Topic: [ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★ - page 30. (Read 75201 times)
February 08, 2014, 01:34:00 PM
I tried to increase the Intensity in my 270 but seems that it doesn't work right like my 795, I got only 210Mhs with a single 270 card and 300Mhs with a 795. Is that hashrate acceptable?
February 08, 2014, 01:33:03 PM
Looks like it is down now, but I was having the same problem. Although my shares were accepted, it took over a half an hour to "ramp up" on the website. Even after it hit it's peak, I was about 50% less on the site than what cgminer reported.
February 08, 2014, 01:24:49 PM
my cgminer is working but on pool they didnt show my mh, so where my coins going?
good question...
now it seems to work/count again...
BUT same problems as above. cgminer sais 239 Mh/s 1gh.com reports 59 Mh/s
February 08, 2014, 01:23:05 PM
AND no GPU monitoring 
Ooops... just forgot this :
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
February 08, 2014, 01:10:42 PM
my cgminer is working but on pool they didnt show my mh, so where my coins going?
good question...
February 08, 2014, 01:04:53 PM
my cgminer is working but on pool they didnt show my mh, so where my coins going?
February 08, 2014, 01:02:45 PM
trying to get cgminer to work properly on xubuntu with ADL 6 and last (non-mantle) beta drivers...
I have a 4x R9 280X rig. (Gigabyte, undervolted to 1.075 mV)
My AMDAPP folder is in /opt/AMDAPP
Copied ADL_SDK includes files in ADL_SDK folder of cgminer_keccak
sh autogen.sh
CFLAGS="-O2 -Wall -march=native -I /opt/AMDAPP/include/" LDFLAGS="-L/opt/AMDAPP/lib/x86_64" ./configure --enable-keccak
make
got this from ./configure :
------------------------------------------------------------------------
cgminer 3.6.6
------------------------------------------------------------------------
Configuration Options Summary:
libcurl(GBT+getwork).: Enabled: -lcurl
curses.TUI...........: FOUND: -lncurses
OpenCL...............: FOUND. GPU mining support enabled
scrypt...............: Disabled
keccak...............: Enabled
ADL..................: SDK found, GPU monitoring support enabled
Avalon.ASICs.........: Disabled
BFL.ASICs............: Disabled
BitForce.FPGAs.......: Disabled
BitFury.ASICs........: Disabled
Icarus.FPGAs.........: Disabled
Klondike.ASICs.......: Disabled
ModMiner.FPGAs.......: Disabled
Compilation............: make (or gmake)
CPPFLAGS.............:
CFLAGS...............: -O2 -Wall -march=native -I /opt/AMDAPP/include/
LDFLAGS..............: -L/opt/AMDAPP/lib/x86_64 -lpthread
LDADD................: -ldl -lcurl compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86_64 -lOpenCL -lm -lrt
Installation...........: make install (as root if needed, with 'su' or 'sudo')
prefix...............: /usr/local
Change adl.c to call init_overdrive6() instead of init_overdrive5() before make.
Launched with this config :
{
"pools" :
[
{
"name" : "1gh",
"url" : "maxpool.1gh.com:17333",
"user" : "",
"pass" : "1",
"pool-priority" : "0"
},
{
"name" : "dwarf",
"url" : "erebor.dwarfpool.com:3339",
"user" : "",
"pass" : "1",
"pool-priority" : "1"
},
{
"name" : "dwarf2",
"url" : "moria.dwarfpool.com:3339",
"user" : "",
"pass" : "1",
"pool-priority" : "2"
}
],
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"thread-concurrency" : "8192,8192,8192,8192",
"gpu-engine" : "1049,1049,1049,1049",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-platform" : "0",
"gpu-dyninterval" : "7",
"gpu-powertune" : "-20",
"gpu-fan" : "80",
"temp-cutoff" : "95",
"temp-overheat" : "88",
"expiry" : "120",
"expiry-lp" : "3600",
"gpu-threads" : "2",
"log" : "5",
"queue" : "3",
"submit-stale" : true,
"shares" : "0",
"keccak" : true
}
BUT my cgminer declared GPU1 SICK after 2 secs and GPU1 after 5 mins... later those two are declared DEAD. AND no GPU monitoring
cgminer version 3.6.6 - Started: [2014-02-08 07:40:37]
--------------------------------------------------------------------------------
(5s):658.9M (avg):663.9Mh/s | A:28413 R:5916 HW:0 WU:145.3/m
ST: 4 SS: 280 NB: 30 LW: 412 GF: 2 RF: 2
Connected to maxpool.1gh.com diff 15 with stratum as user
Block: 13ca57ff4f0552cc... Diff:18.4E Started: [07:59:30] Best share: 1.4K
--------------------------------------------------------------------------------
[P]ool management [G]PU managementettings [D]isplay options [Q]uit
GPU 0: | 331.8M/288.2Mh/s | A:12178 R:2764 HW:0 WU: 62.8/m I:13
GPU 1: | DEAD /85.18Mh/s | A: 3408 R: 464 HW:0 WU: 18.4/m I:13
GPU 2: | DEAD /933.4Kh/s | A: 32 R: 0 HW:0 WU: 0.1/m I:13
GPU 3: | 331.1M/291.0Mh/s | A:12825 R:2688 HW:0 WU: 64.4/m I:13
--------------------------------------------------------------------------------
[2014-02-08 07:59:31] Rejected e087ac2e Diff 1/15 GPU 0 pool 0 (unknown-work)
[2014-02-08 07:59:33] Accepted 9ada171a Diff 1/15 GPU 3 pool 0
[2014-02-08 07:59:33] Accepted c26b0c31 Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:33] Accepted ab37128e Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:35] Accepted 005cf655 Diff 704/15 GPU 3 pool 0
[2014-02-08 07:59:35] Accepted 384fd99b Diff 4/15 GPU 3 pool 0
[2014-02-08 07:59:35] Accepted fb21de88 Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:35] Accepted b4aefb6c Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:37] Accepted d96f6bfc Diff 1/15 GPU 3 pool 0
Any clue ?
I have a 4x R9 280X rig. (Gigabyte, undervolted to 1.075 mV)
My AMDAPP folder is in /opt/AMDAPP
Copied ADL_SDK includes files in ADL_SDK folder of cgminer_keccak
sh autogen.sh
CFLAGS="-O2 -Wall -march=native -I /opt/AMDAPP/include/" LDFLAGS="-L/opt/AMDAPP/lib/x86_64" ./configure --enable-keccak
make
got this from ./configure :
------------------------------------------------------------------------
cgminer 3.6.6
------------------------------------------------------------------------
Configuration Options Summary:
libcurl(GBT+getwork).: Enabled: -lcurl
curses.TUI...........: FOUND: -lncurses
OpenCL...............: FOUND. GPU mining support enabled
scrypt...............: Disabled
keccak...............: Enabled
ADL..................: SDK found, GPU monitoring support enabled
Avalon.ASICs.........: Disabled
BFL.ASICs............: Disabled
BitForce.FPGAs.......: Disabled
BitFury.ASICs........: Disabled
Icarus.FPGAs.........: Disabled
Klondike.ASICs.......: Disabled
ModMiner.FPGAs.......: Disabled
Compilation............: make (or gmake)
CPPFLAGS.............:
CFLAGS...............: -O2 -Wall -march=native -I /opt/AMDAPP/include/
LDFLAGS..............: -L/opt/AMDAPP/lib/x86_64 -lpthread
LDADD................: -ldl -lcurl compat/jansson-2.5/src/.libs/libjansson.a -lpthread -L/opt/AMDAPP/lib/x86_64 -lOpenCL -lm -lrt
Installation...........: make install (as root if needed, with 'su' or 'sudo')
prefix...............: /usr/local
Change adl.c to call init_overdrive6() instead of init_overdrive5() before make.
Launched with this config :
{
"pools" :
[
{
"name" : "1gh",
"url" : "maxpool.1gh.com:17333",
"user" : "
"pass" : "1",
"pool-priority" : "0"
},
{
"name" : "dwarf",
"url" : "erebor.dwarfpool.com:3339",
"user" : "
"pass" : "1",
"pool-priority" : "1"
},
{
"name" : "dwarf2",
"url" : "moria.dwarfpool.com:3339",
"user" : "
"pass" : "1",
"pool-priority" : "2"
}
],
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"thread-concurrency" : "8192,8192,8192,8192",
"gpu-engine" : "1049,1049,1049,1049",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-platform" : "0",
"gpu-dyninterval" : "7",
"gpu-powertune" : "-20",
"gpu-fan" : "80",
"temp-cutoff" : "95",
"temp-overheat" : "88",
"expiry" : "120",
"expiry-lp" : "3600",
"gpu-threads" : "2",
"log" : "5",
"queue" : "3",
"submit-stale" : true,
"shares" : "0",
"keccak" : true
}
BUT my cgminer declared GPU1 SICK after 2 secs and GPU1 after 5 mins... later those two are declared DEAD. AND no GPU monitoring
cgminer version 3.6.6 - Started: [2014-02-08 07:40:37]
--------------------------------------------------------------------------------
(5s):658.9M (avg):663.9Mh/s | A:28413 R:5916 HW:0 WU:145.3/m
ST: 4 SS: 280 NB: 30 LW: 412 GF: 2 RF: 2
Connected to maxpool.1gh.com diff 15 with stratum as user
Block: 13ca57ff4f0552cc... Diff:18.4E Started: [07:59:30] Best share: 1.4K
--------------------------------------------------------------------------------
[P]ool management [G]PU management
GPU 0: | 331.8M/288.2Mh/s | A:12178 R:2764 HW:0 WU: 62.8/m I:13
GPU 1: | DEAD /85.18Mh/s | A: 3408 R: 464 HW:0 WU: 18.4/m I:13
GPU 2: | DEAD /933.4Kh/s | A: 32 R: 0 HW:0 WU: 0.1/m I:13
GPU 3: | 331.1M/291.0Mh/s | A:12825 R:2688 HW:0 WU: 64.4/m I:13
--------------------------------------------------------------------------------
[2014-02-08 07:59:31] Rejected e087ac2e Diff 1/15 GPU 0 pool 0 (unknown-work)
[2014-02-08 07:59:33] Accepted 9ada171a Diff 1/15 GPU 3 pool 0
[2014-02-08 07:59:33] Accepted c26b0c31 Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:33] Accepted ab37128e Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:35] Accepted 005cf655 Diff 704/15 GPU 3 pool 0
[2014-02-08 07:59:35] Accepted 384fd99b Diff 4/15 GPU 3 pool 0
[2014-02-08 07:59:35] Accepted fb21de88 Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:35] Accepted b4aefb6c Diff 1/15 GPU 0 pool 0
[2014-02-08 07:59:37] Accepted d96f6bfc Diff 1/15 GPU 3 pool 0
Any clue ?
February 08, 2014, 01:01:11 PM
ok, I NEED to fix this NOW.
On 1gh, it says I have 200MH/s
but my cgminer reports 800-900MH/s
The difficulty is low, it's 15.
Please help me.
On 1gh, it says I have 200MH/s
but my cgminer reports 800-900MH/s
The difficulty is low, it's 15.
Please help me.
February 08, 2014, 12:56:38 PM
I'm having the same issue, the page doesn't seem to be updated while my miner is still working ??
February 08, 2014, 12:54:34 PM
http://i.imgur.com/pUn9MPk.png
finally i got the cgminer to work.. so it seems.
THX to everybody for tipps!
BUT: after mining 15 min like you see on the screenshot,
still nothing at
http://max.1gh.com/user?wallet=mLzWkSUQAxV7rFSzcWotWau27VZSuAPtzq
hmmm :/
curious if someone has the same problem?
February 08, 2014, 12:39:56 PM
And yea intensity 10 seems to work best for me too with the least rejects
February 08, 2014, 12:29:40 PM
did this cant get it to work cgminer just comes on but dosent start mining have the latest beta driver for catalyst and windows 7 64 up to date any ideas? i dont have a config file set up would that do it? never made one for any other cgminer tho
I had to start the miner about 10 times in order for it to connect to 1gh, it can take a while, I guess it's because the pool is very busy and likely prioritizing already connected miners.
edit: great
February 08, 2014, 12:29:31 PM
nvm it started mining lol just had to let it sit there a few mins before it came on
February 08, 2014, 12:27:59 PM
PLease reply and get updated info about your pool here:
https://bitcointalksearch.org/topic/max-50-more-coins-maxcoin-upgraded-pools-list-updated-crowdsourced-453850
https://bitcointalksearch.org/topic/max-50-more-coins-maxcoin-upgraded-pools-list-updated-crowdsourced-453850
MAXCOIN POOLS LIST - CROWDSOURCED
February 08, 2014, 12:26:58 PM
anyone have a good config for 280x cgminer?
im looking to make my R9 290 work...
1. Download Cgminer at http://maxdl.1gh.com/cgminer-windows.zip?nocache=0.7462486436124891
2. Extract zip
3. Go into folder
4. Edit max1gh_start.bat
5. Change wallet address to your wallet address.
6. Save file
7. Run file
That's it.
If it doesn't work, update driver, update windows.
Tip: change your intensity to 14 while cgminer is running.
1. Push (G)
2. Push (I)
3. Select gpu by writing 0 then enter
4. Write 14, then enter.
if you have more gpus, just repeat step 3 and 4 by writing 1, 2, 3 etc depending on how many gpu's you have
You'll be able to see your balance and stats on http://max.1gh.com/
Just paste your wallet address into the User Stats.
February 08, 2014, 12:06:25 PM
i
February 08, 2014, 11:57:50 AM
Please!!
I am using BAMT with cgminer 3.7.2.
Need detailed instructions on how to install the open source linux GPU mining from max.1gh.com that has cgminer with keccak support.
If anyone can direct me to instructions?
Thank You!!!
I am using BAMT with cgminer 3.7.2.
Need detailed instructions on how to install the open source linux GPU mining from max.1gh.com that has cgminer with keccak support.
If anyone can direct me to instructions?
Thank You!!!
February 08, 2014, 11:54:55 AM
you didnt fine tune at all?
see my post again, I edited it
thanks, 14 seemed to make too many stales, 10 is working better
February 08, 2014, 11:47:47 AM
I guess the answer is about 15 minutes. My MH is slowing being added in.
I have 39 GPU's directed to 1GH.COM all pointing to (double checked), my MCXNOW wallet address. There have been 11 blocks found since I started but the stats aren't showing anything under my address either on the main page or my stats page. How long do you have to wait?
http://max.1gh.com/user?wallet=mTD2NHrwnGCuGrQbfDE7Ph2NZ55FAEcY7Z
http://max.1gh.com/user?wallet=mTD2NHrwnGCuGrQbfDE7Ph2NZ55FAEcY7Z
February 08, 2014, 11:44:58 AM
you didnt fine tune at all?
see my post again, I edited it
Jump to: