Oh i see. You guys are running the 280x overclocked to over 1100MHz and with high voltage.
That would use about 30-40W per card more than now for me to get about 10% higher WU.
Hmm. I guess the gain is still better in the long run. I'll try it out.
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 620. (Read 946654 times)
February 19, 2014, 04:50:26 PM
February 19, 2014, 04:32:54 PM
Thnx for the answers. I mine with two 280x cards and have been tweeking them for a week now. The cards max out at 272khs each. I have tried everything! All the suggestions everyone has posted here and even re-downlaoded the jane scrypt miner and tried that. When i use to mine doge, feather and litecoin i always ran 730 khs each. I use to get 570 before the n factor kicked in but that was still low i thought. Anyone else have a card problem? Saphire 280x cards.
I have multiple Gigabyte 280x, Asus 280x and XFX 280x. No matter what, I can't break 300KH/s with them.
For those who get over 300KH/s with 280x, what driver version are you using?
February 19, 2014, 04:28:59 PM
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -g 2 -w 256 -I 12,12 --lookup-gap 2 --thread-concurrency 8193,8193 --gpu-engine 1115,1115 --gpu-memclock 1500,1500
in bold is what i have changed since diff dropped and i get 306 ish hash each card
2 x 280x
in bold is what i have changed since diff dropped and i get 306 ish hash each card
2 x 280x
February 19, 2014, 04:23:12 PM
Thnx for the answers. I mine with two 280x cards and have been tweeking them for a week now. The cards max out at 272khs each. I have tried everything! All the suggestions everyone has posted here and even re-downlaoded the jane scrypt miner and tried that. When i use to mine doge, feather and litecoin i always ran 730 khs each. I use to get 570 before the n factor kicked in but that was still low i thought. Anyone else have a card problem? Saphire 280x cards.
I have multiple Gigabyte 280x, Asus 280x and XFX 280x. No matter what, I can't break 300KH/s with them.
For those who get over 300KH/s with 280x, what driver version are you using?
February 19, 2014, 04:16:09 PM
Anybody know where I can see the total hash rate of the network? It's not showing on any pool, or the ultracoin site.
http://ultra.nitro.org/
Anybody know where I can see the total hash rate of the network? It's not showing on any pool, or the ultracoin site.
debug window -> getmininginfo -> look for networkhashps
thank you both
February 19, 2014, 04:12:18 PM
Thnx for the answers. I mine with two 280x cards and have been tweeking them for a week now. The cards max out at 272khs each. I have tried everything! All the suggestions everyone has posted here and even re-downlaoded the jane scrypt miner and tried that. When i use to mine doge, feather and litecoin i always ran 730 khs each. I use to get 570 before the n factor kicked in but that was still low i thought. Anyone else have a card problem? Saphire 280x cards.
I'm around 320KH/s on an MSI card.. February 19, 2014, 04:07:32 PM
Anybody know where I can see the total hash rate of the network? It's not showing on any pool, or the ultracoin site.
debug window -> getmininginfo -> look for networkhashps
February 19, 2014, 03:49:23 PM
Thnx for the answers. I mine with two 280x cards and have been tweeking them for a week now. The cards max out at 272khs each. I have tried everything! All the suggestions everyone has posted here and even re-downlaoded the jane scrypt miner and tried that. When i use to mine doge, feather and litecoin i always ran 730 khs each. I use to get 570 before the n factor kicked in but that was still low i thought. Anyone else have a card problem? Saphire 280x cards.
February 19, 2014, 03:45:28 PM
Anybody know where I can see the total hash rate of the network? It's not showing on any pool, or the ultracoin site.
http://ultra.nitro.org/
February 19, 2014, 03:43:29 PM
Anyone explain to me why my worker khs is always 150-200 higher than my actually hashrate on nitro?
when you submit a share, it has a specific hashrate lower than the total
if you get lucky and submit more shares in a round you will have hashrate > than your actual hashrate
for example my 290x mines at 400KH/s
if it submits shares very rare I may have on the pool a 200KH/s hashrate
if my card submits with a bit of luck more shares I get even 600KH/s
tl;dr your pool hashrate is calculated from accepted shares and not your actual processing power
Another thing I've seen is that on MPOS-Pools with VARDIFF the calculation gets wrong if a worker gets
another DIFF.
BTW, don't forget voting:
http://www.allcrypt.com/beta/voting.php
on https://www.mintpal.com/voting we need just a few votes to overtake the next coin.
February 19, 2014, 03:42:39 PM
Anybody know where I can see the total hash rate of the network? It's not showing on any pool, or the ultracoin site.
February 19, 2014, 03:41:13 PM
Something very fishy with crypto-trade
everytime we start to go up site crashes with that 500 error
everytime we start to go up site crashes with that 500 error
February 19, 2014, 03:37:09 PM
Anyone explain to me why my worker khs is always 150-200 higher than my actually hashrate on nitro?
when you submit a share, it has a specific hashrate lower than the total
if you get lucky and submit more shares in a round you will have hashrate > than your actual hashrate
for example my 290x mines at 400KH/s
if it submits shares very rare I may have on the pool a 200KH/s hashrate
if my card submits with a bit of luck more shares I get even 600KH/s
tl;dr your pool hashrate is calculated from accepted shares and not your actual processing power
February 19, 2014, 03:34:18 PM
Anyone explain to me why my worker khs is always 150-200 higher than my actually hashrate on nitro?
the hash you see on nitro is from the shares you submitted in a certain time
sometimes its higher sometimes its lower the correct hash is what you see on the miner
February 19, 2014, 03:24:45 PM
Anyone explain to me why my worker khs is always 150-200 higher than my actually hashrate on nitro?
February 19, 2014, 03:23:25 PM
February 19, 2014, 03:14:37 PM
Damn nice work guys! Now how much do we have to pay to be on btc-e lol
I would stay away from BTC-E. They ripped me off for $500USD and their support has made no effort to get my money back. You've been warned.for the record btc-e support refunded 400ltc that got lost in the cyberwebs during a ddos rather quickly once i contacted them.
February 19, 2014, 03:09:01 PM
i have a wallet on my windows pc for ultracoin but i need the cgminer too work.
thanks.
thanks.
February 19, 2014, 03:08:16 PM
i have linux ubuntu and i need that my ultracoin cgminer works on linux. i have load the cgminer build for linux but there is no .sh data in there.
I dug a bit in past pages. I'm pretty darn sure someone posted instructions in the thread here somewhere, but can't seem to find them.
I found this online, if it helps
http://www.reddit.com/r/ultracoinmining/comments/1xri7x/compile_the_ultracoin_wallet_on_linux/
Seem he just needs cgminer, but I don't know how to explain that all in english...
I can upload you a compiled cgminer for Ubuntu 13.10 64bit with ADL if that would help you therealrock.
February 19, 2014, 03:05:58 PM
i have linux ubuntu and i need that my ultracoin cgminer works on linux. i have load the cgminer build for linux but there is no .sh data in there.
I dug a bit in past pages. I'm pretty darn sure someone posted instructions in the thread here somewhere, but can't seem to find them.
I found this online, if it helps
http://www.reddit.com/r/ultracoinmining/comments/1xri7x/compile_the_ultracoin_wallet_on_linux/
Jump to: