Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 539. (Read 946654 times)

full member
Activity: 154
Merit: 100
Settings for 270x @ 83.5kh  ... no HW errors

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 24000 --gpu-engine 1000 --gpu-memclock 1400 --gpu-powertune 20
mine crashed by this setting
newbie
Activity: 9
Merit: 0
ugh...had to set -I 12 to get rid of HW errors. I have 3x 7950s each at 66kh right now.

put:  -G 1 -I 18 -W 512 --thread-concurrency 35840   rest of your setting should be fine.
                                                           (1792 x 20)
See if that gets you to 120Kh/s range


thanks for the suggestions. my config file and miner thank you. i'm getting 114kh at -I 18
full member
Activity: 174
Merit: 100
My 280x settings. Getting 140khs x 4 cards.

setx GPU_FORCE_64BIT_PTR=1
setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
del *.bin
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u [username] -p [password] --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -s 1 -E 10 -I 18 -g 1 --gpu-engine 1100 --gpu-memclock 1500 --thread-concurrency 24000 --auto-fan --gpu-powertune 20 --queue 0 --temp-target 70 --temp-overheat 80 --gpu-fan 75-95
full member
Activity: 210
Merit: 100
Nice retort Cointradero Smiley And rightly so.
full member
Activity: 182
Merit: 100
full member
Activity: 224
Merit: 100
diff 1..  Grin

ill share it if u give some love guys: UTC: UWjrnKtgMmRNnU2uP5R145ERzF4VSJw1iE



Considering I've almost got mine stable at 30% higher rates, I think I'll pass.  But I might donate to everyone that doesn't tell you my settings when I get them finalized. 
full member
Activity: 182
Merit: 100
diff 1..  Grin

ill share it if u give some love guys: UTC: UWjrnKtgMmRNnU2uP5R145ERzF4VSJw1iE

legendary
Activity: 1537
Merit: 1005
well, have got 2 of my 280x at 75ish, putting out 200ish WU, the third is also at around 75, but only giving a WU of 20-30, something wrong with the card? or is it all just random?


**EDIT** only got 4GB RAM in the system, will this need upgrading?

If the correct settings use very high TC then upgrade for 8gb may be needed.
Now I regret buying only 4gb sticks :/
full member
Activity: 210
Merit: 100
sorry got crashed.. i have130 on my 280x.. but its freaking lag. let me optimized first before sharing.



+1
newbie
Activity: 13
Merit: 0
sorry got crashed.. i have130 on my 280x.. but its freaking lag. let me optimized first before sharing.



just share your settings, we can test it out
full member
Activity: 182
Merit: 100
sorry got crashed.. i have130 on my 280x.. but its freaking lag. let me optimized first before sharing.

full member
Activity: 210
Merit: 100
well, have got 2 of my 280x at 75ish, putting out 200ish WU, the third is also at around 75, but only giving a WU of 20-30, something wrong with the card? or is it all just random?


**EDIT** only got 4GB RAM in the system, will this need upgrading?
full member
Activity: 224
Merit: 100
Anyone able to run 290 on I of 13 or higher please post your settings.

I am using official ultracoinminer.

I'm still working on it, even 18 seems to be giving me HW errors now.  


This is the same thing Vertcoin did to me, I could run 2 just fine, but 4 requires me to lower the intensity to ridiculous levels. 

Oddly enough, lowering thread concurrency down to 8xxx caused even more problems. 
legendary
Activity: 1537
Merit: 1005
Anyone able to run 290 on I of 13 or higher please post your settings.

I am using official ultracoinminer.

I'm still working on it, even 18 seems to be giving me HW errors now.  


This is the same thing Vertcoin did to me, I could run 2 just fine, but 4 requires me to lower the intensity to ridiculous levels. 

I am using only two 290 in this rig. It must be ram... please confirm you have 8gb?
full member
Activity: 238
Merit: 100


okay I have my 7950's doing 125 Kh/s each no HW errors

I'm running -w 512  -I 18 -TC 35k-40k    1050/1500 and 1080/1600 clocks

Really just changed the TC and dropped intensity as I was running 19.   Tc in the 35k -40K range not changing WU yet.   Can't say whats optimal there atm

this helped me my on my 7950.

any advice for 280x?

I don't have any of the new cards.  However the 280's seem to end up similar to 7950's I believe.   Try running similar settings, just change TC to 40,960  (2048 x 20)
sr. member
Activity: 951
Merit: 252
Settings for 270x @ 83.5kh  ... no HW errors

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 24000 --gpu-engine 1000 --gpu-memclock 1400 --gpu-powertune 20
full member
Activity: 224
Merit: 100
Anyone able to run 290 on I of 13 or higher please post your settings.

I am using official ultracoinminer.

I'm still working on it, even 18 seems to be giving me HW errors now.  


This is the same thing Vertcoin did to me, I could run 2 just fine, but 4 requires me to lower the intensity to ridiculous levels. 
full member
Activity: 210
Merit: 100
Bingo on my 280xs... running 130+ each no HW errors.. still trying to figure out how it can increase more..

What settings do you have pls? thanks Smiley
member
Activity: 224
Merit: 10


okay I have my 7950's doing 125 Kh/s each no HW errors

I'm running -w 512  -I 18 -TC 35k-40k    1050/1500 and 1080/1600 clocks

Really just changed the TC and dropped intensity as I was running 19.   Tc in the 35k -40K range not changing WU yet.   Can't say whats optimal there atm

this helped me my on my 7950.

any advice for 280x?
legendary
Activity: 1537
Merit: 1005
Anyone able to run 290 on I of 13 or higher please post your settings.

I am using official ultracoinminer.
Jump to: