Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 624. (Read 946654 times)

full member
Activity: 182
Merit: 100
Just submitted UTC in coming CoinPayment vote
https://bitcointalksearch.org/topic/coinpayments-coin-vote-471792




UTC: Uc7eG2Qf7F7h3mX32uCjwGcHBwBFyevUa8

This vote will be started soon! Let's vote UTC then  Cheesy
newbie
Activity: 48
Merit: 0
I got no luck anywhere else, so my hopes are someone from crypto-trade sees this here instead.

I tried to transfer some BTC off crypto-trade well over 16 hours ago for an opportunity. The transfer has been stuck in "waiting" since then. 12 hours ago I wrote a ticket asking them to cancel my withdrawal because the opportunity wasn't there anymore due to the slow transfer.

So far nothings happened with my transfer, nor my ticket. And admins in the shoutbox doesn't answer any of my questions.

So, how long has it taken everyone else to withdraw btc?


20 hours average afaik.
newbie
Activity: 22
Merit: 0
I got no luck anywhere else, so my hopes are someone from crypto-trade sees this here instead.

I tried to transfer some BTC off crypto-trade well over 16 hours ago for an opportunity. The transfer has been stuck in "waiting" since then. 12 hours ago I wrote a ticket asking them to cancel my withdrawal because the opportunity wasn't there anymore due to the slow transfer.

So far nothings happened with my transfer, nor my ticket. And admins in the shoutbox doesn't answer any of my questions.

So, how long has it taken everyone else to withdraw btc?
sr. member
Activity: 322
Merit: 250
I have a rig of 3X7950 and for some reason, after more than a few days of mining UTC, it began to crash. I have screen lockups and only hard-reset helps.
When I restart the mining, it works for a few minutes, then the screen freezes and the rig does not respond.

Any idea?


HW errors due to Nfactor change ?


sounds like intensity is too high ?

does it still mine other coins fine for long periods ?


I just proved today the cards run cooler mining UTC then other coins , I decided to mine with the spare R9 290 thats in my file server / multimedia pc

it normally runs fine around low 70's running flat 900 mhz on UTC , put it on multipool today and instantly flagged GPU over heating its currently at 75 deg 95% fan speed running under 500mhz now
room temp high 40's sweating my ass off

There are a few HW errors.
OS is W7 x64 SP1 Ultimate

Other rigs mine without problems with even higher intensity.
If I remember correctly the Catalyst version is smthn like 12.8
It was once recommended.

I tried mining in windows too as my first rig starts to lock up frequently, but it was NOT releated to the OS.

After changing to a better power supply I never had any lockups anymore.

 
full member
Activity: 140
Merit: 100
I have a rig of 3X7950 and for some reason, after more than a few days of mining UTC, it began to crash. I have screen lockups and only hard-reset helps.
When I restart the mining, it works for a few minutes, then the screen freezes and the rig does not respond.

Any idea?


HW errors due to Nfactor change ?


sounds like intensity is too high ?

does it still mine other coins fine for long periods ?


I just proved today the cards run cooler mining UTC then other coins , I decided to mine with the spare R9 290 thats in my file server / multimedia pc

it normally runs fine around low 70's running flat 900 mhz on UTC , put it on multipool today and instantly flagged GPU over heating its currently at 75 deg 95% fan speed running under 500mhz now
room temp high 40's sweating my ass off

There are a few HW errors.
OS is W7 x64 SP1 Ultimate

Other rigs mine without problems with even higher intensity.
If I remember correctly the Catalyst version is smthn like 12.8
It was once recommended.
newbie
Activity: 54
Merit: 0
actually you know what i had a simillar lockup today while mining on a pc i was webbrowsing with. never ever had a single issue on this pc before the n-factor perhaps this man is onto something.

screen just locked solid.
full member
Activity: 426
Merit: 100
I have a rig of 3X7950 and for some reason, after more than a few days of mining UTC, it began to crash. I have screen lockups and only hard-reset helps.
When I restart the mining, it works for a few minutes, then the screen freezes and the rig does not respond.

Any idea?


HW errors due to Nfactor change ?


sounds like intensity is too high ?

does it still mine other coins fine for long periods ?


I just proved today the cards run cooler mining UTC then other coins , I decided to mine with the spare R9 290 thats in my file server / multimedia pc

it normally runs fine around low 70's running flat 900 mhz on UTC , put it on multipool today and instantly flagged GPU over heating its currently at 75 deg 95% fan speed running under 500mhz now
room temp high 40's sweating my ass off
sr. member
Activity: 322
Merit: 250
I have a rig of 3X7950 and for some reason, after more than a few days of mining UTC, it began to crash. I have screen lockups and only hard-reset helps.
When I restart the mining, it works for a few minutes, then the screen freezes and the rig does not respond.

Any idea?

OS, Versions?

Catalyst Version?

newbie
Activity: 28
Merit: 0
ya admin said they replacing the Server for Realtime-Chats.
full member
Activity: 140
Merit: 100
I have a rig of 3X7950 and for some reason, after more than a few days of mining UTC, it began to crash. I have screen lockups and only hard-reset helps.
When I restart the mining, it works for a few minutes, then the screen freezes and the rig does not respond.

Any idea?
legendary
Activity: 1638
Merit: 1011
jakiman is back!
crypto-trade have been dead silent ...

I guess you saw but they said they will refund you that money.
But it sounds as though it won't be put in the priority queue unless you bribe them...
full member
Activity: 426
Merit: 100
mmm well I guess that does explain it then

crap wounder how I can get them back out of the DGC wallet then
I was assuming it was dogecoin ...

their goes that idea I was going to trade em for UTC Tongue


http://dogechain.info is showing doge coin is in their again  maybe I used DGC blockchain search before ?

thanks heaps

crypto-trade have been dead silent ...

and chat box does not work for me :S

*edit * ok major chat lag in that box , and I thought btc-e troll box was laggy

just going by the chat reply , is it me or are those chinaman ?

thanks heaps Miesling + jakiman

back to craptsy I go :S

*edit*

crypto-trade  are going to charge an arm and leg just to recover the dodge , they reckon i am lucky they are even going to give back 25% of my coin
member
Activity: 84
Merit: 10

http://ULTRA.leetpools.com

Why should you mine with us?
-Active pool operator. Lives, breathes, and tastes crypto. Its my life and my teams life.
-Active Admins
-Great IRC Community.
-Original Launch-Day Ultracoin Mining Pool
-1% Fee
-Constant Promos
-Unique and CLEAN MPOS interface.

PROP VARDIFF!!!

No email confirmations required! Just register and start hashing!!!

Come chill in IRC #Leetpools on quakenet

Time to start mining like a boss.
CSL
newbie
Activity: 37
Merit: 0
on another note if anyone can tell me how to recover 60 mill Dodge I sent from multipool to crypto-trade I am all ears ,

I fired away an email when only 2.7 coins showed up on my trade account and the rest was still showing on block chain as arrived to their wallet , after a week of no support reply I looked into it again today , now no sign the 60 mil ever arrived to the crypto-trade wallet ?
Considering that Crypto-Trade don't handle Doge, I'm wondering how you are seeing 2.7 coins on your account at all.  Those 2.7 coins are probably in some other currency, and entirely unrelated to the transfer.  No wonder you didn't get an answer from support.
newbie
Activity: 28
Merit: 0
Crypto-Trade doens't trade DOGE.
DGC = Digitalcoin

U've to write another Supportmail or try catch admin in chat , i think he can recover ur coins
newbie
Activity: 54
Merit: 0
xwebnetwork  looks really good man. clean yet modern looking.
sr. member
Activity: 522
Merit: 266
I know he had posted his balance (depicted via a screen cap) a few pages back but not sure about the OP link to the wallet.

Also, I am pasting this here again. I seem to post my updates at the page break which can minimize the constructive criticisms I am striving to obtain. Hopefully this will provide some additional exposure!



+1 looks slick. You are omitting forum on purpose ?....... Just being sarcastic
newbie
Activity: 24
Merit: 0
loving that website design man!!

And about his wallet, no he did not I am also waiting, he posted a screenshot.
I pressured him to post an address on his irc channel and eventually after talking around the topic for a while he gave me an address but it said 0 in the blockchain.
After which he claimed this was because the blockchain browser was broken.

I hope he will post this address, and I hope he does it soon.
hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
I know he had posted his balance (depicted via a screen cap) a few pages back but not sure about the OP link to the wallet.

Also, I am pasting this here again. I seem to post my updates at the page break which can minimize the constructive criticisms I am striving to obtain. Hopefully this will provide some additional exposure!

legendary
Activity: 1638
Merit: 1011
jakiman is back!
BTW, what happened to this particular part which bumface promised on the OP? Did it eventuate?

Quote
We will have the balance of our wallets visible on our homepage so everybody can see when we sell coins from our personal wallet. The reason we do this is because we feel there are too many coins where the premine is left unexplained and there are vague wallets with unidentified coins and owners.
Jump to: