[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 126.

Navyman47

member

Activity: 96

Merit: 10

Quote from: KingCole on May 24, 2014, 02:29:24 PM

Quote from: acboy on May 24, 2014, 02:25:43 PM

.........

The development team is a group of swindlers
Has been the development team in the dumping of coin

Oh look a Troll, welcome to my ignore list

KC

+1 agree with KC

KingCole

sr. member

Activity: 348

Merit: 250

Quote from: acboy on May 24, 2014, 02:25:43 PM

.........

The development team is a group of swindlers
Has been the development team in the dumping of coin

Oh look a Troll, welcome to my ignore list

KC

Ayle56

full member

Activity: 185

Merit: 100

Quote from: fredeq on May 24, 2014, 12:00:21 PM

Quote from: carlo63 on May 24, 2014, 11:58:31 AM

Poloniex:

Markets for the following coins will be delisted on May 24th: FRK, UTC, MTS, KDC, PMC, TWE, CON, GPUC

Huh

Delisting of UTC was put on hold. Chill, tune miners, check profitability Wink

Where does it say the delisting of UTC is on hold?

acboy

newbie

Activity: 13

Merit: 0

Quote from: Marnie1976 on May 24, 2014, 02:21:00 PM

6000 PRICE POT TO WIN !!!

YOU CAN STILL WIN THE POT OF A PART OF THE POT

WE NEED 100 VOTES BEFORE THIS EVENING 24:00 HOUR

Quote from: RichardMiner on May 23, 2014, 06:42:04 AM

Quote from: KingCole on May 22, 2014, 03:52:07 PM

Quote from: PaulR1 on May 19, 2014, 06:33:49 PM

WHY WE ARE ASKING YOU TO VOTE

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

We are asking for votes for coinpayments.net, because coin payments is a payment processor. If they list us, then UTC can be used by any of their partners.

WHY IT IS SO IMPORTANT THAT WE NEED YOU TO VOTE

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

The #1 most critical thing in the evolution of ultracoin is to have a payment processor. Not only does it let utc holders actually spend their utc, but it also shows us to be a legitimate coin.

WHY A SUCH LOW DONATION OF (ONLEY) $ 0.88 AND WHAT ARE WE HELPING WHIT IT Huh

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

Coin payments has decided to give all vote donations to the Water Project, instead of keeping those coins for themselves. The water project has nothing to do with anything else.

https://thewaterproject.org/

SO WHAT WE NEED YOU TO DO BEFORE (EDIT) SATERDAY

VOTE, VOTE AND VOTE.....

--> THE PROCES OF VOTING TAKES YOU ONLEY 5 MINUTES
(don't forget it takes three emails from Coinpayments you have all to confirm If you don't confirm the last email your vote will not be counted !!!!)

--> THE DONATION COST YOU ONLEY AS LITTLE AS $ 0,88 CENTS

https://www.coinpayments.net/vote

https://www.coinpayments.net/vote-thanks

http://cdn.memegenerator.net/instances/500x/49961232.jpg

We have only had one vote in the last 24 hours, lets not be complacent. Getting on CoinPayments is very important and raises the coins profile. All this talk about appealing to miners is not something I'm overly convinced about, with multi-pools now widespread miners just look for the most profitable coin to make a quick buck, why appeal to these individuals.

As the CoinPayments clearly shows we have just 60+ people who actually care about the coin long term rather than making a short buck after a couple of days. DCGirl is providing unique opportunities for Ultracoin and spreading the word on Twitter, all do the same and the word will spread

KC

The development team is a group of swindlers
Has been the development team in the dumping of coin

Marnie1976

sr. member

Activity: 275

Merit: 250

6000 PRICE POT TO WIN !!!

YOU CAN STILL WIN THE POT OF A PART OF THE POT

WE NEED 100 VOTES BEFORE THIS EVENING 24:00 HOUR

Quote from: RichardMiner on May 23, 2014, 06:42:04 AM

Quote from: KingCole on May 22, 2014, 03:52:07 PM

Quote from: PaulR1 on May 19, 2014, 06:33:49 PM

WHY WE ARE ASKING YOU TO VOTE

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

We are asking for votes for coinpayments.net, because coin payments is a payment processor. If they list us, then UTC can be used by any of their partners.

WHY IT IS SO IMPORTANT THAT WE NEED YOU TO VOTE

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

The #1 most critical thing in the evolution of ultracoin is to have a payment processor. Not only does it let utc holders actually spend their utc, but it also shows us to be a legitimate coin.

WHY A SUCH LOW DONATION OF (ONLEY) $ 0.88 AND WHAT ARE WE HELPING WHIT IT Huh

Quote from: dcgirl on May 19, 2014, 07:13:39 AM

Coin payments has decided to give all vote donations to the Water Project, instead of keeping those coins for themselves. The water project has nothing to do with anything else.

https://thewaterproject.org/

SO WHAT WE NEED YOU TO DO BEFORE (EDIT) SATERDAY

VOTE, VOTE AND VOTE.....

--> THE PROCES OF VOTING TAKES YOU ONLEY 5 MINUTES
(don't forget it takes three emails from Coinpayments you have all to confirm If you don't confirm the last email your vote will not be counted !!!!)

--> THE DONATION COST YOU ONLEY AS LITTLE AS $ 0,88 CENTS

https://www.coinpayments.net/vote

https://www.coinpayments.net/vote-thanks

We have only had one vote in the last 24 hours, lets not be complacent. Getting on CoinPayments is very important and raises the coins profile. All this talk about appealing to miners is not something I'm overly convinced about, with multi-pools now widespread miners just look for the most profitable coin to make a quick buck, why appeal to these individuals.

As the CoinPayments clearly shows we have just 60+ people who actually care about the coin long term rather than making a short buck after a couple of days. DCGirl is providing unique opportunities for Ultracoin and spreading the word on Twitter, all do the same and the word will spread

KC

barbados-fs

hero member

Activity: 837

Merit: 505

On http://bitgo.pw/utc/
12   2048   Sun, 06 Apr 2014 02:10:08 GMT
13   4096   Sat, 24 May 2014 15:15:12 GMT
14   8192   Sat, 12 Jul 2014 04:20:16 GMT

On http://ultracoin.net/configgen_raw.html
I:11 = 2048 threads
I:12 = 4096 threads
I:13 = 8192 threads

Where is the truth?

barbados-fs

hero member

Activity: 837

Merit: 505

Quote from: flobdeth on May 24, 2014, 11:36:50 AM

Quote from: barbados-fs on May 24, 2014, 11:29:38 AM

Quote from: primouno on May 24, 2014, 11:01:26 AM

Quote from: flobdeth on May 24, 2014, 10:53:32 AM

Quote from: hanvude2424 on May 24, 2014, 10:35:32 AM

r9 270 config? , please !! Huh

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

Because you're using Yacminer Wink

FYI: the mining calc on the main page is an epic tool....use it Grin

I just added some extras to mine, works perfectly

EDIT: if any of you miners don't have this page bookmarked, go stand in the corner and be ashamed of yourselves Grin

https://litecoin.info/Mining_hardware_comparison

I have not yet suffer from senility, that would not distinguish settings under ultracoin-miner on the settings under Yacminer.

Of course, these are the settings I tried not to Yacminer Wink

longyenthanh

sr. member

Activity: 1221

Merit: 250

Quote from: longyenthanh on May 24, 2014, 12:33:49 PM

Quote from: primouno on May 24, 2014, 11:38:02 AM

Quote from: longyenthanh on May 24, 2014, 11:20:21 AM

Quote from: primouno on May 24, 2014, 10:41:33 AM

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

I set virutal Ram to 32GB, but still get error buffer if I set TH > 42000 Angry

nvm it works, I forgot to hit Ok when i sat virtual Ram Cheesy

Thank you

longyenthanh

sr. member

Activity: 1221

Merit: 250

Quote from: primouno on May 24, 2014, 11:38:02 AM

Quote from: longyenthanh on May 24, 2014, 11:20:21 AM

Quote from: primouno on May 24, 2014, 10:41:33 AM

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

I set virutal Ram to 32GB, but still get error buffer if I set TH > 42000 Angry

flobdeth

member

Activity: 82

Merit: 10

Quote from: fredeq on May 24, 2014, 12:00:21 PM

check profitability Wink

SHHH let us work it some more before the others catch on Wink

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: carlo63 on May 24, 2014, 11:58:31 AM

Poloniex:

Markets for the following coins will be delisted on May 24th: FRK, UTC, MTS, KDC, PMC, TWE, CON, GPUC

Huh

Delisting of UTC was put on hold. Chill, tune miners, check profitability Wink

carlo63

member

Activity: 70

Merit: 10

Poloniex:

Markets for the following coins will be delisted on May 24th: FRK, UTC, MTS, KDC, PMC, TWE, CON, GPUC

Huh

primouno

sr. member

Activity: 251

Merit: 250

Quote from: longyenthanh on May 24, 2014, 11:20:21 AM

Quote from: primouno on May 24, 2014, 10:41:33 AM

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

No, only 4 GB

flobdeth

member

Activity: 82

Merit: 10

Quote from: barbados-fs on May 24, 2014, 11:29:38 AM

Quote from: primouno on May 24, 2014, 11:01:26 AM

Quote from: flobdeth on May 24, 2014, 10:53:32 AM

Quote from: hanvude2424 on May 24, 2014, 10:35:32 AM

r9 270 config? , please !! Huh

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

Because you're using Yacminer Wink

FYI: the mining calc on the main page is an epic tool....use it Grin

I just added some extras to mine, works perfectly

EDIT: if any of you miners don't have this page bookmarked, go stand in the corner and be ashamed of yourselves Grin

https://litecoin.info/Mining_hardware_comparison

barbados-fs

hero member

Activity: 837

Merit: 505

нa 280x я пoлyчaю 17кH/c нa чacтoтe GPU 1100

HW=0

SET GPU_MAX_ALLOC_PERCENT=100
yacminer.exe --scrypt-chacha -o stratum+tcp://stratum.ultracoinpool.info:3333 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.leetpools.com:3333 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra2.nitro.org:4337 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.nitro.org:3337 -u barbados-2 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -R 8000 -g 1 -w 256 --buffer-size 2656 --lookup-gap 6 --auto-fan --temp-cutoff 86 --temp-overheat 80 --gpu-fan 85-95 2>logfile.txt

нa 270x пoлyчaю 10,5кH/c нa чacтoтe GPU 1200

HW=0

SET GPU_MAX_ALLOC_PERCENT=100
yacminer.exe --scrypt-chacha -o stratum+tcp://stratum.ultracoinpool.info:3333 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.leetpools.com:3333 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra2.nitro.org:4337 -ubarbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra.nitro.org:3337 -u barbados-1 -p 1 --nfmin 4 --nfmax 30 --starttime 1388361600 -g 1 -w 256 -R 10000 --buffer-size 1576 --lookup-gap 7 --auto-fan --temp-cutoff 90 --temp-overheat 85 --gpu-fan 75-95 2>logfile.txt

barbados-fs

hero member

Activity: 837

Merit: 505

Quote from: primouno on May 24, 2014, 11:01:26 AM

Quote from: flobdeth on May 24, 2014, 10:53:32 AM

Quote from: hanvude2424 on May 24, 2014, 10:35:32 AM

r9 270 config? , please !! Huh

color 6
ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 81920 -I 14 -o stratum+tcp://xxx:3333 -u xxx -p xxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale --expiry 20 --scan-time 5

What hashrate do you get?

I have these settings does not run.

fredeq

legendary

Activity: 1537

Merit: 1005

WTM updated with ultracoin nf13. Be sure to check nf13 box and input new hr/power.

http://www.whattomine.com/coins

KingCole

sr. member

Activity: 348

Merit: 250

Quote from: xwebnetwork on May 24, 2014, 11:12:36 AM

With tweaking, we should be able to pull around 22-25KHs.

What are you getting at the moment? I seem to recall you and I had similar configs previously

KC

longyenthanh

sr. member

Activity: 1221

Merit: 250

Quote from: primouno on May 24, 2014, 10:41:33 AM

What hashrate do you get comparing to before factor change? I have 1/3 of what I had before. Is it correct? I had 30 Kh/s now I get 9 Kh/s.

My R9 270 config (still tweaking):

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del scrypt*.bin
timeout /t 60
cgminer -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxxxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 128 -I 12 --thread-concurrency 70400 -g 1 --lookup-gap 6 --gpu-engine 1150 --gpu-memclock 1450 --gpu-powertune 20 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --temp-cutoff 90 --temp-overheat 85

Are u using 16GB of Ram ?

flobdeth

member

Activity: 82

Merit: 10

Quote from: hanvude2424 on May 24, 2014, 11:13:52 AM

Down from 49 this morning to 15, -I 18 no longer works, I needed to lower it, but 0 HW or rejects, will play around some more later

you get 49 kh/s with r9 270 before nfactor ?? i guess you talk about r9 280x !! Huh

nope, Gigabyte 4 gig R270x

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 126. (Read 946650 times)