -eres 0 -rxboost 1 -y 1 -powlim -10 -cclock 1200 -cvddc 820 -mclock 2150 -mvddc 900 -fanmin 90 -fanmax 100 -strap 1]

I know that Claymore and lolminer are different and I may not get the same hashrate, but I am looking at the AMDmemTweakXL and I'm thinking I could do the same here to bring it up some more, but there's a LOT more settings (and sub-settings) to mess with.

I'm asking to see if anyone has already done what I'm trying here. At least a better starting point (and perhaps some pointers).

Each rig is:
Windows 10 x64
(12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available)
lolminer 1.16a
AMDTweak 1.1.0.3

Adding in a snapshot of my AMD via GPUz

Yirvenpaeae

newbie

Activity: 10

Merit: 0

hi,

can anyone help me to write a batch file?

i start with
folder of tweak tool....exe --i 0,1,2,3,4,5 --rcdrd 19 --REF 15600 --rfc 164

it runs the tool but nothing is changing

thx

wolverine5pl

sr. member

Activity: 437

Merit: 250

anyone tested it on 5700 xt??

DrX

member

Activity: 233

Merit: 20

Quote from: dfg123hjk on December 08, 2020, 03:26:53 AM

hi, please help with settings for rx580, didn't flash them yet, what settings can be used for stock bios to increase MH
with memory 2090 can be unstable and stop mining after few hours, at 2100 won't start
thanks

Just go for Core 1100 and Mem 2000 and add REF 20 ... Should be stable 30Mh/s

dfg123hjk

newbie

Activity: 1

Merit: 0

hi, please help with settings for rx580, didn't flash them yet, what settings can be used for stock bios to increase MH
with memory 2090 can be unstable and stop mining after few hours, at 2100 won't start
thanks
https://imgupload.io/image/R4DKH

wolverine5pl

sr. member

Activity: 437

Merit: 250

anyone has any settings for 5700 xt xfx?

tvukoman

jr. member

Activity: 69

Merit: 5

Quote from: jikolo on November 19, 2020, 05:34:01 PM

which latest driver you recommend for vega on windows that can still use amdmemtweak app?

20.4.2 (not latest, but well tested)

batsonxl

member

Activity: 1201

Merit: 26

Can someone please tell me why AMD mem tweak activates test mode on win10?
It causing problem to me win10 test mode enabled. is there anyway run this AMD mem tweak without test mode?
thanks

jikolo

newbie

Activity: 5

Merit: 0

which latest driver you recommend for vega on windows that can still use amdmemtweak app?

xMindx163

newbie

Activity: 37

Merit: 0

Vega tests and tweaks. from 44 Mh at 110W from wall to 58.6 Mh to 210W (in Russian)
https://youtu.be/38dLTcYWv7c

rudykawi

newbie

Activity: 1

Merit: 0

Hi, I have 2 difficult card for setting AMDmemtweak....one is Gigabyte Windforce Vega 64, other is Radeon Frontier edition
Can I have advise for best amdmemtweak setting for both? thanks for support.

I have also vega 56 , msi and his reference. I succeed to make it 50mh/s with rave OS with below setting :

Core 1150
Mem 960
Core V 810
Core M 810
Fan 50
Temp 59

inside the setting I use this:
amdmemtweak --i [GPU_ID_BY_TYPE] --CL 18 --RAS 23 --RCDRD 15 --RCDWR 11 --RC 34 --RP 13 --RRDS 3 --RRDL 4 --RTP 6 --FAW 12 --CWL 7 --WTRS 4 --WTRL 4 --WR 11 --REF 65000 --RFC 249

and gaining 50,5Mh/s
and already stable

But I can not implement this on my gigabyte vega64 windforce

Also ask for help and appreciated for setting the Radeon Frontier in RaveOS....
thanks.

Topic: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 5. (Read 58892 times)