Topic: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 7. (Read 58892 times)

Just try claymore with -ref option set to 10 or 30 or something, should help a bit if straps dont work

Thanks for response. im not interested in flashing,it works nice but just wanted keep gpus stock bios and use some mem tweaks and strat phoenix miner. I have problems with claymore miner my rig just crashes if i use any strap. Windows install again headache, thats why just wanted to use simple strap on fly on use phoenix miner,

Vega 64 Samsung
---------------
In short, try the following for a 50-51 MH/s setup:

1) Set clocks to core clk 1075 MHz, mem clk 1107 MHz, voltage at 850
   mV. Your card may need to clock down the mem clk to 1050-1080 MHz
   to be stable with no hw errs.

2) Use the following modded timings:

   --CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3
   --RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14
   --REF 17000 --RFC 249

3) Hopefully it runs stable and you should observe a hashrate around
   50.5-50.9 MH/s. If your GPU can't handle the timings, you need to
   relax them to less aggressive variants available in the AMD mem
   tweak thread on Bitcointalk, or come join the TRM discord for
   further suggestions.

4) For better efficiency (but lower hashrate), tune down your core clk
   and try to further lower voltage while remaining stable.

5) We reiterate: _blast_ your fans and monitor your HBM temperature.

Hello guys, your help would be aprreciated 

I have few vegas64 reference samsung memory on me (gigabyte, powercolor, amd) and unfortunately have a hard time setting them to be as efficient as they could

First I tried amdmemtweak with hiveos but couldn't get the results I wanted not even close, still was about 250w from wall (in this post all wattage will be from wall), so I switched to windows 10 and started getting more interesting results as I went through almost every page in this thread (thanks for sharing your settings btw)

Bassicaly I'm aiming on low power consumption because my electricity isn't that cheap here - 0.16$/kwh

These are my best results

--CL 20 --RAS 30 --RCDRD 14 --RCDWR 6 --RC 44 --RP 12 --REF 11700 --TRFC 260
https://imgur.com/a/bPlLOdi

- I was getting 47.2 mhs, 175w draw, after 3 min it always drops to 46mhs but it's stable

I wanted to get lower with power consumption as I found out one guy in our local forum posted he is getting 42mhs with around 100w power draw on his vegas 56, so I flashed one of my vega64 to 56 bios and applied the exact setting as he did, the hashrate was exactly the same around 42mhs but i got only to 165w

Here you can see the settings
https://imgur.com/a/M81meD4


I can see some users getting very nice results with 50mhs+ and low power unfortunately the discussion ended

I will study more and want to play with core and mem control more but I dont understand it fully yet and always when I change it, it lowers hashrate and draws more power  , I saw some users setting OD_SOCLK and also values for OD_SCLK, OD_RANGE under linux, I also downloaded ODNT but can't see these settings there also when I apply first amdmemtweak then odnt the miner just won't start (im using TRM) ...  Could somebody please share their low power cons setting for vega 56/64  or advice me which values shoud I try tweaking , thank you very much

My 5700xt's vram temp is very high, please help me to reduce vram voltage using this tool. Thanks

what...people have been sharing that information a lot...those gpus are 4 years old...
I even made a website to answer basic questions like that many moons ago, I dont update it but you could go check; I suppose most links still work.
www.cryptominingtalk.com/flashing-bios/
even my SSL is out of date, it really has been a while since the last pump.  Good luck with your GPU, but really if you really have trouble people have uploaded a bunch of how to youtube videos on literally everything so go check those out.

was looking to this 2 hours and still have no idea how to twaek these rx 480 8g samsung memory. Could be nice manual or put in read me file. People are greedy not sharing their set up.

Many number clk jlkdsjpo jdkldsfkl 12 135 those number doesnt mean nothing to regular user.

how to change what to change ??

Yes


No, Navi strap injection is not supported and I have no interest in releasing that.


Greetings

Please confirm if this tool can strap timing 1550mhz for 5700xt micron on the fly without bios mod? Thanks so much.

can i apply memory straps in this format ?
777000000000000022AA1C00315A6B3CA0550F15B68C1506006AE4007C041420CA8980A9020004C 01712262B612B3715

my suggestion if you not sure what to change record you timing settings when mem is clocked to 2000

then use SRBPolaris V3.5 by d0kt0r to pimp your timings and make another recording


look at the differences and tweak from there

so you disabled p0 mem state and set p1/p2 @ 2000 and then make your timing changes? not strap changes as they are not supported in this tool on the RX gddr5 cards.


[/quote]


I don't know what timing changes i'm supposed to change, isn't strap changes the same? Those change timing (too).
480 not supported, you say?

so you disabled p0 mem state and set p1/p2 @ 2000 and then make your timing changes? not strap changes as they are not supported in this tool on the RX gddr5 cards.

[/quote]
you have to clock your memory first before making they change as it will get overridden by the straps or the timing level in the driver
[/quote]

I did change the straps, but they dont make any difference. the clocks changing dont do anything either. on 1200@2000 the hashrate is the same. must be phoenixminer then, that holds back the hashrate or something else.

you have to clock your memory first before making they change as it will get overridden by the straps or the timing level in the driver

you got to make sure you change your timing level in the driver to auto or else if its set to 1 or 2 it will get overridden by that setting

also on the RX's strap settings dont work yet

and you have to clock you memory to the speed you want before making any changes or else the strap will override your change

Am i able to set the timings that a bios editor strap button would do?
Because no matter what strap i set, 1500-1750 or whatever i dont get the hash rate that i would get with the bios.
I also loaded the bios and changed to the exact same settings, using default rom and im not getting the same hashrate. overclock etc have no effect.

GDDR5 Based AMD GPU's (ADL & MMIO)


btw

i got 29.7 on my 480/580 hynix cards @80watts i can get em to 32 but thats at 120w not worth it

RX straps arent supported yet in this tool

from what i can tell the refresh rate isnt part of the timing strap
and doesnt change when mem speed changes

where does this setting come from

bios?

driver?

registry?