[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 278.

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

Quote from: Bluemustang on April 06, 2014, 05:11:11 AM

Quote from: jakiman on April 06, 2014, 04:37:11 AM

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

Thanks, my 7970 now gets 66khs compared to the 50ish i was getting on my best attempt with ultracoin miner.

Except network diff in this new yacminer says 59k while its actually 0.8k whats up with that?

I'm glad it worked! 66Kh/s is a nice hash rate.

No idea. But yeah, it's not like the other miners were not that much better anyways with Ultracoin.
I hated it just showing the difficulty as 3. It could be 3.01 or 3.99 but it just shows as 3. Sad

Quote from: Uggle on April 06, 2014, 05:28:04 AM

Very nice ! When using yacminer one of my cards seem to be lagging behind. Works fine with cgminer. Does anyone know a good fix for this?

Try either lowering the buffer size a little or try lowering the -R a little. (Increments of 64 for each will do)

projectdimpreza

newbie

Activity: 31

Merit: 0

Quote from: jakiman on April 06, 2014, 04:37:11 AM

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

https://i.imgur.com/8R1ox3h.jpg

Does it really need to be 8GB RAM? anyone here tried 4GB RAM on YacMiner?

bullus

sr. member

Activity: 294

Merit: 250

Quote from: iqacid on April 06, 2014, 05:55:21 AM

i got 51kh from each my 7950 asus cards and the WU is 205 for 4x cards without even HW so think that is my best setting.

Code:

ultracoinminer (poolinfo) --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 60000 --intensity 18 --lookup-gap 3 --gpu-powertune 20 --worksize 256 --gpu-dyninterval 5 --no-submit-stale -g 1 --scan-time 1 --expiry 10 --queue 0

but i cant find a good setup for my 7950 vapor sapphire. could someone share his config please

What clocks are u running?

Also get about 50kh/s @1030/1500 now, no hw errors.

Code:

timeout /t 35
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
yacminer --scrypt-chacha --buffer-size 0 --lookup-gap 3 -g 1 -w 256 -R 7168 -d 0,1,2 --nfmin 4 --nfmax 30 --starttime 1388361600 -o stratum+tcp://ultra2.nitro.org:4337 -u x -p x
timeout /t 35

iqacid

full member

Activity: 238

Merit: 100

7950 Asus

1050/1575 51kh without HWs
i got 51kh from each my 7950 asus cards and the WU is 205 for 4x cards without even HW so think that is my best setting.

Code:

ultracoinminer (poolinfo) --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 60000 --intensity 18 --lookup-gap 3 --gpu-powertune 20 --worksize 256 --gpu-dyninterval 5 --no-submit-stale -g 1 --scan-time 1 --expiry 10 --queue 0

but i cant find a good setup for my 7950 vapor sapphire. i cant get more than 35kh and i have hw too so could someone share his config please?

dkdimitrov

newbie

Activity: 17

Merit: 0

we will get a lot of orphans as nitro is dictating the hash power ...

with my cards 290x i am getting constant 68 kh at utc.epari.bg but we have orphans too.

spread the load and all will be fine even for smaller pools - i believe bumface will agree with me.

bolvan

member

Activity: 84

Merit: 10

I'm upset of this coin because of Orphans. Profit calculations lie, real profit much less because of orphans

shpakov

newbie

Activity: 9

Merit: 0

Знaeт - зaкpoй бpayзep и пepeзaгpyзи мaйнep

oтcтaвaния нe бyдeт.
--------------------------------
Я пoлyчил нa 280x кapтax 64кH бeз oшибoк. GPU1200/mem1500

SET GPU_MAX_ALLOC_PERCENT=100
yacminer.exe --scrypt-chacha -o stratum+tcp://ultra.nitro.org:3337 -u _ -p _ -o stratum+tcp://ultra.leetpools.com:3333 -u _ -p _ -o stratum+tcp://ultra.minepools.us:5301 -u _ -p _ -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --nfmin 4 --nfmax 30 --starttime 1388361600 --auto-fan --temp-cutoff 90 --temp-overheat 85 --gpu-fan 75-95 2>logfile.txt

Uggle

full member

Activity: 228

Merit: 100

Quote from: jakiman on April 06, 2014, 04:47:31 AM

Quote from: jakiman on April 06, 2014, 04:37:11 AM

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

If someone can figure out how to get same or better hash rate, I'm all ears. Same for those with only 4GB rigs.
It took me a while to figure out that 1 rig I could get working had 8GB while rest had 4GB. Wasted like 5 hours.
With only 4GB RAM, the buffer won't go above 1760 for me with -R of 6144. Ending up with only about 43Kh/s.

Very nice ! When using yacminer one of my cards seem to be lagging behind. Works fine with cgminer. Does anyone know a good fix for this?

Bluemustang

member

Activity: 147

Merit: 10

Quote from: jakiman on April 06, 2014, 04:37:11 AM

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

Thanks, my 7970 now gets 66khs compared to the 50ish i was getting on my best attempt with ultracoin miner.

Except network diff in this new yacminer says 59k while its actually 0.8k whats up with that?

bumface

hero member

Activity: 728

Merit: 501

Quote from: dcgirl on April 05, 2014, 06:51:50 PM

I'd like to ask a probably stupid question, as a non-miner: for weeks we've been discussing the issue with Nitro1. Is there anything technically different about Nitro1 that makes it superior? If so, is there a reason its superiority hasn't been replicated elsewhere? And if not, and it's success is based on having a higher hash rate than any other pool, would it be feasible to just take it down entirely, and level the playing field? You could give miners plenty of warning and they could move elsewhere. As I said this is probably a dumb question, but I am really concerned that this issue has not been addressed adequately.

Stuhlman has found a bug in the wallet that is making his wallet very large (becasue he is a pool) he has to spend over 7000 dollar for a new server from his own money...
Because he is a friend and ally of UTC he never posted it and only told me in the back channels...

I think it time people know that now.

Yes, Nitro is to big, but please note that stuhlman has no mallicious intent what so ever.

I have been told there is a thing called leveldb that needs to be implemented in the wallet,as i have been told by stuhlman and biodragon.This has to be included into the next wallet update.

I am also talking with somebody about making the code more p2p mining friendly, but then he needs a newer bitcoind, and ziggy told me that would be a complete recode of UTC, and not a patchjob.

Ziggy has agreed to do the next wallet update but he is very buisy now with his education,this is also why i want to attrackt a primairy coindev for such things.

I am a bit hesitant to hire somebody i dont know , since its like letteing somebody mess with your engine....I must know they are extremely capable

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

Quote from: jakiman on April 06, 2014, 04:37:11 AM

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

If someone can figure out how to get same or better hash rate, I'm all ears. Same for those with only 4GB rigs.
It took me a while to figure out that 1 rig I could get working had 8GB while rest had 4GB. Wasted like 5 hours.
With only 4GB RAM, the buffer won't go above 1760 for me with -R of 6144. Ending up with only about 43Kh/s.

cointradero

full member

Activity: 224

Merit: 100

Quote from: Protagonus on April 05, 2014, 11:11:53 PM

@joawaywego

Glad to hear it worked out for you!! I've finalized my settings and up'ed the TC a bit more.

@ cointradero; I'm pretty sure a "share above target" is not a valid find. It's not really a reject or stale, though, so doesn't show up. Someone else may clarify better

It was an unfortunate choice of words that I used. I'm not getting the "share above target" error you get when you mine with the wrong algorithm in cgminer. I literally meant that the target difficulty, say if it were 35K, my best share would be 115K, and yet nothing would be accepted, rejected, or orphaned anywhere in either cgminer or utc wallet.

I've solved close to 1000 solo blocks across various coins. I know what I'm doing here and what I'm looking for. There is no sign that that "best share" exists at all for me.

bumface

hero member

Activity: 728

Merit: 501

Quote from: xwebnetwork on April 05, 2014, 06:34:24 PM

@BumFace [regarding Stockholm]

What a wonderful update. I am beyond ecstatic at what you have been able to do in such a short period of time. Networking like that is perhaps our greatest asset.

I understand the Arbitration portion (part 1 more specifically) is already in development. DCGirl is doing an amazing job all around. She is truly an invaluable asset. On behalf of the entire UTC community, thank you again!

Regarding the in game economy, I know you and have discussed this, but I am glad to see you've taken it further and built out the idea in a more robust and intuitive way. I think this particular development could prove unfathomably worthy.

Anyways, time to get some simple web-dev put into place. Still working on that live chat, have some exchanges to update, and would like to enhance the UTC Team layout. Time to work.

thank you, i think both of these are winning strategys,and jon matonis agreed with the arbitrage as a winning strategy.That is why we need to doo these events as much as possibly....so please people keep donating.And i alsow want 1% of ultracoin service revenue to go towards this fund.we need to do these things....

once i get asic money i will buy a dedicated machine for the ultracoin minecraft server and find a datacenter to put it in.

fredeq

legendary

Activity: 1537

Merit: 1005

For what reason scrypt-jane is named chacha in yac? Tongue

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

280x @ 55Kh/s & WU 50+

1. Used latest YACMiner. https://github.com/Thirtybird/YACMiner/releases
2. Use following settings: (Confirmed working on XFX, Asus & Gigabyte 280x)

Quote

yacminer.exe --scrypt-chacha -o -u -p -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600

Note: This will ONLY work on a PC with 8GB "physical" RAM regardless of VM size. (I tried up to 32GB)
I've confirmed this as it failed on all my 4GB rigs I have until I upgraded it to 8GB. Then it just works.
My 55Kh/s was achieved even with my 280x only running at 1025/1500 @ 1.065v. You may get higher.

If this helped, my UTC address is: Grin

UXLaLvo8L4eV9uC355WRzTX88GA7iFja2g

Uggle

full member

Activity: 228

Merit: 100

Is anyone trying to mine with the CPU yet? Grin

My cards are running really cool which is good, I can finally close my windows Cheesy

medvezhonok

newbie

Activity: 48

Merit: 0

Quote from: fredeq on April 06, 2014, 02:47:57 AM

Hey some 290 settings, this will give 62khash at 977core :

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 16 -g 1 -w 64 --thread-concurrency 85000 --lookup-gap 3

This is better than going 90000 TC with lookup-gap 4. Itensity of 17 and higher slows the system by a huge amount(at least for me). There may be room for improvement but I have already achieved 280x/290 ratio of 0.81. I have 8gb of ram + 16gb of pagefile(set as a constant).

If helped Cheesy

: UmC3d5BemAaKDhEwpiGo2EQuyYMvWDpS1r

thx! how many GPU's you have? I have 4 x 290 and the first gpu is disabled/OFF. enqueing kernel blah error.

regnevacs

full member

Activity: 182

Merit: 100

still getting share above target.. guess ill be mining CAI first Cheesy

iqacid

full member

Activity: 238

Merit: 100

i didn't read here for awhile. any changed recently? cus i got 100kh for each 7950 before and now it wont be more than 50kh

please someone tell me what happened and does ultracoin did any changed and if yes what changed

bullus

sr. member

Activity: 294

Merit: 250

R =rawintensity. I used shaders*4. Tested different R and *4 is the best for me.

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 278. (Read 946650 times)