Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 48. (Read 173441 times)
Any info about 6 working vgas new drivers?
It appears to me the 570 is taking a de-volt better but I'm still seeing higher consumption.
RX470 1150/2100 88.5w -- 30.5MH/s -- bios set to 915mv / GPU-Z showing 0.9813v
RX570 1150/2100 99.7w -- 30.454MH/s -- bios set to 905mV / GPU-Z showing 0.8875v
I am trying to locate my kil-a-watt to get some real wall numbers.
What tool do you use to mod the bios to 905mv ?
How do you reduce the power consumption on the RX570/580 to be equivalent to RX4xx ?
I've just received the Gigabyte Aorus RX570 4gb, doing 28.5Mh/s + 715Mh/s ETH/DCR (-96mv, strap 1500, 1100mhz core 2050mhz mem), 120w gpuz, 160w wall
Core voltage still 100mv higher, my RX4xx have same performances but only 75-100w gpuz !
I've just received the Gigabyte Aorus RX570 4gb, doing 28.5Mh/s + 715Mh/s ETH/DCR (-96mv, strap 1500, 1100mhz core 2050mhz mem), 120w gpuz, 160w wall
Core voltage still 100mv higher, my RX4xx have same performances but only 75-100w gpuz !
It appears to me the 570 is taking a de-volt better but I'm still seeing higher consumption.
RX470 1150/2100 88.5w -- 30.5MH/s -- bios set to 915mv / GPU-Z showing 0.9813v
RX570 1150/2100 99.7w -- 30.454MH/s -- bios set to 905mV / GPU-Z showing 0.8875v
I am trying to locate my kil-a-watt to get some real wall numbers.
Hi, Is this good or bad card ASUS ROG-STRIX-RX570-O4G-GAMING?/what speed can be expected ?
I'm wondering if I should sell my stock, unmodded Fury X (30.8 MH/sec ETH, 465 MH/sec Pascal) and try to snap up two 580s. Or should I wait for Vega and then upgrade? I'd love to run Vega when it comes out, I'm just wondering if two 580s would be more efficient to run while I wait for Vega or if I should keep running one Fury X.
If I keep the Fury X, what should I try to overclock? I know with a Nano at 940 MHz mining just ETH, it was around 26 MH/sec. I think I need to overclock the core if anything cause I have free electricity, but would memory speeds eventually become a bottleneck?
If I keep the Fury X, what should I try to overclock? I know with a Nano at 940 MHz mining just ETH, it was around 26 MH/sec. I think I need to overclock the core if anything cause I have free electricity, but would memory speeds eventually become a bottleneck?
How do you reduce the power consumption on the RX570/580 to be equivalent to RX4xx ?
I've just received the Gigabyte Aorus RX570 4gb, doing 28.5Mh/s + 715Mh/s ETH/DCR (-96mv, strap 1500, 1100mhz core 2050mhz mem), 120w gpuz, 160w wall
Core voltage still 100mv higher, my RX4xx have same performances but only 75-100w gpuz !
I've just received the Gigabyte Aorus RX570 4gb, doing 28.5Mh/s + 715Mh/s ETH/DCR (-96mv, strap 1500, 1100mhz core 2050mhz mem), 120w gpuz, 160w wall
Core voltage still 100mv higher, my RX4xx have same performances but only 75-100w gpuz !
so... 580 its worth or better stay with 470 bios modded ? since on gpuz it says drawn 80 watt *gpu only.
With RX470 you will get about 30% slower decred performance. I have RX470 compared to the RX580 it consumes at GPU-Z 85W-90W and hashes with 28.3 MH/S ethereum and 620MH/S decred and the RX580 with the same settings consumes about 95W-100W at GPU-Z and hashes with 28.8 MH/S ethereum and 920MH/S decred so it is better to buy RX580 .
hi @ all,
iam having this brand new Powercolor RX580 with 8GB Samsung RAM.
If i try to open the Bios which i saved 3 different ways (GpuZ, winAtiflash and atiflash ethos) it always shows very serios timings.
Can someone mod me the Bios or explain to me for good eth performance ? i did for 480 4G but these timings looks odd..
https://drive.google.com/open?id=0B4NHxtaCZnw4MzJ2dm9aeWI1dGc
When i use org. timings from this 580card it is slower 2MH/s slower then my rx 480 4GB from Powercolor.
https://drive.google.com/open?id=0B4NHxtaCZnw4RVIwVS1ZQWJkaFk
Thank you.
iam having this brand new Powercolor RX580 with 8GB Samsung RAM.
If i try to open the Bios which i saved 3 different ways (GpuZ, winAtiflash and atiflash ethos) it always shows very serios timings.
Can someone mod me the Bios or explain to me for good eth performance ? i did for 480 4G but these timings looks odd..
https://drive.google.com/open?id=0B4NHxtaCZnw4MzJ2dm9aeWI1dGc
When i use org. timings from this 580card it is slower 2MH/s slower then my rx 480 4GB from Powercolor.
https://drive.google.com/open?id=0B4NHxtaCZnw4RVIwVS1ZQWJkaFk
Thank you.
Anyone can send original MSI GAMİNGX Rx570 4Gb Hynix Bios I fucked up mine :S thanks
so... 580 its worth or better stay with 470 bios modded ? since on gpuz it says drawn 80 watt *gpu only.
Yep I also read that you only need the 8pin , I think it was @apneal who confirmed that.
Yes now we can see 
but many are not mentioning the needed info
but many are not mentioning the needed infoYeah, I guess I should have stated it. So it is a 4Gb.
And this test rig of mine is powered by a shitty Corsair 750W bronse PSU, so the power figures would be slightly better with a gold PSU. Mobo draws ~40W idle.
when changing from 470 to 570 have to change the power supply 750 watts?
So far as I can, in terms of power, the 570 uses the same or slightly less power than the 470 at the same core frequency.
However, the 570 has one 8-pin and one 6-pin pcie power connector, whereas my Sapphire 470 Nitros have just one 8-pin
power connector. So there will be more cables running between your PSU and GPUs. So far I havent tested if the 570 will work ok with just the 8-pin connector connected. When I get time I will test if it is possible to run the gpu with just the 8-pin power connected.
It should run on only 8-pin, some have tested it and it works.
Bellow text is from sapphire page:
1 x 8-pin + 1 x 6-pin (optional) AUX Power Connector
So i guess its optional
Yes now we can see but many are not mentioning the needed info
but many are not mentioning the needed infoYeah, I guess I should have stated it. So it is a 4Gb.
And this test rig of mine is powered by a shitty Corsair 750W bronse PSU, so the power figures would be slightly better with a gold PSU. Mobo draws ~40W idle.
when changing from 470 to 570 have to change the power supply 750 watts?
So far as I can, in terms of power, the 570 uses the same or slightly less power than the 470 at the same core frequency.
However, the 570 has one 8-pin and one 6-pin pcie power connector, whereas my Sapphire 470 Nitros have just one 8-pin
power connector. So there will be more cables running between your PSU and GPUs. So far I havent tested if the 570 will work ok with just the 8-pin connector connected. When I get time I will test if it is possible to run the gpu with just the 8-pin power connected.
Yes now we can see but many are not mentioning the needed info
but many are not mentioning the needed infoYeah, I guess I should have stated it. So it is a 4Gb.
And this test rig of mine is powered by a shitty Corsair 750W bronse PSU, so the power figures would be slightly better with a gold PSU. Mobo draws ~40W idle.
when changing from 470 to 570 have to change the power supply 750 watts?
Yes now we can see but many are not mentioning the needed info
but many are not mentioning the needed infoYeah, I guess I should have stated it. So it is a 4Gb.
And this test rig of mine is powered by a shitty Corsair 750W bronse PSU, so the power figures would be slightly better with a gold PSU. Mobo draws ~40W idle.
Yes now we can see but many are not mentioning the needed info
but many are not mentioning the needed info RX 570: Power consumption goes up quite a bit with core frequency so I throttled back my RX 570 to 1200/2100 core/mem.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
4 or 8GB?
+1
When you mention your cards in this topic please provide the following info:
Manufacturer / MODEL / MEMORY CAPACITY
Otherwise your posts are useless
Cant you read?
RX 570: Power consumption goes up quite a bit with core frequency so I throttled back my RX 570 to 1200/2100 core/mem.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
4 or 8GB?
Its a 4 Gb. I think the 8Gb performance will be about the same. So far I am very happy with my RX 570s.
They are better than my RX 470s, in terms of hash, power and noise.
RX 570: Power consumption goes up quite a bit with core frequency so I throttled back my RX 570 to 1200/2100 core/mem.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
This is a Sapphire RX 570 Nitro+ with Hynix memory.
Some stats:
ETH mining @ 1200/2100: ~29,67MH/s, power measured at wall with one gpu: 144W
ZEC mining @ 1200/2100: ~295 H/s, power: 131W
HWinfo shows "only" 28 memory errors after 30 minutes of ZEC mining.
4 or 8GB?
+1
When you mention your cards in this topic please provide the following info:
Manufacturer / MODEL / MEMORY CAPACITY
Otherwise your posts are useless
A few GPU tests Sapphire 5xx. A few successes, but one problem.
I use:
Asus Z270F Strix - Without any problems, 7 GPUs work or MSI Z270-A Pro 6 GPU ready, I have tried, I currently operate about 10 Rigs without problem (RX 4xx)
PolarisEditor by jaschaknack - https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b
SRBPolaris - BIOS editor
AtiFlash 2,74
atikmdag-patcher-1.4.5
Wattool o.92 does not function
Sapphire 570 4GB Nitro+ Hynix - strap 1750 - 1100/2050/-96mv-gpu/+20powertarget = 29,3MHs @ cca 156 on the wall
Sapphire 570 8GB Nitro+ Hynix - Strap 1750 - 1100/2100/-96mvgpu/+30powertarget = 29,6MHs
Sapphire 570 4GB Pulse Elpida - strap 1750 - 1100/1910/-96mv-gpu/+30powertarget = 24MHs @ cca 150-160 on the wall
Sapphire 580 8 GB Pulse Hynix - strap 1750 - 1100/2150/-96mv-gpu/+30powetarget = 27,3MHs @ Here I do not know exactly, a little more than 570, No more than 170
Sapphire 570 4GB Mini Elpida - strap 1750 - 1110/2040/-96mvgpu/30+target = 26,3-26,4 @ 164w on the wall = 169 USD newegg very nice
Sapphire 580 8GB Nitro+ - Hynix - Strap 1750 - 1100/2200/-96mvGPU/50powertarget = 27,8MHs
Hynix on 570 is better then Hynix on 580. Hynix on 570 timing 7777 @ 1750 but 580 hynix 999 @ 1750 but i have to check this because the problem is two different time sets 1: 1750 and 2: 1750 each for another set of memories.
This is my tests, But I have a little problem. The signature for the modified bios driver is ok. But it does not work at the same time 570 with 580 on one motherboard.
If the 4x 570 works and re-sign the driver, the 580 runs but does not run 570.
Simply, it works either it or it. It does not work together.
Does anyone have any advice or idea?
Maybe a new Atipatcher?
I use:
Asus Z270F Strix - Without any problems, 7 GPUs work or MSI Z270-A Pro 6 GPU ready, I have tried, I currently operate about 10 Rigs without problem (RX 4xx)
PolarisEditor by jaschaknack - https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b
SRBPolaris - BIOS editor
AtiFlash 2,74
atikmdag-patcher-1.4.5
Wattool o.92 does not function
Sapphire 570 4GB Nitro+ Hynix - strap 1750 - 1100/2050/-96mv-gpu/+20powertarget = 29,3MHs @ cca 156 on the wall
Sapphire 570 8GB Nitro+ Hynix - Strap 1750 - 1100/2100/-96mvgpu/+30powertarget = 29,6MHs
Sapphire 570 4GB Pulse Elpida - strap 1750 - 1100/1910/-96mv-gpu/+30powertarget = 24MHs @ cca 150-160 on the wall
Sapphire 580 8 GB Pulse Hynix - strap 1750 - 1100/2150/-96mv-gpu/+30powetarget = 27,3MHs @ Here I do not know exactly, a little more than 570, No more than 170
Sapphire 570 4GB Mini Elpida - strap 1750 - 1110/2040/-96mvgpu/30+target = 26,3-26,4 @ 164w on the wall = 169 USD newegg very nice
Sapphire 580 8GB Nitro+ - Hynix - Strap 1750 - 1100/2200/-96mvGPU/50powertarget = 27,8MHs
Hynix on 570 is better then Hynix on 580. Hynix on 570 timing 7777 @ 1750 but 580 hynix 999 @ 1750 but i have to check this because the problem is two different time sets 1: 1750 and 2: 1750 each for another set of memories.
This is my tests, But I have a little problem. The signature for the modified bios driver is ok. But it does not work at the same time 570 with 580 on one motherboard.
If the 4x 570 works and re-sign the driver, the 580 runs but does not run 570.
Simply, it works either it or it. It does not work together.
Does anyone have any advice or idea?
Maybe a new Atipatcher?
These numbers raise a few eyebrows... Can you please perhaps check the memory markings physically on the following cards and maybe take photos of the numbers:
Sapphire 580 8GB Nitro+ - Hynix
Sapphire 580 8 GB Pulse - Hynix
Sapphire 570 4GB Pulse - Elpida
Sapphire 570 4GB Mini - Elpida
Jump to: