Bumface, is this normal that after more than 1 month bagholding in my wallet my stake is still 0 instead of what appeared over last month?
Also, no news about nitro2 pool and NITRO has got 1600-1700 miners by now, as well as 75% or more of the total hashrate.
Something does not compute here.
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 335. (Read 946650 times)
March 19, 2014, 09:56:41 AM
March 19, 2014, 09:46:50 AM
i am getting 177 kh/s with 1040/1250 with 290 WU:470 and getting 171 kh/s with 1000/1250 WU:560
Getting more WU is better than getting more kh/s?
Getting more WU is better than getting more kh/s?
March 19, 2014, 09:33:16 AM
Could someone please share working ultracoin-gt for Ubuntu ?
Downloaded one from start post, but when launching
Already intsalled
Anyway produce same error.
Downloaded one from start post, but when launching
Code:
./Ultracoin-qt
./Ultracoin-qt: error while loading shared libraries: libminiupnpc.so.9: cannot open shared object file: No such file or directory
Code:
apt-get install libminiupnpc-dev
March 19, 2014, 07:53:01 AM
Anyone have a new nodes to boost connect the wallet ? Now is SLOWWW .
March 19, 2014, 06:41:02 AM
Im holding and buying now.
starting to think i need to put more of what i have into selling and buying these ups and downs though could have easily more than quadrupled the amount i have if i rode a few of the waves that seemed sure to go down.
i just keep thinking if i dump on the highs i'm just adding to part of the problem so i don't.
my luck too id dump and the price would literally sky rocked 5 seconds later and id never see those utc again.. thats the kind of luck i have in things.
starting to think i need to put more of what i have into selling and buying these ups and downs though could have easily more than quadrupled the amount i have if i rode a few of the waves that seemed sure to go down.
i just keep thinking if i dump on the highs i'm just adding to part of the problem so i don't.
my luck too id dump and the price would literally sky rocked 5 seconds later and id never see those utc again.. thats the kind of luck i have in things.
March 19, 2014, 06:25:59 AM
Buying in blocks at cryptsy at the moment, reinvesting LTC profits 
Also thinking this coins highly undervalued at the moment, the transfer times are amazing.
Also thinking this coins highly undervalued at the moment, the transfer times are amazing.
March 19, 2014, 06:09:11 AM
utc $5
buy, hold, or mine.
buy, hold, or mine.
I agree, eventually everyone will see that this coin is pretty much a gem floating in an ocean of shit.
I'm with both of you. I don't even look at the price anymore. It's all about the community for me. The price will catch up in due course and we will all look back on whatever it's trading at now and think, "if I would have only bought more when it was that cheap."
March 19, 2014, 05:30:43 AM
So what are the nasty error logs ?
also any idea's on why reject rate is higher ?
even after falling over to backup pools rejects have dropped drastically
mining on the p2p reminds me of greek pool with their 10~20% orphans vs pickaxe's 1~3% per 100 blocks
p2p went down just when I was going to toss more HASH at it
I was setting up 3x rigs (another 18x R9 290's ) for testing I wanted to find that darn block
on another note I waisted my entire afternoon to only just realize now I forgotten to change the bios flash switch position on a rig I was trying to work out why it kept hanging after I 13 when i was wanting I 18 still tweaking an 64 bit OS for mining with,
cryptoslax is doing the job , just need to change its partition type fat 32 way to slow .. but that's what the instructions said to use ... ext4 is still prototype stage so I guess ext3 will have to do
also any idea's on why reject rate is higher ?
even after falling over to backup pools rejects have dropped drastically
mining on the p2p reminds me of greek pool with their 10~20% orphans vs pickaxe's 1~3% per 100 blocks
p2p went down just when I was going to toss more HASH at it
I was setting up 3x rigs (another 18x R9 290's ) for testing I wanted to find that darn block
on another note I waisted my entire afternoon to only just realize now I forgotten to change the bios flash switch position on a rig I was trying to work out why it kept hanging after I 13 when i was wanting I 18 still tweaking an 64 bit OS for mining with,
cryptoslax is doing the job , just need to change its partition type fat 32 way to slow .. but that's what the instructions said to use ... ext4 is still prototype stage so I guess ext3 will have to do
There were a few errors in the logs, and some shares seemed to be lost, i will debug all the current issues later today and give it another test later today, but overall the result was positive as the work was sent right and addresses recognized with their shares and shares accepted, so that's a good thing.
Regarding the rejects, i noticed that too, but p2p will need a config tweak compared to regular pools, also i had 2 r9 290 cards (HIS) which had 1% or less rejects and another 2 sapphire ones which had 10% rejects using the same config so i guess the rejects issues can be solved.
Glad to know you had more power to help me test, just keep it in leash until later today
Also I use ext4 without any problems on most of my servers, works just perfect!
Thanks for your help in testing!
March 19, 2014, 04:47:24 AM
utc $5
buy, hold, or mine.
buy, hold, or mine.
I agree, eventually everyone will see that this coin is pretty much a gem floating in an ocean of shit.
March 19, 2014, 03:11:55 AM
So what are the nasty error logs ?
also any idea's on why reject rate is higher ?
even after falling over to backup pools rejects have dropped drastically
mining on the p2p reminds me of greek pool with their 10~20% orphans vs pickaxe's 1~3% per 100 blocks
p2p went down just when I was going to toss more HASH at it
I was setting up 3x rigs (another 18x R9 290's ) for testing I wanted to find that darn block
on another note I waisted my entire afternoon to only just realize now I forgotten to change the bios flash switch position on a rig I was trying to work out why it kept hanging after I 13 when i was wanting I 18 still tweaking an 64 bit OS for mining with,
cryptoslax is doing the job , just need to change its partition type fat 32 way to slow .. but that's what the instructions said to use ... ext4 is still prototype stage so I guess ext3 will have to do
also any idea's on why reject rate is higher ?
even after falling over to backup pools rejects have dropped drastically
mining on the p2p reminds me of greek pool with their 10~20% orphans vs pickaxe's 1~3% per 100 blocks
p2p went down just when I was going to toss more HASH at it
I was setting up 3x rigs (another 18x R9 290's ) for testing I wanted to find that darn block
on another note I waisted my entire afternoon to only just realize now I forgotten to change the bios flash switch position on a rig I was trying to work out why it kept hanging after I 13 when i was wanting I 18 still tweaking an 64 bit OS for mining with,
cryptoslax is doing the job , just need to change its partition type fat 32 way to slow .. but that's what the instructions said to use ... ext4 is still prototype stage so I guess ext3 will have to do
March 19, 2014, 02:54:16 AM
Important: UTC first p2pool down for maintenance
Thanks for all people who helped with the tests, I have to take down the p2pool now as i see some warnings and errors I don't like in the logs, so i prefer to take it down and go through these first so i don't waste your hashpower, no block was found so far. Thanks again for your support!
I will certainly fix it later today, most of it is working fine, I just want to make sure there are no errors whatsoever so everyone will be happy!
Thanks again for your help testing!
Just when I wanted to test
Keep up the good work, and once it works, share the code. Will put another two p2pool servers up, so we spread the infrastructure.
March 19, 2014, 02:54:00 AM
Important: UTC first p2pool down for maintenance
Thanks for all people who helped with the tests, I have to take down the p2pool now as i see some warnings and errors I don't like in the logs, so i prefer to take it down and go through these first so i don't waste your hashpower, no block was found so far. Thanks again for your support!
I will certainly fix it later today, most of it is working fine, I just want to make sure there are no errors whatsoever so everyone will be happy!
Thanks again for your help testing!
I hope you do well!!!!
March 19, 2014, 02:34:20 AM
Important: UTC first p2pool down for maintenance
Thanks for all people who helped with the tests, I have to take down the p2pool now as i see some warnings and errors I don't like in the logs, so i prefer to take it down and go through these first so i don't waste your hashpower, no block was found so far. Thanks again for your support!
I will certainly fix it later today, most of it is working fine, I just want to make sure there are no errors whatsoever so everyone will be happy!
Thanks again for your help testing!
March 19, 2014, 02:30:38 AM
Important: UTC first p2pool down for maintenance
Thanks for all people who helped with the tests, I have to take down the p2pool now as i see some warnings and errors I don't like in the logs, so i prefer to take it down and go through these first so i don't waste your hashpower, no block was found so far. Thanks again for your support!
March 19, 2014, 02:20:39 AM
Important: UTC first p2pool down for maintenance
Thanks for all people who helped with the tests, I have to take down the p2pool now as i see some warnings and errors I don't like in the logs, so i prefer to take it down and go through these first so i don't waste your hashpower, no block was found so far. Thanks again for your support!
March 19, 2014, 01:35:05 AM
can someone do a Ultracoind getpeerinfo
I would like to compile an addnodes list
I would like to compile an addnodes list
Here below is the 111 peers connected to my server
http://pastebin.com/0PP6ge7w
Looks like I am connected to you .. I see my IP
*edit*
looks like the p2p is DOWN!!!
March 19, 2014, 01:34:38 AM
ST:1 SS:81 NB: 2265 LW:37195
OK go ahead and laugh but I give up. What do these exactly mean in cgminer console? I've been mining for quite some time but I can not find any documentation on these. I like to play the guessing game but ...when I first started a while back I guessed HW meant hard worker so when my gpu had a 1000 of them I thought "damn that gpu is a hard worker"...lol!
In the order I guessed...
ST=???
SS= stupid shit, stale shares ?
NB= nice boobs, no boobs? Does cgminer look for that?
LW = longwong, length of work?
Seriously, its driving me nuts!
OK go ahead and laugh but I give up. What do these exactly mean in cgminer console? I've been mining for quite some time but I can not find any documentation on these. I like to play the guessing game but ...when I first started a while back I guessed HW meant hard worker so when my gpu had a 1000 of them I thought "damn that gpu is a hard worker"...lol!
In the order I guessed...
ST=???
SS= stupid shit, stale shares ?
NB= nice boobs, no boobs? Does cgminer look for that?
LW = longwong, length of work?
Seriously, its driving me nuts!
Since UltraCoinMiner is derived from Cgminer, the terminology is the same.
Head over to http://www.kaostheory.net/ and click "Understanding the Cgminer Interface". There you go.
March 19, 2014, 01:27:17 AM
cya guys goodluck with UTC hope all goes well im out
Bye, lol.
March 19, 2014, 01:15:31 AM
can someone do a Ultracoind getpeerinfo
I would like to compile an addnodes list
I would like to compile an addnodes list
Here below is the 111 peers connected to my server
http://pastebin.com/0PP6ge7w
Thank you!!
March 19, 2014, 01:04:02 AM
can someone do a Ultracoind getpeerinfo
I would like to compile an addnodes list
I would like to compile an addnodes list
Here below is the 111 peers connected to my server
http://pastebin.com/0PP6ge7w
Jump to: