Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 332. (Read 946650 times)
March 20, 2014, 02:16:57 AM
Just wanted to throw an update out here. First, I want to thank Biodragon for his continued input and help. Secondly, we have applied some "fixes" over at the http://ultra.leetpools.com pool. The crazy orphan rates seem to have subsided, and we have the wallet optimized to run uber fast. If you other pool owners want, pm me and I can share the optimizations that Biodragon helped me out with.
March 19, 2014, 11:32:35 PM
good coin 
March 19, 2014, 10:52:31 PM
Not sure why everyone keeps saying Nitro is stealing all the blocks. I am consistently getting less coins than it says I should in 24 hours. My daily says I should be getting 190 per day, but that number is closer to 100. Does UTC have a dependable p2pool by chance?
March 19, 2014, 10:45:10 PM
As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
Looks awesome dcgirl. I can't wait to try it!
March 19, 2014, 09:47:25 PM
I have a R9 290 + HD 5770. With previous n-factor I had no issue, now I'm getting a lot of hw errors. My config is:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u HackaB321.worker1 -p a --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 --thread-concurrency 24550,8000 -I 15,12 --lookup-gap 2 --auto-fan --temp-target 85 --temp-overheat 91 --gpu-engine 1000,880 --gpu-memclock 1500,1250 --gpu-powertune 20 --expiry 10 --scan-time 1 --queue 0
Any suggest? Thanks
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u HackaB321.worker1 -p a --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 --thread-concurrency 24550,8000 -I 15,12 --lookup-gap 2 --auto-fan --temp-target 85 --temp-overheat 91 --gpu-engine 1000,880 --gpu-memclock 1500,1250 --gpu-powertune 20 --expiry 10 --scan-time 1 --queue 0
Any suggest? Thanks
Memory is what's needed with 2560 shaders @ 1 meg
Try TC @ 42000 and you might even be able to get I 18
I know R9 290's can run that
Personally I feel likeI am getting higher WU using worksize of 64
March 19, 2014, 08:58:08 PM
@vincem
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
Thank you! You can post the image on the fb page if you want, with a "coming soon" title.
March 19, 2014, 08:45:50 PM
hi,
it's me again
I am trying to configure a bat file (windows 8.1) for sgminer for mining UTC on http://utc.pool.pm/and it does not work at all
I tried :
(xx being my worker name and yy my worker password)
Can somebody help ? What am i doing wrong ?
Thanks
it's me again
I am trying to configure a bat file (windows 8.1) for sgminer for mining UTC on http://utc.pool.pm/and it does not work at all
I tried :
Code:
sgminer -k scrypt-jane -o stratum+tcp://pickaxe.pool.pm:3306 -u xx -p yy
(xx being my worker name and yy my worker password)
Can somebody help ? What am i doing wrong ?
Thanks
March 19, 2014, 08:26:54 PM
@vincem
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
Thank you! You can post the image on the fb page if you want, with a "coming soon" title.
March 19, 2014, 08:21:03 PM
@vincem
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
Cool thanks for that.
Im doing a few things on the lottery site to make it display perfectly on all resolutions and phones/tablets
Good Job
March 19, 2014, 08:19:58 PM
Thank you verymuch !
March 19, 2014, 07:55:14 PM
@vincem
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
You only need to that for solo mining. For pool mining, simply open the wallet and let it sync the block chain, no configuration required.
@Jacques21
I have added the lottery notification to the Facebook page. I've got to add the site to the services as well. Reworking that page, though, in addition to several other additions. Good luck everyone!
@dcgirl
Absolutely stunning!
March 19, 2014, 07:51:19 PM
hi guys,
I would like to start mining UTC and joined https://utc.pool.pm.
I would like to configure my wallet (with ultracoin.conf file in User App Data Roaming Ultracoin in Windows 8 I suppose).
But I can't find the info anywhere, I think it should be something a bit like this but with different settings :
Could anyone help ?
Thank you
I would like to start mining UTC and joined https://utc.pool.pm.
I would like to configure my wallet (with ultracoin.conf file in User App Data Roaming Ultracoin in Windows 8 I suppose).
But I can't find the info anywhere, I think it should be something a bit like this but with different settings :
Code:
listen=1
maxconnections=32
rpcuser=user
rpcpassword=password
server=1
rpcallowip=192.168.0.4:7777
addnode=85.195.118.163
algo=qubit
maxconnections=32
rpcuser=user
rpcpassword=password
server=1
rpcallowip=192.168.0.4:7777
addnode=85.195.118.163
algo=qubit
Could anyone help ?
Thank you
March 19, 2014, 07:26:42 PM
hmmmmm, I'm not getting close those numbers with my current setup. The best I can manage is with my original setting of about 84Khs per card and a WU of:
GPU 0 = WU: 72.6
GPU 1 = WU: 84.6
GPU 2 = WU: 75.6
GPU 3 = WU: 72.6
I tried increasing TC to 191712 and adding --lookup-gap 3, however; that dropped my hash rate to the 60's and my WU to the 50's. My invalid % also went up on my mining pool.
Wirly, would you be willing to share your .conf or .bat file so I can give it a shot on my system?
GPU 0 = WU: 72.6
GPU 1 = WU: 84.6
GPU 2 = WU: 75.6
GPU 3 = WU: 72.6
I tried increasing TC to 191712 and adding --lookup-gap 3, however; that dropped my hash rate to the 60's and my WU to the 50's. My invalid % also went up on my mining pool.
Wirly, would you be willing to share your .conf or .bat file so I can give it a shot on my system?
I have the hd7950 Boost edition stock oc is 925/1250
also my system memory is 8gb dram @ 1600mhz
Here my .bat settings:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 --thread-concurrency 16128 --no-submit-stale --lookup-gap 2 --gpu-reorder -I 12 --gpu-vddc 1.12 --auto-gpu --gpu-powertune 20 --gpu-engine 925-1100
--gpu-memclock 1250 --gpu-fan 65 --temp-overheat 80 --temp-cutoff 90 --queue 0 --scan-time 1 --expiry 10
this gave me hashrate 104 kh/s,
then changed win virtual memory set to "manual" at "22000mb" (64gb ssd drive) for programs- Not let windows decide and this increased hashrate by 10% to 114kh/s and a WU of 93 to 110 on 11 cards. This surprised me
Edit: now I am getting the occasional random hw error, not sure if this is related to pool difficulty or anything else but wu is still good so I will let it go for a bit and see what happens. Don't want to lower the "cha-ching" rate if don't have to!
Hey, thanks for posting your .bat . I have 4x Sapphire Dual-X (SKU 11196-19-20G) stock clock 850Mhz/925Mhz boost clock. Other than that, my setup looks identical to yours. I tried this .bat and got my hash rate up to 90, WU rate also increased, which is awesome but...bad news bears - one card went *dead* after a few hours of mining.
I think this has to do with my cards not getting enough power. I see your vddc setting is 1.12(0?), I have mine flashed to 1.113 and I don't think cgminer was able to bump up the voltage through the .bat I'll try flashing to 1.125v and 1.131v and see what happens.
What does --gpu-reorder accomplish?
--gpu-reorder attempts to number the gpu according to the pci-e slots on the mob, just for reference purpose. Be careful overvolting this card, it is the one thing that will fry the vrm, watch out for throttling, a sure sign of running to much power. It would be safer to just find settings that work. just put engine clock lower until it is stable and accept what hashrate it gives you.
March 19, 2014, 06:28:54 PM
Very nice DCGirl!
March 19, 2014, 06:24:49 PM
laterbreh: ziggy says the client is multithread
March 19, 2014, 06:20:34 PM
As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
Looks very good DCGirl
KC
March 19, 2014, 06:16:38 PM
As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
that looks absolutely fantastic
March 19, 2014, 05:41:45 PM
1 question. how did the some of the candles open lower than the last candles close ? i think there is something wrong
yes, I need to go over the numbers, make sure they're right (same with candle color). They will be when its released.
March 19, 2014, 05:38:00 PM
As promised, here's a screenshot of the chart so far. I'm working on the orderbook, then history, then need to set it up to stream to the user (instead of the user pulling the data, it will be pushed). A few more days and it will be ready...
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
(Other changes - shorten decimal numbers, verify numbers are correct, more dynamic candlesticks, cryptsy and mintpal charts, compare three exchanges on a chart). I also have a lot of other things planned, but this will be release 1.
Thats looks great!
March 19, 2014, 05:34:41 PM
when we receive the block find bonus ? I found 2 blocks today but only got 50utc.(utc.pool.pm)
Jump to: