📌⚡✅[ANN] 🚀 0x1 LAUNCH 📢 No Ico No Premine SHA256🔥MASTERNODE & FILESHARING✅ - page 4.

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: 0x1Knowledge on April 16, 2018, 11:19:37 AM

Quote from: 0x1Knowledge on April 15, 2018, 06:50:50 PM

Quote from: 0x1Knowledge on April 15, 2018, 09:47:56 AM

Quote from: Qwestion on April 13, 2018, 10:21:09 PM

Quote from: codenamethisNutz on April 12, 2018, 11:17:10 PM

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

0x1 is less than a week old, my 1 mn is paying 300 0x1 daily, just need the dev to get the coin listed on more exchanges. Which i feel is the biggest problems with the "No Ico, No Pre-mine" Launch, yes you obtain a fair launch, however there's no funding for excessive exchange fees on a lot of mediocre exchanges. Dev, whats the next exchange we can look forward too?

We should have a new listing before the 1st of the month, understand your concern. Our team will get it done.

Active Bounties : Website Design -10k 0x1
Weekly Twitter Promotions- 1k 0x1 per week for three tweets daily
Signature Design - 5k
0x1 graphics 50 0x1 per approved graphic
1000 0x1 per article with approvals
1000 0x1 for every 5 masternodes set up and held for 15 day verification of running time and ownership of masternodes.
Masternode guides, FAQ, Wiki page 10k 0x1

Also The 0x1 dev team is a seeking .1btc loan for exchange listing on Yobit. Interest rates are negotiable, 0x1 held for collateral. Please PM for Details.

Updated Version of 0x1's new Wallet with File Sharing intergrated! https://mega.nz/#!O7ARTApK!qa7HthGy5FXvqey2mi10Yz_I-WkcPnJgt5z-QeHftS4

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: 0x1Knowledge on April 15, 2018, 06:50:50 PM

Quote from: 0x1Knowledge on April 15, 2018, 09:47:56 AM

Quote from: Qwestion on April 13, 2018, 10:21:09 PM

Quote from: codenamethisNutz on April 12, 2018, 11:17:10 PM

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

0x1 is less than a week old, my 1 mn is paying 300 0x1 daily, just need the dev to get the coin listed on more exchanges. Which i feel is the biggest problems with the "No Ico, No Pre-mine" Launch, yes you obtain a fair launch, however there's no funding for excessive exchange fees on a lot of mediocre exchanges. Dev, whats the next exchange we can look forward too?

We should have a new listing before the 1st of the month, understand your concern. Our team will get it done.

Active Bounties : Website Design -10k 0x1
Weekly Twitter Promotions- 1k 0x1 per week for three tweets daily
Signature Design - 5k
0x1 graphics 50 0x1 per approved graphic
1000 0x1 per article with approvals
1000 0x1 for every 5 masternodes set up and held for 15 day verification of running time and ownership of masternodes.
Masternode guides, FAQ, Wiki page 10k 0x1

Also The 0x1 dev team is a seeking .1btc loan for exchange listing on Yobit. Interest rates are negotiable, 0x1 held for collateral. Please PM for Details.

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: 0x1Knowledge on April 15, 2018, 09:47:56 AM

Quote from: Qwestion on April 13, 2018, 10:21:09 PM

Quote from: codenamethisNutz on April 12, 2018, 11:17:10 PM

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

0x1 is less than a week old, my 1 mn is paying 300 0x1 daily, just need the dev to get the coin listed on more exchanges. Which i feel is the biggest problems with the "No Ico, No Pre-mine" Launch, yes you obtain a fair launch, however there's no funding for excessive exchange fees on a lot of mediocre exchanges. Dev, whats the next exchange we can look forward too?

We should have a new listing before the 1st of the month, understand your concern. Our team will get it done.

Active Bounties : Website Design -10k 0x1
Weekly Twitter Promotions- 1k 0x1 per week for three tweets daily
Signature Design - 5k
0x1 graphics 50 0x1 per approved graphic
1000 0x1 per article with approvals
1000 0x1 for every 5 masternodes set up and held for 15 day verification of running time and ownership of masternodes.
Masternode guides, FAQ, Wiki page 10k 0x1

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: Qwestion on April 13, 2018, 10:21:09 PM

Quote from: codenamethisNutz on April 12, 2018, 11:17:10 PM

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

0x1 is less than a week old, my 1 mn is paying 300 0x1 daily, just need the dev to get the coin listed on more exchanges. Which i feel is the biggest problems with the "No Ico, No Pre-mine" Launch, yes you obtain a fair launch, however there's no funding for excessive exchange fees on a lot of mediocre exchanges. Dev, whats the next exchange we can look forward too?

We should have a new listing before the 1st of the month, understand your concern. Our team will get it done.

Qwestion

newbie

Activity: 13

Merit: 0

Quote from: codenamethisNutz on April 12, 2018, 11:17:10 PM

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

0x1 is less than a week old, my 1 mn is paying 300 0x1 daily, just need the dev to get the coin listed on more exchanges. Which i feel is the biggest problems with the "No Ico, No Pre-mine" Launch, yes you obtain a fair launch, however there's no funding for excessive exchange fees on a lot of mediocre exchanges. Dev, whats the next exchange we can look forward too?

codenamethisNutz

sr. member

Activity: 504

Merit: 250

Quote from: Apelsinus on April 12, 2018, 05:12:06 PM

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

hopefully the community grows has we support each other on making this coin a lot better!

Apelsinus

copper member

Activity: 83

Merit: 1

Huge respect to codenamethisNutz, the real mvp, who kindly gave me over 30k of coins in order to fix payout issue!

Now you can safely mine on happypool.cc, fees are reduced by 20% also. Have a happy mining!

codenamethisNutz

sr. member

Activity: 504

Merit: 250

a lots of silence going around here!! Huh

just a bit worry we dont get thrown to the wind.

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: ?? on ??

I don't simply see any future or good in this one

Hopefully will be able to change your outlook in the coming months.

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: codenamethisNutz on April 10, 2018, 01:10:57 PM

Quote from: 0x1Knowledge on April 10, 2018, 11:41:28 AM

Quote from: codenamethisNutz on April 09, 2018, 04:57:45 PM

masternode guide for 0x1

Code:

Masternode sample guide for 0x1

using a Windows vps windows server 2012 rented any website with remote desktop

2 core 2 gbs of ram

step 1 download the wallet from the 0X1 thread [this the wallet on the rented vps not your main wallet]

here:

https://bitcointalk.org/index.php?topic=3250477.100

program needed winrar to extract wallet from filehippo you could download it

step 2 setup wallet and sync to the network

add basic wallet config

where to find the wallet config:

use tools [Open wallet configuration file]

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=Any username
rpcpassword=Any pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256

close your wallet and open it back up

step 3 add wallet to the firewall settings

step 4 start setting up the masternode
open debug console type the following commands

1. [masternode genkey] copy the result in a notepad to setup the masternode
2. [getaccountaddress mn1] (mn1 is the alias) copy the result in the notepad
3. send 10,000 the address from the results of (getaccountaddress mn1)
4. wait in till you get one confirmation and type on console [masternode outputs] copy the results into the notepad
5. now organice the data from the outputs.

dont close your wallet yet

step 5

wallet config
masternode config

wallet config

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256
masternode=1
externalip=vps ip
bind=vps ip
masternodeaddr=vps ip:10101
masternodeprivkey= masternode private key

save the wallet config

masternode config

mn1 your ip:10101 [masternode private key] [masternode outputs]

sample
# Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:10100 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0

save the masternode config

now close the wallet and open it back up

if you made a mistake the wallet wont open just find the localappdata file for 0x1 and verify your configs or change
masternode=1 to 0 to open the wallet without running the masternode.

step 6 starting up the masternode [masternodes tap]

usually it will show the masternode has status missing you have to wait in till the wallet is fully sync to start it up, use the button name start missing
you will get a succesful post once you do, wait a minute and start up the alias and your done.

come back in 10 minutes and your masternode should show the active status.

you could send me some 0x1 if this helps

Code:

z9KKnCbQ4iDjYvLM2uPny7371gn8V2uRNt

Over 25 Masternodes now Active! Lets Go! https://0x1.blockxplorer.info/masternodes

you bet, we got some questions on discord when ever you get a chance.

thanks!

Masternode payout issues are resulting from using pools that are not friendly with dash masternode code, which is the reason payouts are taking so long.

codenamethisNutz

sr. member

Activity: 504

Merit: 250

Quote from: 0x1Knowledge on April 10, 2018, 11:41:28 AM

Quote from: codenamethisNutz on April 09, 2018, 04:57:45 PM

masternode guide for 0x1

Code:

Masternode sample guide for 0x1

using a Windows vps windows server 2012 rented any website with remote desktop

2 core 2 gbs of ram

step 1 download the wallet from the 0X1 thread [this the wallet on the rented vps not your main wallet]

here:

https://bitcointalk.org/index.php?topic=3250477.100

program needed winrar to extract wallet from filehippo you could download it

step 2 setup wallet and sync to the network

add basic wallet config

where to find the wallet config:

use tools [Open wallet configuration file]

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=Any username
rpcpassword=Any pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256

close your wallet and open it back up

step 3 add wallet to the firewall settings

step 4 start setting up the masternode
open debug console type the following commands

1. [masternode genkey] copy the result in a notepad to setup the masternode
2. [getaccountaddress mn1] (mn1 is the alias) copy the result in the notepad
3. send 10,000 the address from the results of (getaccountaddress mn1)
4. wait in till you get one confirmation and type on console [masternode outputs] copy the results into the notepad
5. now organice the data from the outputs.

dont close your wallet yet

step 5

wallet config
masternode config

wallet config

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256
masternode=1
externalip=vps ip
bind=vps ip
masternodeaddr=vps ip:10101
masternodeprivkey= masternode private key

save the wallet config

masternode config

mn1 your ip:10101 [masternode private key] [masternode outputs]

sample
# Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:10100 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0

save the masternode config

now close the wallet and open it back up

if you made a mistake the wallet wont open just find the localappdata file for 0x1 and verify your configs or change
masternode=1 to 0 to open the wallet without running the masternode.

step 6 starting up the masternode [masternodes tap]

usually it will show the masternode has status missing you have to wait in till the wallet is fully sync to start it up, use the button name start missing
you will get a succesful post once you do, wait a minute and start up the alias and your done.

come back in 10 minutes and your masternode should show the active status.

you could send me some 0x1 if this helps

Code:

z9KKnCbQ4iDjYvLM2uPny7371gn8V2uRNt

Over 25 Masternodes now Active! Lets Go! https://0x1.blockxplorer.info/masternodes

you bet, we got some questions on discord when ever you get a chance.

thanks!

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: codenamethisNutz on April 09, 2018, 04:57:45 PM

masternode guide for 0x1

Code:

Masternode sample guide for 0x1

using a Windows vps windows server 2012 rented any website with remote desktop

2 core 2 gbs of ram

step 1 download the wallet from the 0X1 thread [this the wallet on the rented vps not your main wallet]

here:

https://bitcointalk.org/index.php?topic=3250477.100

program needed winrar to extract wallet from filehippo you could download it

step 2 setup wallet and sync to the network

add basic wallet config

where to find the wallet config:

use tools [Open wallet configuration file]

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=Any username
rpcpassword=Any pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256

close your wallet and open it back up

step 3 add wallet to the firewall settings

step 4 start setting up the masternode
open debug console type the following commands

1. [masternode genkey] copy the result in a notepad to setup the masternode
2. [getaccountaddress mn1] (mn1 is the alias) copy the result in the notepad
3. send 10,000 the address from the results of (getaccountaddress mn1)
4. wait in till you get one confirmation and type on console [masternode outputs] copy the results into the notepad
5. now organice the data from the outputs.

dont close your wallet yet

step 5

wallet config
masternode config

wallet config

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256
masternode=1
externalip=vps ip
bind=vps ip
masternodeaddr=vps ip:10101
masternodeprivkey= masternode private key

save the wallet config

masternode config

mn1 your ip:10101 [masternode private key] [masternode outputs]

sample
# Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:10100 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0

save the masternode config

now close the wallet and open it back up

if you made a mistake the wallet wont open just find the localappdata file for 0x1 and verify your configs or change
masternode=1 to 0 to open the wallet without running the masternode.

step 6 starting up the masternode [masternodes tap]

usually it will show the masternode has status missing you have to wait in till the wallet is fully sync to start it up, use the button name start missing
you will get a succesful post once you do, wait a minute and start up the alias and your done.

come back in 10 minutes and your masternode should show the active status.

you could send me some 0x1 if this helps

Code:

z9KKnCbQ4iDjYvLM2uPny7371gn8V2uRNt

Over 25 Masternodes now Active! Lets Go! https://0x1.blockxplorer.info/masternodes

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: codenamethisNutz on April 09, 2018, 04:57:45 PM

masternode guide for 0x1

Code:

Masternode sample guide for 0x1

using a Windows vps windows server 2012 rented any website with remote desktop

2 core 2 gbs of ram

step 1 download the wallet from the 0X1 thread [this the wallet on the rented vps not your main wallet]

here:

https://bitcointalk.org/index.php?topic=3250477.100

program needed winrar to extract wallet from filehippo you could download it

step 2 setup wallet and sync to the network

add basic wallet config

where to find the wallet config:

use tools [Open wallet configuration file]

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=Any username
rpcpassword=Any pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256

close your wallet and open it back up

step 3 add wallet to the firewall settings

step 4 start setting up the masternode
open debug console type the following commands

1. [masternode genkey] copy the result in a notepad to setup the masternode
2. [getaccountaddress mn1] (mn1 is the alias) copy the result in the notepad
3. send 10,000 the address from the results of (getaccountaddress mn1)
4. wait in till you get one confirmation and type on console [masternode outputs] copy the results into the notepad
5. now organice the data from the outputs.

dont close your wallet yet

step 5

wallet config
masternode config

wallet config

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256
masternode=1
externalip=vps ip
bind=vps ip
masternodeaddr=vps ip:10101
masternodeprivkey= masternode private key

save the wallet config

masternode config

mn1 your ip:10101 [masternode private key] [masternode outputs]

sample
# Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:10100 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0

save the masternode config

now close the wallet and open it back up

if you made a mistake the wallet wont open just find the localappdata file for 0x1 and verify your configs or change
masternode=1 to 0 to open the wallet without running the masternode.

step 6 starting up the masternode [masternodes tap]

usually it will show the masternode has status missing you have to wait in till the wallet is fully sync to start it up, use the button name start missing
you will get a succesful post once you do, wait a minute and start up the alias and your done.

come back in 10 minutes and your masternode should show the active status.

you could send me some 0x1 if this helps

Code:

z9KKnCbQ4iDjYvLM2uPny7371gn8V2uRNt

Much Needed Guide! Sending 0x1 your way now! Thanks mate!

0x1Knowledge

copper member

Activity: 50

Merit: 1

Quote from: Namita on April 09, 2018, 03:57:44 AM

That awesome big team, big vision , Also I see many partner. Interesting project for sure !

0x1 ROADMAP

1º Phase - 04/2018 to 05/2018

Launch

EXCHANGE - Obtain multiple (tier2) exchange listings

Compiled desktop wallets (done)

2º Phase - 05/2018 to 06/2018

WALLET RELEASE:

-Wallet Integration and upgrades
-Masternode Testing (MNode checkup)

3º Phase - 06/2018 to 07/2018

Bounties: Website Redesign, Marketing, Articles, Reviews, Community Management.

Qwestion

newbie

Activity: 13

Merit: 0

Quote from: Namita on April 09, 2018, 03:57:44 AM

That awesome big team, big vision , Also I see many partner. Interesting project for sure !

Nice hidden Gem, very interesting project, hopefully they land on a bigger exchange this month.

codenamethisNutz

sr. member

Activity: 504

Merit: 250

masternode guide for 0x1

Code:

Masternode sample guide for 0x1

using a Windows vps windows server 2012 rented any website with remote desktop

2 core 2 gbs of ram


step 1 download the wallet from the 0X1 thread [this the wallet on the rented vps not your main wallet]

here:

https://bitcointalk.org/index.php?topic=3250477.100


program needed winrar to extract wallet from filehippo you could download it




step 2 setup wallet and sync to the network

add basic wallet config

where to find the wallet config:

use tools [Open wallet configuration file]




listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=Any username
rpcpassword=Any pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256



close your wallet and open it back up

 


step 3 add wallet to the firewall settings


step 4 start setting up the masternode
open debug console type the following commands

1. [masternode genkey] copy the result in a notepad to setup the masternode
2. [getaccountaddress mn1]  (mn1 is the alias) copy the result in the notepad
3. send 10,000 the address from the results of (getaccountaddress mn1)
4. wait in till you get one confirmation and type on console [masternode outputs] copy the results into the notepad
5. now organice the data from the outputs.

dont close your wallet yet

step 5

wallet config
masternode config

wallet config

listen=1
server=1
daemon=1
enablezeromint=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
logtimestamps=1
maxconnections=256
masternode=1
externalip=vps ip
bind=vps ip
masternodeaddr=vps ip:10101
masternodeprivkey= masternode private key

save the wallet config


masternode config

mn1 your ip:10101 [masternode private key] [masternode outputs]

sample
# Format: alias IP:port masternodeprivkey collateral_output_txid collateral_output_index
# Example: mn1 127.0.0.2:10100 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0


save the masternode config

now close the wallet and open it back up

if you made a mistake the wallet wont open just find the localappdata file for 0x1 and verify your configs or change 
masternode=1 to 0 to open the wallet without running the masternode.


step 6 starting up the masternode [masternodes tap]

usually it will show the masternode has status missing you have to wait in till the wallet is fully sync to start it up, use the button name start missing 
you will get a succesful post once you do, wait a minute and start up the alias and your done. 

come back in 10 minutes and your masternode should show the active status.

you could send me some 0x1 if this helps

Code:

z9KKnCbQ4iDjYvLM2uPny7371gn8V2uRNt

0x1Knowledge

copper member

Activity: 50

Merit: 1

Releasing some more good news to you guys tonight!

codenamethisNutz

sr. member

Activity: 504

Merit: 250

Quote from: upchi on April 09, 2018, 05:45:01 AM

Crex24 OX1/BTC market added!

https://crex24.com/exchange/OX1-BTC

nice thanks, lets get this moving! Tongue

upchi

newbie

Activity: 6

Merit: 0

Crex24 OX1/BTC market added!

https://crex24.com/exchange/OX1-BTC

Namita

newbie

Activity: 169

Merit: 0

That awesome big team, big vision , Also I see many partner. Interesting project for sure !

Topic: 📌⚡✅[ANN] 🚀 0x1 LAUNCH 📢 No Ico No Premine SHA256🔥MASTERNODE & FILESHARING✅ - page 4. (Read 22877 times)