Okay total new at this, been working with GPU, point me to setup instructions, please.
Edit- Okay got a portion of it, what would be a good conf for Intel Q9650
Topic: An (even more) optimized version of cpuminer (pooler's cpuminer, CPU-only) - page 25. (Read 1958609 times)
March 09, 2014, 01:25:44 PM
March 09, 2014, 11:43:31 AM
Having trouble on linux. All steps go through but when i make bat file and try to connect to pool it does nothing. WHat am i missing?
March 08, 2014, 06:46:35 AM
Is there a way to hide the "Stratum Detected" spam? -q only hide half the spam, the hash part.
in order to do this in cudaminer (fork of pooler's miner) added if statements at
the respective code lines doing the logging (both getwork and stratum)...
March 07, 2014, 06:19:02 PM
Is there a way to hide the "Stratum Detected" spam? -q only hide half the spam, the hash part.
March 07, 2014, 03:49:21 PM
Looking for the most recent CPU miner for Mac?
Link in OP is not working when it comes to downloading the cpuminer.
https://trac.macports.org/browser/trunk/dports/finance/cpuminer/PortfileLink in OP is not working when it comes to downloading the cpuminer.
You can install it through MacPorts. MacPorts in general is a useful thing to have installed anyway.
(It should be noted that currently cpuminer is listed on MacPorts as having no maintainer, so I'm not sure how fast future updates would get submitted, although it's already ahead of first post, so that's encouraging.)
March 06, 2014, 11:01:26 AM
This might be a dumb question (I'm really new at this)..
Can I use the little Ant ASIC usb bit miners to mine litecoins with the cpuminer application?
Thanks
Can I use the little Ant ASIC usb bit miners to mine litecoins with the cpuminer application?
Thanks
no u cannot.
March 05, 2014, 11:18:00 AM
This might be a dumb question (I'm really new at this)..
Can I use the little Ant ASIC usb bit miners to mine litecoins with the cpuminer application?
Thanks
Can I use the little Ant ASIC usb bit miners to mine litecoins with the cpuminer application?
Thanks
March 05, 2014, 02:39:48 AM
Any advice you may have to stop the " -bash: ./minerd: No such file or directory" is greatly appreciated. I have already tried chmod'ing the file, to no avail.
Are you trying to run the 32-bit binary on a 64-bit distro, by any chance? (Seen here.) March 05, 2014, 12:51:29 AM
Hmm. From the ls -l it shows you have minerd already to go so you should be all set.
Try this: chmod 777 minerd
Then try executing minerd again using your pool and username/password combo. Don't just copy and paste the raw parameters I had above that list http://whateverPool. Those are just placeholders. Use your own parameters for whatever pool and worker credentials you registered for.
Try this: chmod 777 minerd
Then try executing minerd again using your pool and username/password combo. Don't just copy and paste the raw parameters I had above that list http://whateverPool. Those are just placeholders. Use your own parameters for whatever pool and worker credentials you registered for.
Hi I am having the same problem as this man here. Any advice you may have to stop the " -bash: ./minerd: No such file or directory" is greatly appreciated. I have already tried chmod'ing the file, to no avail.
March 04, 2014, 05:03:10 PM
.
OK, I was not so tired then...
cpuminer is OK
cudaminer is not OK
root@linux:~/CudaMiner# ./cudaminer --benchmark
*** CudaMiner for nVidia GPUs by Christian Buchner ***
This is version 2014-02-28 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013,2014 Christian Buchner
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2014-03-04 23:00:50] 1 miner threads started, using 'scrypt' algorithm.
^C
root@linux:~/CudaMiner# screen ./cudaminer --benchmark
[screen is terminating]
root@linux:~/CudaMiner#
root@linux:~/CudaMiner# screen -ls
No Sockets found in /var/run/screen/S-root.
root@linux:~/CudaMiner#
March 04, 2014, 09:44:49 AM
What you pasted above looks totally normal to me. You say that with cudaminer or minerd it "doesn't work", but you didn't show us what exactly happens when you try to start them with screen for actual mining. You only showed us the result of running minerd with option -V, and the result was as expected: minerd prints version information (in screen, which is why it doesn't appear above) and exits.
OK, I have isolated this "problem", sorry, it seems I was very tired yesterday
screen -dmS minerd ./minerd -c /etc/kubuntu/test.conf
and lack of full path with this scipt below - and the only one screen was working (with 'top')...
-------------------
root@kubuntu:/etc/init.d# cat mine
#! /bin/sh
### BEGIN INIT INFO
# Provides: mine
# Required-Start:
# Required-Stop:
# X-Start-Before:
# Default-Start:
# Default-Stop:
# Short-Description: Provide limited super user privileges to specific users
# Description: Provide limited super user privileges to specific users.
### END INIT INFO
case "$1" in
start)
screen -dmS minerd ./minerd -c /etc/kubuntu/test.conf
screen -dmS top /usr/bin/top
screen -ls
;;
stop|reload|restart|force-reload|status)
;;
*)
echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0
March 04, 2014, 09:21:44 AM
What you pasted above looks totally normal to me. You say that with cudaminer or minerd it "doesn't work", but you didn't show us what exactly happens when you try to start them with screen for actual mining. You only showed us the result of running minerd with option -V, and the result was as expected: minerd prints version information (in screen, which is why it doesn't appear above) and exits.
You are right,
I have checked again, minerd is starting with screen -dm.
It seems there is something else somewhere, I have to check again in cudaminer.
I'm almost sure, that given cudaminer command was working, and when I have added only prefix "screen -dm" before - it caused some problems.
I will check this in a few hours, I hope it was my mistake only
March 04, 2014, 08:33:27 AM
I just try to execute cudaminer via: screen -dm ./cudaminer
And this doesn't work yet...
And of course, other test, with other apps - are successfull
(I have done some tests before, with top for example, please see below)
Maybe it's some strange cpuminer/operating system issue?
OS is Kubuntu 13.10 64bit: http://www.kubuntu.org/getkubuntu (if you could check)
root@linux:~/cpuminer-master# ./minerd -V
cpuminer 2.3.3
libcurl/7.32.0 OpenSSL/1.0.1e zlib/1.2.8 libidn/1.28 librtmp/2.3
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen ./minerd -V
[screen is terminating]
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen -dmS top /usr/bin/top
root@linux:~/cpuminer-master# screen -ls
There is a screen on:
1861.top (04.03.2014 14:05:27) (Detached)
1 Socket in /var/run/screen/S-root.
root@linux:~/cpuminer-master# uname -a
Linux linux 3.11.0-17-generic #31-Ubuntu SMP Mon Feb 3 21:52:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@linux:~/cpuminer-master# gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.8.1-10ubuntu9' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9)
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
And this doesn't work yet...
And of course, other test, with other apps - are successfull
(I have done some tests before, with top for example, please see below)
Maybe it's some strange cpuminer/operating system issue?
OS is Kubuntu 13.10 64bit: http://www.kubuntu.org/getkubuntu (if you could check)
root@linux:~/cpuminer-master# ./minerd -V
cpuminer 2.3.3
libcurl/7.32.0 OpenSSL/1.0.1e zlib/1.2.8 libidn/1.28 librtmp/2.3
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen ./minerd -V
[screen is terminating]
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen -dmS top /usr/bin/top
root@linux:~/cpuminer-master# screen -ls
There is a screen on:
1861.top (04.03.2014 14:05:27) (Detached)
1 Socket in /var/run/screen/S-root.
root@linux:~/cpuminer-master# uname -a
Linux linux 3.11.0-17-generic #31-Ubuntu SMP Mon Feb 3 21:52:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@linux:~/cpuminer-master# gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.8.1-10ubuntu9' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9)
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
What you pasted above looks totally normal to me. You say that with cudaminer or minerd it "doesn't work", but you didn't show us what exactly happens when you try to start them with screen for actual mining. You only showed us the result of running minerd with option -V, and the result was as expected: minerd prints version information (in screen, which is why it doesn't appear above) and exits.
March 04, 2014, 08:19:59 AM
(gdb) set args ./minerd -V
(gdb) run
Starting program: /usr/bin/screen ./minerd -V
[screen is terminating]
Program received signal SIGHUP, Hangup.
0x00007f9de428f7e0 in __pause_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 ../sysdeps/unix/syscall-template.S: No such file or directory.
Hi, I'm not sure what you are trying to achieve. I can run minerd in screen with no problem at all, and even script it (with screen -dm minerd [OPTIONS]), and never had an issue.
Regarding the gdb output you posted, you will probably get the same result if you try to run a simple program like ls instead of minerd -V.
I just try to execute cudaminer via: screen -dm ./cudaminer
And this doesn't work yet...
And of course, other test, with other apps - are successfull
(I have done some tests before, with top for example, please see below)
Maybe it's some strange cpuminer/operating system issue?
OS is Kubuntu 13.10 64bit: http://www.kubuntu.org/getkubuntu (if you could check)
root@linux:~/cpuminer-master# ./minerd -V
cpuminer 2.3.3
libcurl/7.32.0 OpenSSL/1.0.1e zlib/1.2.8 libidn/1.28 librtmp/2.3
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen ./minerd -V
[screen is terminating]
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master# screen -dmS top /usr/bin/top
root@linux:~/cpuminer-master# screen -ls
There is a screen on:
1861.top (04.03.2014 14:05:27) (Detached)
1 Socket in /var/run/screen/S-root.
root@linux:~/cpuminer-master# uname -a
Linux linux 3.11.0-17-generic #31-Ubuntu SMP Mon Feb 3 21:52:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@linux:~/cpuminer-master# gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.8.1-10ubuntu9' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9)
root@linux:~/cpuminer-master#
root@linux:~/cpuminer-master#
March 04, 2014, 07:32:18 AM
Could you make a little code improvement, because now the only way to use cudaminer with screen
is to run pure screen, and execute cudaminer from screen session. It works fine.
But if you want to have the same, but executed from shell script - there is a SIGHUP signal, which terminates screen completely.
is to run pure screen, and execute cudaminer from screen session. It works fine.
But if you want to have the same, but executed from shell script - there is a SIGHUP signal, which terminates screen completely.
root@linux:~/cpuminer-master# gdb screen
GNU gdb (GDB) 7.6.1-ubuntu
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
Reading symbols from /usr/bin/screen...(no debugging symbols found)...done.
(gdb) set args ./minerd -V
(gdb) run
Starting program: /usr/bin/screen ./minerd -V
[screen is terminating]
Program received signal SIGHUP, Hangup.
0x00007f9de428f7e0 in __pause_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 ../sysdeps/unix/syscall-template.S: No such file or directory.
GNU gdb (GDB) 7.6.1-ubuntu
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
Reading symbols from /usr/bin/screen...(no debugging symbols found)...done.
(gdb) set args ./minerd -V
(gdb) run
Starting program: /usr/bin/screen ./minerd -V
[screen is terminating]
Program received signal SIGHUP, Hangup.
0x00007f9de428f7e0 in __pause_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 ../sysdeps/unix/syscall-template.S: No such file or directory.
Hi, I'm not sure what you are trying to achieve. I can run minerd in screen with no problem at all, and even script it (with screen -dm minerd [OPTIONS]), and never had an issue.
Regarding the gdb output you posted, you will probably get the same result if you try to run a simple program like ls instead of minerd -V.
March 04, 2014, 06:55:34 AM
Hi,
I'm transferred to you by Christian (from cudaminer):
"could you try running pooler's cpuminer in screen, and if it terminates too ask for an improvement in his code (pooler's cpuminer has its own thread on bitcointalk). I can then just merge his fixes in Wink
Christian"
https://bitcointalksearch.org/topic/m.5501200
https://bitcointalksearch.org/topic/m.5501948
I have try the same for your cpuminer:
root@linux:~/cpuminer-master# ./minerd -V
cpuminer 2.3.3
libcurl/7.32.0 OpenSSL/1.0.1e zlib/1.2.8 libidn/1.28 librtmp/2.3
root@linux:~/cpuminer-master# screen ./minerd -V
[screen is terminating]
root@linux:~/cpuminer-master# gdb screen
GNU gdb (GDB) 7.6.1-ubuntu
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
Reading symbols from /usr/bin/screen...(no debugging symbols found)...done.
(gdb) set args ./minerd -V
(gdb) run
Starting program: /usr/bin/screen ./minerd -V
[screen is terminating]
Program received signal SIGHUP, Hangup.
0x00007f9de428f7e0 in __pause_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb)
Could you improve your cpuminer interoperability with screen a bit?
It would be very helpfull - thank you in advance.
Regards
JK
March 03, 2014, 06:07:21 AM
This is the furthest I've gotten now with compiling cpuminer 2.3.3 using MinGW. (32bit)
I used the mstcpip.h file from the MinGW64 tree as I could not find it anywhere else for some reason. Could that be causing the issue?
Using gcc v4.8.1 / curl 7.35
config.log
make:
Looks like it doesn't like ws2tcpip.h. Any ideas on how I can correct this?
I used the mstcpip.h file from the MinGW64 tree as I could not find it anywhere else for some reason. Could that be causing the issue?
Using gcc v4.8.1 / curl 7.35
config.log
Code:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by cpuminer configure 2.3.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure CFLAGS=-O3
## --------- ##
## Platform. ##
## --------- ##
hostname = George-PC
uname -m = i686
uname -r = 1.0.18(0.48/3/2)
uname -s = MINGW32_NT-6.1
uname -v = 2012-11-21 22:34
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: .
PATH: /usr/local/bin
PATH: /mingw/bin
PATH: /bin
PATH: /c/Windows/system32
PATH: /c/Windows
PATH: /c/Windows/System32/Wbem
PATH: /c/Windows/System32/WindowsPowerShell/v1.0/
PATH: /mingw/bin
PATH: /usr
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2330: checking build system type
configure:2344: result: i686-pc-mingw32
configure:2364: checking host system type
configure:2377: result: i686-pc-mingw32
configure:2397: checking target system type
configure:2410: result: i686-pc-mingw32
configure:2454: checking for a BSD-compatible install
configure:2522: result: /bin/install -c
configure:2533: checking whether build environment is sane
configure:2588: result: yes
configure:2739: checking for a thread-safe mkdir -p
configure:2778: result: /bin/mkdir -p
configure:2785: checking for gawk
configure:2801: found /bin/gawk
configure:2812: result: gawk
configure:2823: checking whether make sets $(MAKE)
configure:2845: result: yes
configure:2874: checking whether make supports nested variables
configure:2891: result: yes
configure:2979: checking whether to enable maintainer-specific portions of Makefiles
configure:2988: result: no
configure:3014: checking for style of include used by make
configure:3042: result: GNU
configure:3113: checking for gcc
configure:3129: found /mingw/bin/gcc
configure:3140: result: gcc
configure:3369: checking for C compiler version
configure:3378: gcc --version >&5
gcc.exe (GCC) 4.8.1
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3389: $? = 0
configure:3378: gcc -v >&5
Using built-in specs.
COLLECT_GCC=c:\mingw\bin\gcc.exe
COLLECT_LTO_WRAPPER=c:/mingw/bin/../libexec/gcc/mingw32/4.8.1/lto-wrapper.exe
Target: mingw32
Configured with: ../gcc-4.8.1/configure --prefix=/mingw --host=mingw32 --build=mingw32 --without-pic --enable-shared --enable-static --with-gnu-ld --enable-lto --enable-libssp --disable-multilib --enable-languages=c,c++,fortran,objc,obj-c++,ada --disable-sjlj-exceptions --with-dwarf2 --disable-win32-registry --enable-libstdcxx-debug --enable-version-specific-runtime-libs --with-gmp=/usr/src/pkg/gmp-5.1.2-1-mingw32-src/bld --with-mpc=/usr/src/pkg/mpc-1.0.1-1-mingw32-src/bld --with-mpfr= --with-system-zlib --with-gnu-as --enable-decimal-float=yes --enable-libgomp --enable-threads --with-libiconv-prefix=/mingw32 --with-libintl-prefix=/mingw --disable-bootstrap LDFLAGS=-s CFLAGS=-D_USE_32BIT_TIME_T
Thread model: win32
gcc version 4.8.1 (GCC)
configure:3389: $? = 0
configure:3378: gcc -V >&5
gcc.exe: error: unrecognized command line option '-V'
gcc.exe: fatal error: no input files
compilation terminated.
configure:3389: $? = 1
configure:3378: gcc -qversion >&5
gcc.exe: error: unrecognized command line option '-qversion'
gcc.exe: fatal error: no input files
compilation terminated.
configure:3389: $? = 1
configure:3409: checking whether the C compiler works
configure:3431: gcc -O3 conftest.c >&5
configure:3435: $? = 0
configure:3483: result: yes
configure:3486: checking for C compiler default output file name
configure:3488: result: a.exe
configure:3494: checking for suffix of executables
configure:3501: gcc -o conftest.exe -O3 conftest.c >&5
configure:3505: $? = 0
configure:3527: result: .exe
configure:3549: checking whether we are cross compiling
configure:3557: gcc -o conftest.exe -O3 conftest.c >&5
configure:3561: $? = 0
configure:3568: ./conftest.exe
configure:3572: $? = 0
configure:3587: result: no
configure:3592: checking for suffix of object files
configure:3614: gcc -c -O3 conftest.c >&5
configure:3618: $? = 0
configure:3639: result: o
configure:3643: checking whether we are using the GNU C compiler
configure:3662: gcc -c -O3 conftest.c >&5
configure:3662: $? = 0
configure:3671: result: yes
configure:3680: checking whether gcc accepts -g
configure:3700: gcc -c -g conftest.c >&5
configure:3700: $? = 0
configure:3741: result: yes
configure:3758: checking for gcc option to accept ISO C89
configure:3821: gcc -c -O3 conftest.c >&5
configure:3821: $? = 0
configure:3834: result: none needed
configure:3856: checking dependency style of gcc
configure:3967: result: gcc3
configure:3982: checking for gcc option to accept ISO C99
configure:4131: gcc -c -O3 conftest.c >&5
conftest.c:61:29: error: expected ';', ',' or ')' before 'text'
test_restrict (ccp restrict text)
^
conftest.c: In function 'main':
conftest.c:115:18: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'newvar'
char *restrict newvar = "Another string";
^
conftest.c:115:18: error: 'newvar' undeclared (first use in this function)
conftest.c:115:18: note: each undeclared identifier is reported only once for each function it appears in
conftest.c:125:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < ia->datasize; ++i)
^
conftest.c:125:3: note: use option -std=c99 or -std=gnu99 to compile your code
configure:4131: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| /* end confdefs.h. */
| #include
| #include
| #include
| #include
| #include
|
| // Check varargs macros. These examples are taken from C99 6.10.3.5.
| #define debug(...) fprintf (stderr, __VA_ARGS__)
| #define showlist(...) puts (#__VA_ARGS__)
| #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
| static void
| test_varargs_macros (void)
| {
| int x = 1234;
| int y = 5678;
| debug ("Flag");
| debug ("X = %d\n", x);
| showlist (The first, second, and third items.);
| report (x>y, "x is %d but y is %d", x, y);
| }
|
| // Check long long types.
| #define BIG64 18446744073709551615ull
| #define BIG32 4294967295ul
| #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
| #if !BIG_OK
| your preprocessor is broken;
| #endif
| #if BIG_OK
| #else
| your preprocessor is broken;
| #endif
| static long long int bignum = -9223372036854775807LL;
| static unsigned long long int ubignum = BIG64;
|
| struct incomplete_array
| {
| int datasize;
| double data[];
| };
|
| struct named_init {
| int number;
| const wchar_t *name;
| double average;
| };
|
| typedef const char *ccp;
|
| static inline int
| test_restrict (ccp restrict text)
| {
| // See if C++-style comments work.
| // Iterate through items via the restricted pointer.
| // Also check for declarations in for loops.
| for (unsigned int i = 0; *(text+i) != '\0'; ++i)
| continue;
| return 0;
| }
|
| // Check varargs and va_copy.
| static void
| test_varargs (const char *format, ...)
| {
| va_list args;
| va_start (args, format);
| va_list args_copy;
| va_copy (args_copy, args);
|
| const char *str;
| int number;
| float fnumber;
|
| while (*format)
| {
| switch (*format++)
| {
| case 's': // string
| str = va_arg (args_copy, const char *);
| break;
| case 'd': // int
| number = va_arg (args_copy, int);
| break;
| case 'f': // float
| fnumber = va_arg (args_copy, double);
| break;
| default:
| break;
| }
| }
| va_end (args_copy);
| va_end (args);
| }
|
| int
| main ()
| {
|
| // Check bool.
| _Bool success = false;
|
| // Check restrict.
| if (test_restrict ("String literal") == 0)
| success = true;
| char *restrict newvar = "Another string";
|
| // Check varargs.
| test_varargs ("s, d' f .", "string", 65, 34.234);
| test_varargs_macros ();
|
| // Check flexible array members.
| struct incomplete_array *ia =
| malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
| ia->datasize = 10;
| for (int i = 0; i < ia->datasize; ++i)
| ia->data[i] = i * 1.234;
|
| // Check named initializers.
| struct named_init ni = {
| .number = 34,
| .name = L"Test wide string",
| .average = 543.34343,
| };
|
| ni.number = 58;
|
| int dynamic_array[ni.number];
| dynamic_array[ni.number - 1] = 543;
|
| // work around unused variable warnings
| return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
| || dynamic_array[ni.number - 1] != 543);
|
| ;
| return 0;
| }
configure:4131: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4131: $? = 0
configure:4151: result: -std=gnu99
configure:4165: checking how to run the C preprocessor
configure:4196: gcc -std=gnu99 -E conftest.c
configure:4196: $? = 0
configure:4210: gcc -std=gnu99 -E conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
#include
^
compilation terminated.
configure:4210: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| /* end confdefs.h. */
| #include
configure:4235: result: gcc -std=gnu99 -E
configure:4255: gcc -std=gnu99 -E conftest.c
configure:4255: $? = 0
configure:4269: gcc -std=gnu99 -E conftest.c
conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory
#include
^
compilation terminated.
configure:4269: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| /* end confdefs.h. */
| #include
configure:4298: checking for grep that handles long lines and -e
configure:4356: result: /bin/grep
configure:4361: checking for egrep
configure:4423: result: /bin/grep -E
configure:4429: checking whether gcc -std=gnu99 needs -traditional
conftest.c:11:19: fatal error: sgtty.h: No such file or directory
#include
^
compilation terminated.
conftest.c:11:20: fatal error: termio.h: No such file or directory
#include
^
compilation terminated.
configure:4463: result: no
configure:4471: checking whether gcc -std=gnu99 and cc understand -c and -o together
configure:4502: gcc -std=gnu99 -c conftest.c -o conftest2.o >&5
configure:4506: $? = 0
configure:4512: gcc -std=gnu99 -c conftest.c -o conftest2.o >&5
configure:4516: $? = 0
configure:4527: cc -c conftest.c >&5
configure:4531: $? = 0
configure:4539: cc -c conftest.c -o conftest2.o >&5
configure:4543: $? = 0
configure:4549: cc -c conftest.c -o conftest2.o >&5
configure:4553: $? = 0
configure:4571: result: yes
configure:4605: checking dependency style of gcc -std=gnu99
configure:4714: result: gcc3
configure:4772: checking for ranlib
configure:4788: found /mingw/bin/ranlib
configure:4799: result: ranlib
configure:4822: checking for ANSI C header files
configure:4842: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4842: $? = 0
configure:4915: gcc -std=gnu99 -o conftest.exe -O3 conftest.c >&5
configure:4915: $? = 0
configure:4915: ./conftest.exe
configure:4915: $? = 0
configure:4926: result: yes
configure:4939: checking for sys/types.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for sys/stat.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for stdlib.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for string.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for memory.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for strings.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for inttypes.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for stdint.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4939: checking for unistd.h
configure:4939: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4939: $? = 0
configure:4939: result: yes
configure:4954: checking sys/endian.h usability
configure:4954: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c:54:24: fatal error: sys/endian.h: No such file or directory
#include
^
compilation terminated.
configure:4954: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #include
configure:4954: result: no
configure:4954: checking sys/endian.h presence
configure:4954: gcc -std=gnu99 -E conftest.c
conftest.c:21:24: fatal error: sys/endian.h: No such file or directory
#include
^
compilation terminated.
configure:4954: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h. */
| #include
configure:4954: result: no
configure:4954: checking for sys/endian.h
configure:4954: result: no
configure:4954: checking sys/param.h usability
configure:4954: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:4954: $? = 0
configure:4954: result: yes
configure:4954: checking sys/param.h presence
configure:4954: gcc -std=gnu99 -E conftest.c
configure:4954: $? = 0
configure:4954: result: yes
configure:4954: checking for sys/param.h
configure:4954: result: yes
configure:4954: checking syslog.h usability
configure:4954: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c:55:20: fatal error: syslog.h: No such file or directory
#include
^
compilation terminated.
configure:4954: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #include
configure:4954: result: no
configure:4954: checking syslog.h presence
configure:4954: gcc -std=gnu99 -E conftest.c
conftest.c:22:20: fatal error: syslog.h: No such file or directory
#include
^
compilation terminated.
configure:4954: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| /* end confdefs.h. */
| #include
configure:4954: result: no
configure:4954: checking for syslog.h
configure:4954: result: no
configure:4968: checking for sys/sysctl.h
configure:4968: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c:28:24: fatal error: sys/sysctl.h: No such file or directory
#include
^
compilation terminated.
configure:4968: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_PARAM_H
| #include
| #endif
|
|
| #include
configure:4968: result: no
configure:4984: checking whether be32dec is declared
configure:4984: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c: In function 'main':
conftest.c:67:10: error: 'be32dec' undeclared (first use in this function)
(void) be32dec;
^
conftest.c:67:10: note: each undeclared identifier is reported only once for each function it appears in
configure:4984: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #ifdef HAVE_SYS_ENDIAN_H
| #include
| #endif
|
|
| int
| main ()
| {
| #ifndef be32dec
| #ifdef __cplusplus
| (void) be32dec;
| #else
| (void) be32dec;
| #endif
| #endif
|
| ;
| return 0;
| }
configure:4984: result: no
configure:4999: checking whether le32dec is declared
configure:4999: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c: In function 'main':
conftest.c:68:10: error: 'le32dec' undeclared (first use in this function)
(void) le32dec;
^
conftest.c:68:10: note: each undeclared identifier is reported only once for each function it appears in
configure:4999: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #ifdef HAVE_SYS_ENDIAN_H
| #include
| #endif
|
|
| int
| main ()
| {
| #ifndef le32dec
| #ifdef __cplusplus
| (void) le32dec;
| #else
| (void) le32dec;
| #endif
| #endif
|
| ;
| return 0;
| }
configure:4999: result: no
configure:5014: checking whether be32enc is declared
configure:5014: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c: In function 'main':
conftest.c:69:10: error: 'be32enc' undeclared (first use in this function)
(void) be32enc;
^
conftest.c:69:10: note: each undeclared identifier is reported only once for each function it appears in
configure:5014: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| #define HAVE_DECL_LE32DEC 0
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #ifdef HAVE_SYS_ENDIAN_H
| #include
| #endif
|
|
| int
| main ()
| {
| #ifndef be32enc
| #ifdef __cplusplus
| (void) be32enc;
| #else
| (void) be32enc;
| #endif
| #endif
|
| ;
| return 0;
| }
configure:5014: result: no
configure:5029: checking whether le32enc is declared
configure:5029: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c: In function 'main':
conftest.c:70:10: error: 'le32enc' undeclared (first use in this function)
(void) le32enc;
^
conftest.c:70:10: note: each undeclared identifier is reported only once for each function it appears in
configure:5029: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| #define HAVE_DECL_LE32DEC 0
| #define HAVE_DECL_BE32ENC 0
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| #ifdef HAVE_SYS_ENDIAN_H
| #include
| #endif
|
|
| int
| main ()
| {
| #ifndef le32enc
| #ifdef __cplusplus
| (void) le32enc;
| #else
| (void) le32enc;
| #endif
| #endif
|
| ;
| return 0;
| }
configure:5029: result: no
configure:5046: checking for size_t
configure:5046: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:5046: $? = 0
configure:5046: gcc -std=gnu99 -c -O3 conftest.c >&5
conftest.c: In function 'main':
conftest.c:62:21: error: expected expression before ')' token
if (sizeof ((size_t)))
^
configure:5046: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| #define HAVE_DECL_LE32DEC 0
| #define HAVE_DECL_BE32ENC 0
| #define HAVE_DECL_LE32ENC 0
| /* end confdefs.h. */
| #include
| #ifdef HAVE_SYS_TYPES_H
| # include
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include
| #endif
| #ifdef STDC_HEADERS
| # include
| # include
| #else
| # ifdef HAVE_STDLIB_H
| # include
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include
| # endif
| # include
| #endif
| #ifdef HAVE_STRINGS_H
| # include
| #endif
| #ifdef HAVE_INTTYPES_H
| # include
| #endif
| #ifdef HAVE_STDINT_H
| # include
| #endif
| #ifdef HAVE_UNISTD_H
| # include
| #endif
| int
| main ()
| {
| if (sizeof ((size_t)))
| return 0;
| ;
| return 0;
| }
configure:5046: result: yes
configure:5059: checking for working alloca.h
configure:5076: gcc -std=gnu99 -o conftest.exe -O3 conftest.c >&5
conftest.c:26:20: fatal error: alloca.h: No such file or directory
#include
^
compilation terminated.
configure:5076: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| #define HAVE_DECL_LE32DEC 0
| #define HAVE_DECL_BE32ENC 0
| #define HAVE_DECL_LE32ENC 0
| /* end confdefs.h. */
| #include
| int
| main ()
| {
| char *p = (char *) alloca (2 * sizeof (int));
| if (p) return 0;
| ;
| return 0;
| }
configure:5084: result: no
configure:5092: checking for alloca
configure:5129: gcc -std=gnu99 -o conftest.exe -O3 conftest.c >&5
configure:5129: $? = 0
configure:5137: result: yes
configure:5245: checking for getopt_long
configure:5245: gcc -std=gnu99 -o conftest.exe -O3 conftest.c >&5
configure:5245: $? = 0
configure:5245: result: yes
configure:5280: checking whether we can compile AVX code
configure:5293: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:5293: $? = 0
configure:5297: result: yes
configure:5299: checking whether we can compile XOP code
configure:5312: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:5312: $? = 0
configure:5316: result: yes
configure:5327: checking whether we can compile AVX2 code
configure:5340: gcc -std=gnu99 -c -O3 conftest.c >&5
configure:5340: $? = 0
configure:5344: result: yes
configure:5366: checking for json_loads in -ljansson
configure:5391: gcc -std=gnu99 -o conftest.exe -O3 conftest.c -ljansson >&5
c:/mingw/bin/../lib/gcc/mingw32/4.8.1/../../../../mingw32/bin/ld.exe: cannot find -ljansson
collect2.exe: error: ld returned 1 exit status
configure:5391: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cpuminer"
| #define PACKAGE_TARNAME "cpuminer"
| #define PACKAGE_VERSION "2.3.3"
| #define PACKAGE_STRING "cpuminer 2.3.3"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "cpuminer"
| #define VERSION "2.3.3"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_SYS_PARAM_H 1
| #define HAVE_DECL_BE32DEC 0
| #define HAVE_DECL_LE32DEC 0
| #define HAVE_DECL_BE32ENC 0
| #define HAVE_DECL_LE32ENC 0
| #define HAVE_ALLOCA 1
| #define HAVE_GETOPT_LONG 1
| #define USE_AVX 1
| #define USE_XOP 1
| #define USE_AVX2 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char json_loads ();
| int
| main ()
| {
| return json_loads ();
| ;
| return 0;
| }
configure:5400: result: no
configure:5408: checking for pthread_create in -lpthread
configure:5433: gcc -std=gnu99 -o conftest.exe -O3 conftest.c -lpthread >&5
configure:5433: $? = 0
configure:5442: result: yes
configure:5660: checking for gawk
configure:5687: result: gawk
configure:5749: checking for curl-config
configure:5767: found /usr/local/bin/curl-config
configure:5779: result: /usr/local/bin/curl-config
configure:5790: checking for the version of libcurl
configure:5797: result: 7.35.0
configure:5804: checking for libcurl >= version 7.15.2
configure:5817: result: yes
configure:5858: checking whether libcurl is usable
configure:5892: gcc -std=gnu99 -o conftest.exe -O3 -DCURL_STATICLIB -I/usr/local/include conftest.c -L/usr/local/lib -lcurl -lwldap32 -lws2_32 >&5
configure:5892: $? = 0
configure:5906: result: yes
configure:5919: checking for curl_free
configure:5919: gcc -std=gnu99 -o conftest.exe -O3 -DCURL_STATICLIB -I/usr/local/include conftest.c -L/usr/local/lib -lcurl -lwldap32 -lws2_32 >&5
configure:5919: $? = 0
configure:5919: result: yes
configure:6122: checking that generated files are newer than configure
configure:6128: result: done
configure:6179: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by cpuminer config.status 2.3.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on George-PC
config.status:917: creating Makefile
config.status:917: creating compat/Makefile
config.status:917: creating compat/jansson/Makefile
config.status:917: creating cpuminer-config.h
config.status:1146: executing depfiles commands
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-mingw32
ac_cv_c_compiler_gnu=yes
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value=-O3
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=.exe
ac_cv_func_alloca_works=yes
ac_cv_func_curl_free=yes
ac_cv_func_getopt_long=yes
ac_cv_have_decl_be32dec=no
ac_cv_have_decl_be32enc=no
ac_cv_have_decl_le32dec=no
ac_cv_have_decl_le32enc=no
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_endian_h=no
ac_cv_header_sys_param_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_sysctl_h=no
ac_cv_header_sys_types_h=yes
ac_cv_header_syslog_h=no
ac_cv_header_unistd_h=yes
ac_cv_host=i686-pc-mingw32
ac_cv_lib_jansson_json_loads=no
ac_cv_lib_pthread_pthread_create=yes
ac_cv_objext=o
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_GREP=/bin/grep
ac_cv_path__libcurl_config=/usr/local/bin/curl-config
ac_cv_path_install='/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='gcc -std=gnu99 -E'
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_cc_c89=
ac_cv_prog_cc_c99=-std=gnu99
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_gcc_c_o=yes
ac_cv_prog_gcc_traditional=no
ac_cv_prog_make_make_set=yes
ac_cv_target=i686-pc-mingw32
ac_cv_type_size_t=yes
ac_cv_working_alloca_h=no
am_cv_CCAS_dependencies_compiler_type=gcc3
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_make_support_nested_variables=yes
libcurl_cv_lib_curl_usable=yes
libcurl_cv_lib_curl_version=7.35.0
libcurl_cv_lib_version_ok=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /c/cpuminer/cpuminer-2.3.3/missing aclocal-1.13'
ALLOCA=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
ARCH_ARM_FALSE=''
ARCH_ARM_TRUE='#'
ARCH_x86_64_FALSE=''
ARCH_x86_64_TRUE='#'
ARCH_x86_FALSE='#'
ARCH_x86_TRUE=''
AUTOCONF='${SHELL} /c/cpuminer/cpuminer-2.3.3/missing autoconf'
AUTOHEADER='${SHELL} /c/cpuminer/cpuminer-2.3.3/missing autoheader'
AUTOMAKE='${SHELL} /c/cpuminer/cpuminer-2.3.3/missing automake-1.13'
AWK='gawk'
CC='gcc -std=gnu99'
CCAS='gcc -std=gnu99'
CCASDEPMODE='depmode=gcc3'
CCASFLAGS='-O3'
CCDEPMODE='depmode=gcc3'
CFLAGS='-O3'
CPP='gcc -std=gnu99 -E'
CPPFLAGS=''
CYGPATH_W='echo'
DEFS='-DHAVE_CONFIG_H'
DEPDIR='.deps'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
EXEEXT='.exe'
GREP='/bin/grep'
HAVE_WINDOWS_FALSE='#'
HAVE_WINDOWS_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
JANSSON_LIBS='compat/jansson/libjansson.a'
LDFLAGS=''
LIBCURL='-L/usr/local/lib -lcurl -lwldap32 -lws2_32'
LIBCURL_CPPFLAGS='-DCURL_STATICLIB -I/usr/local/include'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /c/cpuminer/cpuminer-2.3.3/missing makeinfo'
MKDIR_P='/bin/mkdir -p'
OBJEXT='o'
PACKAGE='cpuminer'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='cpuminer'
PACKAGE_STRING='cpuminer 2.3.3'
PACKAGE_TARNAME='cpuminer'
PACKAGE_URL=''
PACKAGE_VERSION='2.3.3'
PATH_SEPARATOR=':'
PTHREAD_FLAGS=''
PTHREAD_LIBS='-lpthread'
RANLIB='ranlib'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
VERSION='2.3.3'
WANT_JANSSON_FALSE='#'
WANT_JANSSON_TRUE=''
WS2_LIBS='-lws2_32'
_libcurl_config=''
ac_ct_CC='gcc'
am__EXEEXT_FALSE='#'
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE='#'
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='i686-pc-mingw32'
build_alias=''
build_cpu='i686'
build_os='mingw32'
build_vendor='pc'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host='i686-pc-mingw32'
host_alias=''
host_cpu='i686'
host_os='mingw32'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /c/cpuminer/cpuminer-2.3.3/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr/local'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='i686-pc-mingw32'
target_alias=''
target_cpu='i686'
target_os='mingw32'
target_vendor='pc'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "cpuminer"
#define PACKAGE_TARNAME "cpuminer"
#define PACKAGE_VERSION "2.3.3"
#define PACKAGE_STRING "cpuminer 2.3.3"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define PACKAGE "cpuminer"
#define VERSION "2.3.3"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_SYS_PARAM_H 1
#define HAVE_DECL_BE32DEC 0
#define HAVE_DECL_LE32DEC 0
#define HAVE_DECL_BE32ENC 0
#define HAVE_DECL_LE32ENC 0
#define HAVE_ALLOCA 1
#define HAVE_GETOPT_LONG 1
#define USE_AVX 1
#define USE_XOP 1
#define USE_AVX2 1
#define HAVE_LIBCURL 1
#define LIBCURL_PROTOCOL_DICT 1
#define LIBCURL_PROTOCOL_FILE 1
#define LIBCURL_PROTOCOL_FTP 1
#define LIBCURL_PROTOCOL_GOPHER 1
#define LIBCURL_PROTOCOL_HTTP 1
#define LIBCURL_PROTOCOL_IMAP 1
#define LIBCURL_PROTOCOL_LDAP 1
#define LIBCURL_PROTOCOL_LDAPS 1
#define LIBCURL_PROTOCOL_POP3 1
#define LIBCURL_PROTOCOL_RTSP 1
#define LIBCURL_PROTOCOL_SMTP 1
#define LIBCURL_PROTOCOL_TELNET 1
#define LIBCURL_PROTOCOL_TFTP 1
configure: exit 0
make:
Code:
$ make
make all-recursive
make[1]: Entering directory `/c/cpuminer/cpuminer-2.3.3'
Making all in compat
make[2]: Entering directory `/c/cpuminer/cpuminer-2.3.3/compat'
Making all in jansson
make[3]: Entering directory `/c/cpuminer/cpuminer-2.3.3/compat/jansson'
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT dump.o -MD -MP -MF .deps/
dump.Tpo -c -o dump.o dump.c
mv -f .deps/dump.Tpo .deps/dump.Po
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT hashtable.o -MD -MP -MF .
deps/hashtable.Tpo -c -o hashtable.o hashtable.c
mv -f .deps/hashtable.Tpo .deps/hashtable.Po
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT load.o -MD -MP -MF .deps/
load.Tpo -c -o load.o load.c
mv -f .deps/load.Tpo .deps/load.Po
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT strbuffer.o -MD -MP -MF .
deps/strbuffer.Tpo -c -o strbuffer.o strbuffer.c
mv -f .deps/strbuffer.Tpo .deps/strbuffer.Po
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT utf.o -MD -MP -MF .deps/u
tf.Tpo -c -o utf.o utf.c
mv -f .deps/utf.Tpo .deps/utf.Po
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../.. -O3 -MT value.o -MD -MP -MF .deps
/value.Tpo -c -o value.o value.c
mv -f .deps/value.Tpo .deps/value.Po
rm -f libjansson.a
ar cru libjansson.a dump.o hashtable.o load.o strbuffer.o utf.o value.o
ranlib libjansson.a
make[3]: Leaving directory `/c/cpuminer/cpuminer-2.3.3/compat/jansson'
make[3]: Entering directory `/c/cpuminer/cpuminer-2.3.3/compat'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/c/cpuminer/cpuminer-2.3.3/compat'
make[2]: Leaving directory `/c/cpuminer/cpuminer-2.3.3/compat'
make[2]: Entering directory `/c/cpuminer/cpuminer-2.3.3'
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -fno-strict-aliasing -I./compat/jansson -DCU
RL_STATICLIB -I/usr/local/include -O3 -MT minerd-cpu-miner.o -MD -MP -MF .deps
/minerd-cpu-miner.Tpo -c -o minerd-cpu-miner.o `test -f 'cpu-miner.c' || echo '.
/'`cpu-miner.c
In file included from C:/MinGW/msys/1.0/local/include/curl/curlbuild.h:124:0,
from C:/MinGW/msys/1.0/local/include/curl/curl.h:34,
from cpu-miner.c:37:
c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible wi
th winsock.h. Include winsock2.h instead."
#error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead
."
^
In file included from C:/MinGW/msys/1.0/local/include/curl/curlbuild.h:124:0,
from C:/MinGW/msys/1.0/local/include/curl/curl.h:34,
from cpu-miner.c:37:
c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq'
struct ip_mreq {
^
In file included from c:\mingw\include\windows.h:93:0,
from cpu-miner.c:23:
c:\mingw\include\winsock.h:315:8: note: originally defined here
struct ip_mreq {
^
make[2]: *** [minerd-cpu-miner.o] Error 1
make[2]: Leaving directory `/c/cpuminer/cpuminer-2.3.3'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/c/cpuminer/cpuminer-2.3.3'
make: *** [all] Error 2
Looks like it doesn't like ws2tcpip.h. Any ideas on how I can correct this?
March 02, 2014, 07:50:41 PM
I'm trying to compile miner for scrypt-jane (https://github.com/microcoinsource/microcoin-GPUminer) already for 4 hours (it's my first experience), but smth going wrong. Can somebody compile it for me?
March 02, 2014, 10:10:04 AM
for windows i'm using differen software
March 02, 2014, 09:52:57 AM
nice tutorial
Yes, it looks really good. No author mentioned to credit however.
Were you successful using it?
i tried run on my vps
I followed every letter of that tutorial and could not compile a working version. I'm using a later version of libcurl, and grabbed mstcpip.h from the MinGW64 package as it wasn't included in my 32-bit tree for some reason.
I don't think that's what is causing the issues however.
I'd be interested to know if you successfully build it in Windows.
Jump to: