Topic: [ANN] 1GH.COM - HVC / MAX / MMC / PTS / VIA Anonymous Pool ★ - page 25. (Read 75201 times)

Can't see my stats on maxcoin. WTF? Pool accepting shares.

all my connections keep timing out? under DDOS? Was mining fine before..

I'm mining MaxCoin with 1GH.com using Cudaminer, and I have an NVIDIA Quadro 4000 graphics card that I'm using. Oh, and I'm on a windows 7, 64 bit computer. Things seem to be working, but I want to be sure that I'm not potentially burning up my graphics card.  I have my connection string set to:

cudaminer.exe -H 1 -l F512x16 -a keccak -o stratum+tcp://maxpool.1gh.com:17333/ -u account -p password

I'm getting what I think is decent performance, I think... but not earning much in the way of maxcoins...seems to take a lot of effort just to earn tiny fractions.  

The command window indicates that hashes seem to average around 28280 khash/s unless I start doing stuff on my computer, then it gets lower.  Anyway, the temperature seems stable around 77 to 78 degrees, and it is operating at the gpu stated upper limits.  I'm getting quite a few yays, and only an occasional boo.  Here is a link to a screen shot of the command window and gpu z.

https://drive.google.com/file/d/0B1E0rFsXEmnBVDh6aWlGSVEzZk0/edit?usp=sharing

Can someone who understands this stuff tell me if I'm within a good range to maintain optimal performance while keeping my graphics card in good shape???  Or am I risking wearing it out?  Is there a more appropriate setting for my graphics card?

Also, I've been letting the program run pretty consistently all day (probably over 16 hours I think), and I've only earned 0.16 MAX.  That seems kind of low, doesn't it?

Would appreciate your thoughts.

Thanks

Katherine

Total 4639126.7 MH/s (70.8% total net)

hmmm... 

So maybe someone could help me out here!  Does 0.5 MAXCOIN mean (='s) a half a maxcoin.... Because I have been at this for 18 plus hours and it says I have 0.0305 maxcoin..... because if thatis the case that would be like 7 cents worth of maxcoin before you guys even get your fees..

Yay! Good job  
Bestest pool ever.

To support MaxCoin decentralization, max.1gh.com now has increased fees when pool hashrate is above 50% network total. 50-60% fee is 2%, above 60% fee is 3%.

Linux? Windows?  If Linux, then my manual perhaps helps you:  https://bitcointalk.org/index.php?topic=460178.msg5094447#msg5094447


That error message ... you are lacking informed nodes, no?

FWIW, I would strongly recommend against using this pool in particular. The op is essentially stealing my work (just look at this commit: https://github.com/Atrides/cgminer_keccak/commit/d60966dcfab976127f783cf7a9b00fbbf7e31219), chances are with moral principles that high he does not mind stealing users shares too. There is already a variety of stable pools to chose from now that ddoses have seized at http://www.maxcoin.co.uk/pools

@ drakoin -

No worries buddy.  I finally got it up and humming along.  Now if I could only get the maxcoin wallet working. Getting "No block source available..."

Anyone else with the same issue?

Oh sorry, I didn't intend that.   Of course, this is the 1gh version:


Shall I change the above post?


My reason behind this mistake, and me having changed to the other one ... was actually the success of 1gh.com. 
In that ridiculous coinstart drama, 1gh.com was one of the few competent actors.

But it meant that 1gh got overrun / DDoSed. 
There were hours in which it collapsed / was unreachable - so I was really happy to find that alternative p2pool.

And now I am still there. Which is - to avoid the 51% ochlocracy - probably good, don't you agree?

Please PM me your MAX address (the one you use for mining) so I could look into it.

1GH -

I am a member of your pool and I have a question about withdrawing funds.  When I was using a cpuminer, I was able to move out some of my mined work.  I've since switched to a cudaminer and can't see to do the same using the maxcoin-qt file I used before.  Can you point me in the right direction of how I may?  Thanks.

To speed up payment tx processing http://max.1gh.com  min immediate autopayment raised to 0.5 MAX

https://twitter.com/1ghcom/status/433570292602904577

 If your balance is less than 0.5 MAX, the payout will be executed within 24-72 hours (minimum 0.01 MAX).

@ spoetnik -

After mining my brain for the past several hours, I finally got the cudaminer to work " (yay!!!) "

I'm assuming that the following confirms my suspicion?

[2014-02-12 01:02:16] GPU #0: GRID K520, 66953 khash/s
[2014-02-12 01:02:16] accepted: 16/16 (100.00%), 66953 khash/s (yay!!!)
[2014-02-12 01:02:22] GPU #0: GRID K520, 69221 khash/s
[2014-02-12 01:02:22] accepted: 17/17 (100.00%), 69221 khash/s (yay!!!)
[2014-02-12 01:02:31] GPU #0: GRID K520, 69023 khash/s
[2014-02-12 01:02:31] accepted: 18/18 (100.00%), 69023 khash/s (yay!!!)
[2014-02-12 01:02:46] GPU #0: GRID K520, 69326 khash/s
[2014-02-12 01:02:46] accepted: 19/19 (100.00%), 69326 khash/s (yay!!!)
[2014-02-12 01:02:48] GPU #0: GRID K520, 69007 khash/s
[2014-02-12 01:02:48] accepted: 20/20 (100.00%), 69007 khash/s (yay!!!)
[2014-02-12 01:03:05] GPU #0: GRID K520, 69267 khash/s
[2014-02-12 01:03:11] GPU #0: GRID K520, 69215 khash/s
[2014-02-12 01:03:11] GPU #0: GRID K520, 43801 khash/s
[2014-02-12 01:03:11] accepted: 21/21 (100.00%), 43801 khash/s (yay!!!)
[2014-02-12 01:03:11] accepted: 22/22 (100.00%), 43801 khash/s (yay!!!)
[2014-02-12 01:03:18] GPU #0: GRID K520, 69204 khash/s
[2014-02-12 01:03:18] accepted: 23/23 (100.00%), 69204 khash/s (yay!!!)
[2014-02-12 01:03:32] GPU #0: GRID K520, 69249 khash/s
[2014-02-12 01:03:32] accepted: 24/24 (100.00%), 69249 khash/s (yay!!!)
[2014-02-12 01:03:43] GPU #0: GRID K520, 69205 khash/s
[2014-02-12 01:03:52] GPU #0: GRID K520, 69182 khash/s
[2014-02-12 01:03:52] accepted: 25/25 (100.00%), 69182 khash/s (yay!!!)
[2014-02-12 01:03:53] GPU #0: GRID K520, 68495 khash/s
[2014-02-12 01:03:53] accepted: 26/26 (100.00%), 68495 khash/s (yay!!!)
[2014-02-12 01:03:54] GPU #0: GRID K520, 67758 khash/s
[2014-02-12 01:03:54] accepted: 27/27 (100.00%), 67758 khash/s (yay!!!)
[2014-02-12 01:03:54] GPU #0: GRID K520, 68495 khash/s
[2014-02-12 01:03:54] accepted: 28/28 (100.00%), 68495 khash/s (yay!!!)
[2014-02-12 01:04:02] GPU #0: GRID K520, 69135 khash/s
[2014-02-12 01:04:02] accepted: 29/29 (100.00%), 69135 khash/s (yay!!!)
[2014-02-12 01:04:15] GPU #0: GRID K520, 69225 khash/s
[2014-02-12 01:04:15] GPU #0: GRID K520, 65639 khash/s
[2014-02-12 01:04:15] accepted: 30/30 (100.00%), 65639 khash/s (yay!!!)
[2014-02-12 01:04:16] GPU #0: GRID K520, 68338 khash/s
[2014-02-12 01:04:16] accepted: 31/31 (100.00%), 68338 khash/s (yay!!!)
[2014-02-12 01:04:20] GPU #0: GRID K520, 68950 khash/s
[2014-02-12 01:04:20] accepted: 32/32 (100.00%), 68950 khash/s (yay!!!)
[2014-02-12 01:04:20] GPU #0: GRID K520, 61538 khash/s
[2014-02-12 01:04:20] accepted: 33/33 (100.00%), 61538 khash/s (yay!!!)
[2014-02-12 01:04:23] GPU #0: GRID K520, 69502 khash/s
[2014-02-12 01:04:23] accepted: 34/34 (100.00%), 69502 khash/s (yay!!!)
[2014-02-12 01:04:25] GPU #0: GRID K520, 68053 khash/s
[2014-02-12 01:04:25] accepted: 35/35 (100.00%), 68053 khash/s (yay!!!)
[2014-02-12 01:04:27] GPU #0: GRID K520, 68805 khash/s
[2014-02-12 01:04:27] accepted: 36/36 (100.00%), 68805 khash/s (yay!!!)
[2014-02-12 01:04:48] GPU #0: GRID K520, 69308 khash/s
[2014-02-12 01:05:24] GPU #0: GRID K520, 69314 khash/s
[2014-02-12 01:05:24] accepted: 37/37 (100.00%), 69314 khash/s (yay!!!)
[2014-02-12 01:14:56] Stratum detected new block
[2014-02-12 01:14:56] GPU #0: GRID K520, 1769 khash/s
[2014-02-12 01:14:57] GPU #0: GRID K520, 68956 khash/s
[2014-02-12 01:15:12] GPU #0: GRID K520, 69230 khash/s
[2014-02-12 01:15:12] accepted: 38/38 (100.00%), 69230 khash/s (yay!!!)

that sounds like the correct amount of files ya..
and here is the official page for cudaminer if you want to try and get it and look for help there too..
https://bitcointalksearch.org/topic/ann-cudaminer-ccminer-cuda-based-mining-applications-windowslinuxmacosx-167229

is the proper nvidia drivers installed that support Cuda ?
you said you were trying a service service for this mining right ? sorry i forgot what you said before already on previous page

@ spoetnik

Thanks for responding.  Removed everything else, ran & still nothing.

Searched for cudaminer here and got a bunch of garbage.

Can you or anyone confirm that all I need to mine are the 4 files found in the \cudaminer-2014-02-09\x64 directory that I downloaded from the 1GH main page last night?

They are:  cudaminer.exe, cudaminer_start.bat, cudart64_55.dll & pthreadVC2.dll

Thanks

get rid of the loop crap..

you only need one line.
also verify the settings on the config for cudaminer and the build etc.. make sure it's correct .. see cudaminer topic for that.

also anyone have any thought on what i said ?
i want to know if anyone else is getting the same thing or what too..

@ drakoin & reorder -

Tried drakoin's command and it does nothing except bring me back to another prompt. Hmm

@reorder -

Thanks for the clarification... I will give that a try.